Workzone YLW6281D Owner's manual
- Category
- Vacuum cleaners
- Type
- Owner's manual
This manual is also suitable for
Xfinity Li-ION 20V
Instruction Manual
IMPORTANT
Read carefully before use
Keep for future reference
MODEL NUMBER
YLW6281D
Version number: 003
Wet & Dry Vacuum skin
@
/
•
1 x 20V Li-ion Wet & Dry Vacuum
Cleaner - Skin
•
1 x
Wide Nozzle Tool attachment
• 1 x Dusting brush attachment
• 1 x Crevice Tool attachment
• 1 x 1.8m Vacuum hose
• 1 x HEPA filter
• 1 x Instruction Manual
• 1 x Warranty Card
2
2
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
Welcome
Congratulations in choosing to buy a Workzone® Titanium 20V Wet &
Dry Vacuum (battery / charger not included).
All products bought to you by Workzone® Titanium are manufactured
to the highest standards of performance and safety and, as part of our
philosophy of customer service and satisfaction, are backed by our
comprehensive 5 Year Warranty. We hope you will enjoy your purchase
for many years to come.
When you open your packaging, rst remove all items and check there
are no parts damaged or missing. If you nd anything wrong, do not
operate the product until the parts have been replaced or the fault has
been rectied. Failure to do so could result in serious personal injury.
3
3
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
The product is guaranteed to be free from defects in workmanship and parts for a period of 60 months from the
date of purchase. Defects that occur within this warranty period, under normal use and care, will be repaired,
replaced or refunded at our discretion. T
conferred by this warranty are in addition to all rights and
remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled
to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or
damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Warranty Details
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
20V Wet & Dry Vacuum
4
4
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
Contents
Application 5
Package Content List 5
Parts description 6
Description of symbols 8
General safety warnings 9
Important information – Product care 10
Assembly 10
Operation 14
Maintenance 17
Storage and Transportation 19
Warranty 20
Environmental protection 21
Troubleshooting 22
Technical specications 24
5
5
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
1. Application
20V Wet & Dry Vacuum
2. Package Content List
First time users or inexperienced operators pay particular attention to the
operation of the 20V Wet & Dry Vacuum, including details of starting and
stopping and correct use of the 20V Wet & Dry Vacuum on pages 14-16 , as well
as the maintenance instructions on pages 17-20.
Intended use of 20V Wet & Dry Vacuum (battery / charger not included)
NOTE: This product is for private domestic DIY use only. It is not suitable for
commercial or trade use.
This 20V Wet & Dry Vacuum is suitable for private home use i.e for use with
cleaning dirt, debris and liquids from garages, workshops, as well as dust
extraction function.
The Wet & Dry Vacuum is to be used only for its prescribed purpose. Any
other use is deemed to be a case of misuse.
• 1 x 20V Li-ion Wet & Dry Vacuum Cleaner
- Skin
• 1 x Wide Nozzle Tool attachment
• 1 x Dusting brush attachment
• 1 x Crevice Tool attachment
• 1 x 1.8m Vacuum hose
• 1 x HEPA lter
• 1 x Instruction Manual
• 1 x Warranty Card
• Remove all packing materials
• Ensure all parts on the
contents list are present
• Check the appliance, and all
accessories for transportation
damages
WARNING! Please read and understand this instruction manual
before use and keep it for your future reference. Your product should
only be passed on together with this instruction manual.
WARNING! To reduce risk of injury, only use ALDI 20V Li-Ion Xnity
Plus battery packs. Other type of battery packs may burst causing
personal injury and damage. The battery pack must be recharged
only with an ALDI 20V Li-Ion Xnity Plus battery charger.
6
6
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
3. Parts description
1. Battery pack*
2. Battery pack release button*
3. On-board holder x 2
4. Carry handle
5. Appliance head
6. Tank
7. Side locking latch x 2
8. On/O switch
9. Hose outlet - Blower
10. Screw
11. Hose outlet - Suction
12. Hose holder
13. HEPA lter (with lock/unlock
plug)
14. Dusting brush
15. Crevice tool
16. Wide nozzle tool
17. Body connection
18. 1.8m Heavy-Duty crush resistant
vacuum hose
19. Accessories connection
20. Filter basket
21. Safety oat valve
22. Battery port
* Battery and charger shown only for illustrative purposes. Battery and
Charger not included with this Wet & Dry Vacuum.
