Simplicity SIMPLICITY PRESTIGE 27HP TRACTORS AND MOWER DECKS User manual

Category
Lawnmowers
Type
User manual

This manual is also suitable for

Prestige Series
1752401
Revision C
en
Operator’s Manual
es
Manual del usuario
Hydro Tractors
Mfg. No. Description
2690953 Prestige, 27HP Hydro 2WD w/PS RMO Tractor Only
2690954 Prestige, 27HP Hydro 4WD w/PS RMO Tractor Only
Mower Decks
Mfg. No. Description
1695551 46” Mower Deck (2WD)
1695591 46” Mower Deck (4WD)
1695177 54” Mower Deck (2WD)
1595266 54” Mower Deck (4WD)
Not for
Reproduction
2
Not for
Reproduction
3
(180kg)
396 Lbs.
10˚
3'4"
(1m)
20' (6m)
A
B
3
4
7
A
B
C
D
H
G
F E
B
A
A
B
C
2
5
B
A
6
Not for
Reproduction
4
A
8
10
A
C
B
Thicker Spoke
Faces Seat
11
Radio más
grueso hacia el
asiento
9
D
C
E
A
B
A
Not for
Reproduction
CONTENTS
Illustrations .......................................................................................................... 3
Contents ...............................................................................................................5
Operator Safety ...................................................................................................6
Features and Controls ......................................................................................12
Operation ...........................................................................................................16
Safety Interlock System Tests ..........................................................................16
Maintenance ......................................................................................................19
Troubleshooting ................................................................................................ 22
Warranties ..........................................................................................................24
Speci cations ....................................................................................................26
Parts and Accessories ......................................................................................26
General Information
Thank you for purchasing this quality-built SIMPLICITY riding mower. We’re pleased that you’ve placed your con dence
in the SIMPLICITY brand. When operated and maintained according to the instructions in this manual, your SIMPLICITY
product will provide many years of dependable service.
This manual contains safety information to make you aware of the hazards and risks associated with mowers and how
to avoid them. Because Briggs & Stratton Power Products Group, LLC does not necessarily know all the applications
this mower could be used for, it is important that you read and understand these instructions. Save these original
instructions for future reference.
The Illustrated Parts List for this machine can be downloaded from www.simplicitymfg.com. Please provide model and
serial number when ordering replacement parts.
Copyright © 2011 Briggs & Stratton Power Products Group, LLC
Milwaukee, WI, All rights reserved.
SIMPLICITY is a trademark of Briggs & Stratton Power Products
Group, LLC Milwaukee, WI USA.
ENGINE REFERENCE DATA
Model Description Name/Number
Unit MFG
Number
PRODUCT REFERENCE DATA
Unit SERIAL Number
Dealer Name
Date Purchased
Engine Make
Engine Type/Spec
Engine Model
Engine Code/Serial Number
Mower Deck MFG Number
Mower Deck SERIAL
Number
When contacting your authorized dealer for replacment
parts, service, or information you MUST have these
numbers.
Record your model name/number, manufacturer’s identi ca-
tion numbers, and engine serial numbers in the space pro-
vided for easy access. These numbers can be found in the
locations shown.
Product Identification Tag
Model / Modéle / Model xxxxxxxx
Serial / Sèrie / Serie xxxxxxxxxx
Briggs & Stratton Power Products Group, L.L.C.
Milwaukee, WI 53201 USA
Product ID Tag
Product Identi cation Tag
Product Reference Data
5
en
Not for
Reproduction
Operating Safety
Power equipment is only as safe as the operator. If it is misused, or
not properly maintained, it can be dangerous! Remember, you are
responsible for your safety and that of those around you.
Use common sense, and think through what you are doing. If you
are not sure that the task you are about to perform can be safely
done with the equipment you have chosen, ask a
professional: contact your local authorized dealer.
Read the Manual
The operator’s manual contains important safety information you
need to be aware of BEFORE you operate your unit as well as DUR-
ING operation.
Safe operating techniques, an explanation of the product’s features
and controls, and maintenance information is included to help you get
the most out of your equipment investment.
Be sure to completely read the Safety Rules and Information found on
the following pages. Also completely read the Operation section.
Children
Tragic accidents can occur with children. Do not allow them
anywhere near the area of operation. Children are often at-
tracted to the unit and mowing activity. Never assume that
children will remain where you last saw them. If there is a
risk that children may enter the area where you are mowing,
have another responsible adult watch them.
