Monster 1080P User manual

Brand: Monster

Model: 1080P

Type: User manual

PLASMA & FLATSCREEN

Plasmas, Especially in High Definition, Can Provide an Incredible Picture,

But Only with the Right Connections

• To get the highest resolution video (1080p), you need to use an HDMI cable, which carries both

the video and audio signal. To get a lower resolution High Definition video (720p, 1080i), you need

to use DVI or component video cables. S-Video or composite video connections should only

be used when other video connections are not available.

• To get Dolby Digital® and DTS® surround sound, you need to use fiber optic or coaxial digital

audio cables.

• How far is your plasma from your video source? Make sure you get the right cable lengths.

• For the best possible picture and sound, plus protection from surges and spikes,

use a Monster PowerCenter™ with Clean Power®.

VIDEO OUTPUT

COMPONENT VIDEO

Y CB CR

COMPONENT VIDEO

Y CB CR

VIDEO INPUT DIGITAL AUDIO IN

COAXIAL

OPTICAL

ANT IN

VIDEO OUTPUT

COMPONENT VIDEO

Y CB CR

DIGITAL AUDIO OUT

COAXIAL

OPTICAL

VIDEO INPUT

COMPONENT VIDEO

Y CB CR

VIDEO S-VIDEO

USE OF A RECEIVER IS REQUIRED

IN ORDER TO BENEFIT FROM

DOLBY DIGITAL

SURROUND SOUND.

USE EITHER COAX

OR OPTICAL FOR DIGITAL 5.1

PowerCenter

™

COAX

OUT IN

FROM HD ANTENNA

ANALOG

AUDIO

AUDIO OUTPUT

SUB

OUT

ANALOG

AUDIO

AUDIO INPUT

HDMI (or DVI)

AMPLIFIED

SUBWOOFER

Monster HDMI Connection Tip

Certain A/V receivers, digital cable/satellite receivers, DVD

players and digital TVs may not output/process audio or repeat

HDCP encoding when connected via HDMI—causing loss of

audio or connection failure.

You may need to connect using Component Video and Digital

Audio connections, depending upon your system equipment.

Check products manuals and visit MonsterHDMICertified.com

for the latest HDMI device compatibility info!

Monster 1080P User manual

Monster 1080P User manual

Related papers

Other documents