7
7
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
21
1
2
3
4
5
1
6
7
8
9
10
11
12 13
14
15
16
17
18 19
20
22
8
8
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
4. Description of symbols
The instruction manual, rating plate, or on the product itself, may
show these symbols. These represent important information about
the product or instructions on its use.
Read Operator’s Manual
Warning
Wear ear protection
Wear eye protection
Wear breathing protection
Conforms to relevant standards for electrical safety and
electromagnetic compatibility.
60 Months Warranty
60
9
9
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
5. General safety warning
Product safety
General safety warnings
WARNING: Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
- This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
- Rechargeable batteries are to be removed from the appliance
before being charged;
- Batteries are to be inserted with the correct polarity;
- Exhausted batteries are to be removed from the appliance and
safely disposed of;
- If the appliance is to be stored unused for a long period, the
batteries should be removed;
- The supply terminals are not to be short-circuited.
10
10
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
6. Important information – Product care
NOTE: Xfinity Battery and Charger not included. For any issuses
related directly to your purchased ALDI Xfinity Battery / charger,
contact the Customer Service of the manufacturer as listed on the
battery / charger packaging, manual or on the label on the battery /
charger.
This 20V Wet & Dry Vacuum uses Lithium Ion Battery Cells. Care
MUST be taken to ensure both the safety and life of the pack is
maintained. Ensure you have read all of the safety notes in the
previous pages before using the 20V Wet & Dry Vacuum.
Treat the battery pack with care and within the guidelines of this
manual.
If the battery pack does become immersed in water or any fluids,
or is subject to a severe drop or it does not operate within the
guidelines of this manual or the supplied manual, immediately STOP
using the battery pack and have it checked.
Use only ALDI Xfinity Plus 20V range of batteries and chargers.
7. Assembly
WARNING! To prevent serious injury from accidental
operation, remove the battery pack and make sure that
On/Off switch is in “O” position while undertaking any assembly
or maintenance.
7.1 To remove and install the appliance head (5).
To remove:
1)
Pull out the bottom of the side locking latch (7) to loosen the locked
part of the appliance head (5) from the tank (6) for one side. (See Fig. A1)
Then open the locking hook of the side locking latch (7). (See Fig. A2)
2) Release the other side with the same steps above.
3) Remove the appliance head (5).
To install:
1) Place the appliance head (5) on the tank (6) correctly. (See Fig. A3)
11
11
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
2) Align the side locking latch (7) with the notch on the ridge of the
appliance head (5) lip. (See Fig. A4). Then press the side locking latch (7)
down to fasten the engaged part to lock the appliance head (5) for one
side.(See Fig. A5).
3) Lock the other side with the same steps above.
4) The appliance head (5) is locked on the tank (6) firmly.
7.2 Assembling the hose holder (12)
1) To attach the hose holder (12), firstly remove the assembly screw
(10) by turning it in an anti-clockwise direction using a philips head
screwdriver (Not supplied). (See Fig. B1)
2)
Align the raised key-shaped part of the hose holder (12) with the
caved key-shaped part on the rear bottom of the wet & dry vacuum
vacuum. You will feel the two parts engage if done correctly. Insert
the screw (10) through the screw hole on the hose holder (12), then
through the hole of the key-shaped part on the rear bottom of the
A1
A2
A3 A4
A5
12
12
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
wet & dry vacuum. (See Fig. B2)
3) Tighten the screw (10) using a philips head screwdriver (Not
supplied) in a clockwise direction until tight.(See Fig. B3)
7.3 Assembling the accessories for wet & dry vacuuming
To assemble the 1.8m Heavy-Duty crush resistant vacuum hose (18) to
hose outlet - suction (11) :
1)
Insert the 1.8m Heavy-Duty crush resistant vacuum hose (18) into hose
outlet - suction (11) and align the locking pin on the body connection
(17) with the groove on the hose outlet - suction (11). (See Fig. C1)
2) Turn the body connection (17) in a clockwise direction to secure the
hose (18) into position. (See Fig. C2)
To assemble the dusting brush (14) / crevice tool (15) / wide nozzle
tool (16) to the 1.8m Heavy-Duty crush resistant vacuum hose (18) :
1)
For wet & dry vacuuming, either the dusting brush (14) , crevice
tool (15) or wide nozzle tool (16) can be added to accessories
B2
B3
B1
C1 C2
13
13
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
connection (19) by simply inserting them in until they are secure. (See
Fig. C3)
7.4 Assembling the accessories for blowing
To assemble the 1.8m Heavy-Duty crush resistant vacuum hose (18) to
hose outlet - blower (9) :
1)
Insert the 1.8m Heavy-Duty crush resistant vacuum hose (18) into hose
outlet - blower (9) and align the locking pin on the body connection (17)
with the groove on the hose outlet - blower (9). (See Fig. D1)
2) Turn the 1.8m Heavy-Duty crush resistant vacuum hose (18) in a
clockwise direction to secure the hose (18) into position (See Fig. D2)
7.5 To remove or install the battery pack (1) ( not supplied )
Depress the battery pack release button (2) firmly first and then
slide the battery pack (1) out from the battery port (22). (See Fig. E1)
D1 D2
C3
14
14
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
Slide the fully charged battery pack (1) onto the battery port (22)
with sufficient force until it clicks into position. (See Fig. E2)
8. Operation
8.1 Switching on and off (See Fig. F)
Switch Position 0: OFF (All operations shut off)
Switch Position I: For normal vacuuming operation (wet or dry)
NOTE: When the maximum filling capacity is reached, switch off the
machine immediately. Before opening and emptying, always remove
the battery pack (1).