DO NOT GIVE CHILDREN RIDES ON THIS UNIT! This
encourages them to come near the unit in the future while it
is running, and they could be seriously hurt. They may then
approach the unit for a ride when you are not expecting it,
and you may run over them.
Reverse
Do not mow in reverse unless abso-
lutely necessary. Always look down
and behind before and
while traveling in reverse
even with the mower
blades disengaged.
OPERATOR SAFETY
6
Not for
Reproduction
7
3.5 ft
(1,5 m)
20.0 ft (6,0 m)
Slope Operation
You could be seriously injured or even killed if you use this unit on too
steep an incline. Using the unit on a slope that is too steep or where you
don’t have adequate traction can cause you to lose control or roll over.
A good rule of thumb is to not operate on any slope you cannot back up
(in 2-wheel drive mode). You should not operate on inclines with a slope
greater than a 3.5 ft (1,5 m) rise over a 20.0 ft (6,0 m) length. Always
drive up and down slopes: never cross the face.
Also note that the surface you are driving on can greatly impact stability
and control. Wet grass or icy pavement can seriously a ect your ability to
control the unit.
If you feel unsure about operating the unit on an incline, don’t do it. It’s
not worth the risk.
Moving Parts
This equipment has many moving parts that can injure you or someone else.
However, if you are seated in the seat properly, and follow all the rules in this
book, the unit is safe to operate.
The mower deck has spinning mower blades that can amputate hands and
feet. Do not allow anyone near the equipment while it is running!
To help you, the operator, use this equipment safely, it is equipped with an
operator-present safety system. Do NOT attempt to alter or bypass the system.
See your dealer immediately if the system does not pass all the safety interlock
system tests found in this manual.
Thrown Objects
This unit has spinning mower blades. These blades can pick up and throw debris
that could seriously injure a bystander. Be sure to clean up the area to be mowed
BEFORE you start mowing.
Do not operate this unit without the entire grass catcher or discharge guard (de-
ector) in place.
Also, do not allow anyone in the area while the unit is running! If someone does
enter the area, shut the unit o immediately until they leave.
Fuel and Maintenance
Gasoline is extremely ammable. Its vapors are also extremely ammable and
can travel to distant ignition sources. Gasoline must only be used as a fuel, not
as a solvent or cleaner. It should never be stored any place where its vapors can
build up or travel to an ignition source like a pilot light. Fuel belongs in an ap-
proved, plastic, sealed gas can, or in the tractor fuel tank with the cap securely
closed. Spilled fuel needs to be cleaned up immediately.
Proper maintenance is critical to the safety and performance of your unit. Be sure
to perform the maintenance procedures listed in this manual, especially periodi-
cally testing the safety system.
OPERATOR SAFETY
en
Not for
Reproduction
GENERAL OPERATION
1. Read, understand, and follow all instructions in the
manual and on the unit before starting.
2. Do not put hands or feet near rotating parts or under
the machine. Keep clear of the discharge opening at
all times.
3. Only allow responsible adults, who are familiar with
the instructions, to operate the unit (local regulations
can restrict operator age).
4. Clear the area of objects such as rocks, toys, wire,
etc., which could be picked up and thrown by the
blade(s).
5. Be sure the area is clear of other people before mow-
ing. Stop the unit if anyone enters the area.
6. Never carry passengers.
7. Do not mow in reverse unless absolutely necessary.
Always look down and behind before and while travel-
ling in reverse.
8. Never direct discharge material toward anyone. Avoid
discharging material against a wall or obstruction. Ma-
terial may ricochet back toward the operator. Stop the
blade(s) when crossing gravel surfaces.
9. Do not operate the machine without the entire grass
catcher, discharge guard (de ector), or other safety
devices in place.
10. Slow down before turning.
11. Never leave a running unit unattended. Always dis-
engage the PTO, set parking brake, stop engine, and
remove keys before dismounting.
12. Disengage blades (PTO) when not mowing. Shut o
engine and wait for all parts to come to a complete
stop before cleaning the machine, removing the grass
catcher, or unclogging the discharge guard.
13. Operate the machine only in daylight or good arti cial
light.
14. Do not operate the unit while under the in uence of
alcohol or drugs.
15 Watch for tra c when operating near or crossing
roadways.
16. Use extra care when loading or unloading the unit into
a trailer or truck.
17. Always wear eye protection when operating this unit.
18. Data indicates that operators, age 60 years and
above, are involved in a large percentage of power
equipment-related injuries. These operators should
evaluate their ability to operate the equipment safely
enough to protect themselves and others from injury.
19. Follow the manufacturer’s recommendations for wheel
weights or counterweights.
20. Keep in mind the operator is responsible for accidents
occurring to other people or property.
21. All drivers should seek and obtain professional and
practical instruction.
22. Always wear substantial footwear and trousers. Never
operate when barefoot or wearing sandals.
23. Before using, always visually check that the blades
and blade hardware are present, intact, and secure.
Replace worn or damaged parts.
24. Disengage attachments before: refueling, removing an
attachment, making adjustments (unless the adjust-
ment can be made from the operator’s position).
25. When the machine is parked, stored, or left unat-
tended, lower the cutting means unless a positive me-
chanical lock is used.
26. Before leaving the operator’s position for any reason,
engage the parking brake (if equipped), disengage the
PTO, stop the engine, and remove the key.
27. To reduce re hazard, keep the unit free of grass,
leaves, & excess oil. Do not stop or park over dry
leaves, grass, or combustible materials.
28. It is a violation of California Public Resource Code
Section 4442 to use or operate the engine on or near
any forest-covered, brush-covered, or grass-covered
land unless the exhaust system is equipped with a
spark arrester meeting any applicable local or state
laws. Other states or federal areas may have similar
laws.
Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control
of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This
mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signi-
es important cautions or warnings which must be followed.
TRANSPORTING AND STORAGE
1. When transporting the unit on an open trailer, make
sure it is facing forward, in the direction of travel. If the
unit is facing backwards, wind lift could damage the
unit.
2. Always observe safe refueling and fuel handling prac-
tices when refueling the unit after transportation or
storage.
3. Never store the unit (with fuel) in an enclosed poorly
ventilated structure. Fuel vapors can travel to an igni-
tion source (such as a furnace, water heater, etc.)
and cause an explosion. Fuel vapor is also toxic to
humans and animals.
4. Always follow the engine manual instructions for stor-
age preparations before storing the unit for both short
and long term periods.
5. Always follow the engine manual instructions for
proper start-up procedures when returning the unit to
service.
6. Never store the unit or fuel container inside where
there is an open ame or pilot light, such as in a water
heater. Allow unit to cool before storing.
OPERATOR SAFETY
8
Not for
Reproduction
9
CHILDREN
Tragic accidents can occur if the operator is not alert to the
presence of children. Children are often attracted to the unit
and the mowing activity. Never assume that children will
remain where you last saw them.
1. Keep children out of the mowing area and under the
watchful care of another responsible adult.
2. Be alert and turn unit o if children enter the area.
3. Before and during reverse operation, look behind and
down for small children.
4. Never carry children, even with the blade(s) o . They
may fall o and be seriously injured or interfere with
safe unit operation. Children who have been given
rides in the past may suddenly appear in the mowing
area for another ride and be run over or backed over
by the machine.
5. Never allow children to operate the unit.
6. Use extra care when approaching blind corners,
shrubs, trees, or other objects that may obscure vi-
sion.
EMISSIONS
1. Engine exhaust from this product contains chemicals
known, in certain quantities, to cause cancer, birth de-
fects, or other reproductive harm.
2. Look for the relevant Emissions Durability Period and
Air Index information on the engine emissions label.
IGNITION SYSTEM
1. This spark ignition system complies with Canadian
ICES-002.
SLOPE OPERATION
Slopes are a major factor related to loss-of-control and tip-
over accidents, which can result in severe injury or death.
Operation on all slopes requires extra caution. If you cannot
back up the slope or if you feel uneasy on it, do not operate
on it.
Control of a walk-behind or ride-on machine sliding on a
slope will not be regained by the application of the brake.
The main reasons for loss of control are: insu cient tire grip
on the ground, speed too fast, inadequate braking, the type
of machine is unsuitable for its task, lack of awareness of
the ground conditions, incorrect hitching and load distribu-
tion.
1. Mow up and down slopes, not across.
2. Watch for holes, ruts, or bumps. Uneven terrain could
overturn the unit. Tall grass can hide obstacles.
3. Choose a slow speed so that you will not have to stop
or change speeds while on the slope.
4. Do not mow on wet grass. Tires may loose traction.
5. Always keep unit in gear especially when traveling
down slopes. Do not shift to neutral and coast down-
hill.
6. Avoid starting, stopping, or turning on a slope. If tires
lose traction, disengage the blade(s) and proceed
slowly straight down the slope.
7. Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction,
which could cause the machine to rollover.