NOTE: Empty the tank into a bin or sink depending on the type of
waste. Only dispose of liquid waste into household sinks & drains
if safe to do so. Improper disposal of hazardous waste can cause
pollution and harm.
E1 E2
F
1
2
ON
OFF
15
15
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
8.2 Wet vacuuming & Dry vacuuming
NOTE: Never use the wet and dry vacuum without the HEPA filter
installed.
WARNING: This wet and dry vacuum is not suitable for the
vacuuming of combustible liquids.
1) Ensure the tank (6) is completely dry and free from dust and dirt.
2) Always ensure that the HEPA filter (13) is secure.
3) Make sure the correct wet vacuuming or dry vacuuming
accessories are fitted according to the required working condition:
*
Wide nozzle tool (16) can be used to vacuum spilled liquids or dry
waste from carpets or hard floors. (See Fig. G1, G2).
* Dusting brush (14) can be used to vacuum dust from keyboards or
other items that collect dust. (See Fig. G3).
*
Crevice tool (15) can be used to vacuum small liquid spills or dry dirt
from corners, gaps or other hard to reach places. (See Fig. G4)
4) For dust extraction, the 1.8m Heavy-Duty crush resistant vacuum
hose (18) can connect to dust extraction outlets of AC/electric power
tools.(See Fig. G5)
5) Make sure the battery pack (1) is installed.
6) Press the “I” on the On/Off switch (8) to turn on the vacuum.
WARNING! Check the tank (6) regularly and empty the
waste collected when it is about 2/3 full.
WARNING! When wet vacuuming, the Safety float valve
(21) closes when the maximum tank (6) level is reached. In
doing so, the suction noise of the vacuum will change and
become louder. When this happens, you must switch off the
vacuum and empty the tank (6).
16
16
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
8.3 Blowing
WARNING! Wear a dust mask and eye protection if blowing
creates dust that might be inhaled.
WARNING! Keep bystanders clear from blowing debris.
WARNING! Any material left in the tank (6) may be blown out,
causing injury.
1) Ensure the tank (6) is empty and completely dry before using it as
a blower.
2) Make sure 1.8m Heavy-Duty crush resistant vacuum hose (18) is
connected to the hose outlet - blower (9).
3)
Before switching ON, ensure you are firmly holding the accessories
connection (19) of the 1.8m Heavy-Duty crush resistant vacuum
hose (18).
4) Make sure the battery pack (1) is installed.
5) Press the “I” on the On/Off switch (8) to turn on the blowing function.
G1 G2
G4
G3
G5
17
17
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
9. Maintenance
WARNING: Remove the battery pack (1) from the wet &
dry vacuum before carrying out any adjustment,
servicing or maintenance.
• Always store your power tool in a dry place. Keep all working
controls free of dust.
• We recommend that you clean and dry the appliance immediately
after each use.
9.1 Cleaning the appliance head (5)
• Clean the appliance head (5) regularly with a damp cloth and
some soap followed by wiping down and drying before storing
away.
• Do not submerse the appliance head (5) in water or allow water to
enter the appliance head (5).