8. Use extra care while operating machines with grass
catchers or other attachments; they can a ect the sta-
bility of the unit. Do not use on steep slopes.
9. Do not try to stabilize the machine by putting your foot
on the ground (ride-on units).
10. Do not mow near drop-o s, ditches, or embankments.
The mower could suddenly turn over if a wheel is over
the edge of a cli or ditch, or if an edge caves in.
11. Do not use grass catchers on steep slopes.
12. Do not mow slopes you cannot back up them.
13. See your authorized dealer/retailer for recommenda-
tions of wheel weights or counterweights to improve
stability.
14. Remove obstacles such as rocks, tree limbs, etc.
15. Use slow speed. Tires may lose traction on slopes
even through the brakes are functioning properly.
16. Do not turn on slopes unless necessary, and then,
turn slowly and gradually downhill, if possible.
TOWED EQUIPMENT (RIDE-ON UNITS)
1. Tow only with a machine that has a hitch designed for
towing. Do not attach towed equipment except at the
hitch point.
2. Follow the manufacturer’s recommendations for
weight limit for towed equipment and towing on
slopes.
3. Never allow children or others in or on towed equip-
ment.
4. On slopes, the weight of the towed equipment may
cause loss of traction and loss of control.
5. Travel slowly and allow extra distance to stop.
6. Do not shift to neutral and coast down hill.
WARNING
Never operate on slopes greater than 17.6 percent
(10°) which is a rise of 3-1/2 feet (106 cm) vertically in
20 feet (607 cm) horizontally.
When operating on slopes use additional wheel
weights or counterweights. See your dealer/retailer
to determine which weights are available and
appropriate for your unit.
Select slow ground speed before driving onto slope.
In addition to front weights, use extra caution when
operating on slopes with rear-mounted grass catchers.
Mow UP and DOWN the slope, never across the face,
use caution when changing directions and DO NOT
START OR STOP ON SLOPE.
OPERATOR SAFETY
en
Not for
Reproduction
SERVICE AND MAINTENANCE
Safe Handling of Gasoline
1. Extinguish all cigarettes, cigars, pipes, and other
sources of ignition.
2. Use only approved gasoline containers.
3. Never remove the gas cap or add fuel with the engine
running. Allow the engine to cool before refueling.
4. Never fuel the machine indoors.
5. Never store the machine or fuel container where there
is an open ame, spark, or pilot light such as near a
water heater or other appliance.
6. Never ll containers inside a vehicle or on a truck bed
with a plastic bed liner. Always place containers on
the ground away from your vehicle before lling.
7. Remove gas-powered equipment from the truck or
trailer and refuel it on the ground. If this is not possi-
ble, then refuel such equipment on a trailer with a por-
table container, rather than from a gasoline dispenser
nozzle.
8. Keep nozzle in contact with the rim of the fuel tank or
container opening at all times until fueling is complete.
Do not use a nozzle lock-open device.
9. If fuel is spilled on clothing, change clothing immedi-
ately.
10. Never over- ll the fuel tank. Replace gas cap and
tighten securely.
11. Use extra care in handling gasoline and other fuels.
They are ammable and vapors are explosive.
12. If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors
have dissipated.
13. Replace all fuel tank caps and fuel container caps se-
curely.
Service & Maintenance
1. Never run the unit in an enclosed area where carbon
monoxide fumes may collect.
2. Keep nuts and bolts, especially blade attachment
bolts, tight and keep equipment in good condition.
3. Never tamper with safety devices. Check their proper
operation regularly and make necessary repairs if they
are not functioning properly.
4. Keep unit free of grass, leaves, or other debris build-
up. Clean up oil or fuel spillage. and remove any fuel-
soaked debris. Allow machine to cool before storage.
5. If you strike an object, stop and inspect the machine.
Repair, if necessary, before restarting.
6. Never make adjustments or repairs with the engine
running.
7. Check grass catcher components and the discharge
guard frequently and replace with manufacturer’s rec-
ommended parts, when necessary.
8. Mower blades are sharp. Wrap the blade or wear
gloves, and use extra caution when servicing them.
9. Check brake operation frequently. Adjust and service
as required.
10. Maintain or replace safety and instructions labels, as
necessary.
11. Do not remove the fuel lter when the engine is hot as
spilled gasoline may ignite. Do not spread fuel line
clamps further than necessary. Ensure clamps grip
hoses rmly over the lter after installation.
12. Do not use gasoline containing METHANOL, gasohol
containing more than 10% ETHANOL, gasoline addi-
tives, or white gas because engine/fuel system dam-
age could result.
13. If the fuel tank must be drained, it should be drained
outdoors.
14. Replace faulty silencers/mu ers.
15. Use only factory authorized replacement parts when
making repairs.
16. Always comply with factory speci cations on all set-
tings and adjustments.
17. Only authorized service locations should be utilized for
major service and repair requirements.
18. Never attempt to make major repairs on this unit un-
less you have been properly trained. Improper service
procedures can result in hazardous operation, equip-
ment damage and voiding of manufacturer’s warranty.
19. On multiple blade mowers, take care as rotating one
blade can cause other blades to rotate.
20. Do not change engine governor settings or over-
speed the engine. Operating the engine at excessive
speed can increase the hazard of personal injury.
21. Disengage drive attachments, stop the engine, re-
move the key, and disconnect the spark plug wire(s)
before: clearing attachment blockages and chutes,
performing service work, striking an object, or if the
unit vibrates abnormally. After striking an object, in-
spect the machine for damage and make repairs be-
fore restarting and operating the equipment.
22. Never place hands near the moving parts, such as a
hydro pump cooling fan, when the tractor is running.
(Hydro pump cooling fans are typically located on top
of the transaxle).
23. Units with hydraulic pumps, hoses, or motors: WARN-
ING: Hydraulic uid escaping under pressure may
have su cient force to penetrate skin and cause
serious injury. If foreign uid is injected into the skin
it must be surgically removed within a few hours by a
doctor familiar with this form of injury or gangrene may
result. Keep body and hands away from pin holes or
nozzles that eject hydraulic uid under high pressure.
Use paper or cardboard, and not hands, to search for
leaks. Make sure all hydraulic uid connections are
tight and all hydraulic hoses and lines are in good con-
dition before applying pressure to the system. If leaks
occur, have the unit serviced immediately by your au-
thorized dealer.
24.
WARNING: Stored energy device. Improper re-
lease of springs can result in serious personal injury.
Springs should be removed by an authorized techni-
cian.
25. Models equipped with an engine radiator: WARNING:
Stored energy device. To prevent serious bodily injury
from hot coolant or steam blow-out, never attempt to
remove the radiator cap while the engine is running.
Stop the engine and wait until it is cool. Even then,
use extreme care when removing the cap.
OPERATOR SAFETY
10
Not for
Reproduction
11
OPERATOR SAFETY
Transmission
Release
Part No. 1723160
1723160
SS
TT
OO
PP
SS
TT
OO
PP
Fuel Level
Part No. 1730172
1730172
Danger, Rotating Blades,
Part No. 1704277
Decal - Operating Instructions (2WD),
Part No. 1726923
Danger, Rotating Blades,
Part No. 1704276
Decal Locations
Decal - Cutting
Height
Part No. 1721197
en
Ignition Switch
Positions
Part No. 1722806
Decal - Operating Instructions (4WD),
Part No. 1734206
Not for
Reproduction
FEATURES AND CONTROLS
12
Tractor Controls Figure 1
Throttle Control
The throttle controls engine speed. Move the throttle for-
ward to increase engine speed and back to decrease en-
gine speed. Always operate at FULL throttle.
Choke
Close the choke for cold starting. Open the choke once the
engine starts. A warm engine may not require choking.
Move the lever forward to close the choke.
Headlights
The light switch turns the tractor headlights on and o .
Reverse Mowing Option (RMO)
The Reverse Mowing Option allows for mowing (or use of
other PTO driven attachments) while traveling in reverse.
If you choose to mow or operate another attachment in
reverse, turn the RMO key after the PTO is engaged. The
L.E.D. light will illuminate, and the operator can then mow
in reverse. Each time the PTO is disengaged the RMO
needs to be reactivated if desired.
Tractor Controls
12V
Not for
Reproduction
FEATURES AND CONTROLS
13
PTO Switch
The PTO (Power Take-O ) switch engages and disen-
gages attachments that use the PTO. To engage the PTO,
pull UP on the switch. Push DOWN to disengage. Note that
the operator must be seated rmly in the tractor seat for the
PTO to function.
Ignition Switch
The ignition switch starts and stops the engine, it has three
positions:
OFF Stops the engine and shuts o the electri-
cal system.
RUN Allows the engine to run and powers the
electrical system.
START Cranks the engine for starting.
NOTE: Never leave the ignition switch in the RUN position
with the engine stopped–this drains the battery.
Brake Pedal
Depressing the brake pedal applies the tractor brake.