• Do not use cleaning agents or solvents. These may be aggressive
to the plastic parts on the appliance.
9.2 Cleaning the tank (6)
• The tank (6) can be cleaned with a damp cloth and soap or rinsed
under running water depending on the amount of dirt. Wipe down
and dry before storing away.
9.3. Cleaning the HEPA filter (13)
1) Remove the appliance head (5). Refer to 7.1.
2) Put the appliance head (5) upside down. (See Fig. H1).
3) Unlock the middle lock/unlock plug of the HEPA filter (13) by
turning it in an anti-clockwise direction. (See Fig. H2).
4) Set aside the lock/unlock plug. Remove the HEPA filter (13) by
pulling it up. (See Fig. H3)
5) Clean the HEPA filter (13) regularly by carefully patting it and
cleaning it with a fine brush or hand brush (not supplied).
18
18
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
NOTE: Do not submerse the HEPA filter in water. Do not use a
damp cloth to clean.
6) After finishing cleaning of HEPA filter (13), put it back on the
appliance head (5) by aligning the two notchs on the HEPA filter
(13) onto the two notches on the filter basket (20). (See Fig. H4).
Then replace the lock/unlock plug in the HEPA filter (13) by inserting
the bottom two sides sockets of the lock/unlock plug into the
grooves of the HEPA filter (13).(See Fig.H5). Rotate the lock/unlock
plug clockwise to lock the HEPA filter (13) onto the appliance head
(5) firmly. (See Fig. H6).
7) Re-install the appliance head (5).Refer to 7.1.
H4 H5 H6
H1
H2 H3
1
2
19
19
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
9.4. Check the safety float valve (21)
Check the Safety Float Valve (21) often to ensure it moves freely
within the filter basket (20). To do this, take the appliance head (5) by
the handle and tip it carefully so that the filter basket (20) is facing
upwards. The safety float valve (21) should move freely up and down.
9.5. General Maintenance
Before each use, inspect the general condition of the appliance and
check for the following:
• Loose hardware or screws.
• Misalignment or binding of moving parts.
• Check HEPA filter (13) is securely fitted.
• Damaged or cracked tank (6).
• Any other condition that may affect safe operation.
For battery tools
The ambient temperature range for tool and battery use and storage
is 0
o
C - 40
o
C.
The recommended ambient temperature range for the charging
system during charging is 0
o
C - 40
o
C.
10. Storage and Transportation
•Before storing, remove the battery pack.
•For short term storage:
1)
Use hose holder (12) to attach the body of 1.8m Heavy-Duty crush
resistant vacuum hose (18). (See Fig. I1). Put the wide nozzle tool (16)
connected with 1.8m Heavy-Duty crush resistant vacuum hose (18) on
the carry handle (4). (See Fig. I2)
2) Put the dusting brush (14) / crevice tool (15) into the On-board
holders (3). (See Fig. I2)
20
20
AFTER SALES SUPPORT
1300 889 028 (toll free)
e-mail:
MODEL No.:
YLW6281D • 700234 • 01/2020
•For long term storage:
Store the wet & dry vacuum, battery pack and the accessories in a
dry, clean place which is protected from the effects of weather and
temperature and is out of the reach of children and animals.
For transportation in vehicles, remove the battery pack and the
accessories, secure the product against movement or falling to prevent
injury to persons or damage to this wet & dry vacuum.
11.Warranty
Your new WORKZONE
®
TITANIUM 20V Wet & Dry Vacuum will more than
satisfy your expectations.
It has been manufactured under stringent WORKZONE
®
TITANIUM Quality
Standards to meet superior performance criteria.
You will find your new 20V Wet & Dry Vacuum easy and safe to operate,
and, with proper care, it will give you many years of dependable service.
CAUTION. Carefully read through this entire instruction manual before
using your new WORKZONE
®
TITANIUM 20V Wet & Dry Vacuum. Take
special care to heed the Cautions and Warnings.
Your WORKZONE
®
TITANIUM 20V Wet & Dry Vacuum has many features
that will make your job faster and easier. Safety, performance, and
dependability have been given top priority in the development of this 20V
Wet & Dry Vacuum, making it easy to maintain and operate.
I1 I2
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
Workzone YLW6281D Owner's manual
- Category
- Vacuum cleaners
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Workzone Titanium WG20V Owner's manual
-
-
ALDI Z10 Owner's manual
-
-
-
-
-
-
-