Ground Speed Pedals
The tractor’s forward ground speed is controlled by the
forward ground speed control pedal. The tractor’s reverse
ground speed is controlled by the reverse ground speed
control pedal.
Depressing either pedal will increase ground speed. Note
that the further down the pedal is depressed, the faster the
tractor will travel.
Parking Brake
The parking brake knob is used to lock the parking brake
when the tractor is stopped. Fully depressing the brake pedal
and pulling up on the knob engages the parking brake
Mower Height of Cut Adjustment
The cutting height adjustment switch controls the mower
cutting height. The cutting height is in nitely adjustable be-
tween 1.0” and 4.0” (2.5 and 10.2 cm).
Cruise Control
The cruise control is used to lock the ground speed control
in forward. Move the lever forward until the desired ground
speed is reached. To disengage the cruise control move
the lever back. In the event you need to stop quickly, de-
pressing the brake pedal will also return the cruise control
to neutral.
Seat Adjustment Lever
The seat can be adjusted forward and back. Move the
lever, position the seat as desired, and release the lever to
lock the seat into position.
Transmission Release Lever
The transmission release lever deactivates the transmission
so that the tractor can be pushed by hand. See Pushing
the Tractor by Hand.
Transmission Oil Expansion Chamber
Transmission oil is added through the transmission oil ex-
pansion chamber. It also serves as extra holding capacity
for oil as the transmission heats up and the oil expands.
See the Engine Manual for oil level check and ll proce-
dures.
Fuel Tank
To remove the cap, turn counterclockwise. On models with
a dashboard display, the fuel gauge is part of the dash-
board. Models without a dashboard display have a fuel
gauge located under the seat.
12V
12-Volt Power Outlet
The power outlet is 12V-DC. Accessory must be rated at 14
amps or less.
Di erential Lock Pedal
Depressing this pedal locks the transmission di erential,
locking both rear wheels into “drive”.
Use this feature if the tractor is stuck because one wheel
is slipping. Engage the di erential lock at slow ground
speeds only.
Steering Tilt Adjust
Use the tilt knob located on the bellows to release the pivot
mechanism and pivot the wheel to the desired position. Re-
lease the tilt knob to lock in position.
en
Not for
Reproduction
FEATURES AND CONTROLS
14
Parking Brake Function
Applying the Parking Brake - See Figure 2. To lock the
parking brake, release the ground speed pedals (A), fully
depress the brake pedal (B), pull UP on the parking brake
knob (C), and then release brake pedal.
Releasing the Parking Brake - See Figure 2. To release
the parking brake, fully depress the brake pedal (B) and
push the parking brake knob (C) DOWN.
IMPORTANT NOTE: The tractor’s hydraulic attachment lift
will not work when the parking brake is engaged.
12-Volt Power Outlet
The 12-volt accessory plug is located in the left side pod. It
can be used to power small electronic devices. The acces-
sory must be rated at 14 amps or less.
NOTE: Operating a 12-volt accessory, especially with the
engine at idle, may cause battery discharge. When not using
the accessory plug it must be covered with the rubber plug
to prevent moisture from causing a short circuit. Entrance of
water into plug can cause a short circuit.
Attachment Lift Control Lever
When using the mower deck, lift the deck o the ground
while transporting to and from the job site. DO NOT cut with
the mower in the raised, transport position. The attachment
lift control lever raises and lowers attachments that utilize
the tractor’s hydraulic lift cylinder. Pushing the lever forward
lowers the attachment while pulling the lever back raises
the attachment.
IMPORTANT NOTE - The attachment lift will not work
when the parking brake is engaged.
Automatic Controlled Traction
What is Automatic Controlled Traction?
Automatic Controlled Traction (ACT) is an exclusive
feature of our transmissions that provides improved trac-
tion. ACT applies a preset amount of torque to both rear
wheels even if one starts slipping (a transmission without
ACT will lose traction completely if one rear wheel starts
slipping). This preset torque is just enough to provide ad-
ditional traction, and still allow the wheels to turn at di er-
ent speeds in a tight turn without damaging the lawn.
What to Expect from Your ACT Tractor
For the most part, while using your tractor you will not
notice ACT working, and you will simply become accus-
tomed to increased traction an ACT transmission pro-
vides.
Under certain circumstances the ACT system limit can
be exceeded, and one of the rear wheels may slip (for
instance if trying to turn up a hill while accelerating). This
is normal. If you start to lose traction, do not speed up.
Instead, slow to a stop, straighten the steering wheel, and
slowly accelerate. Stopping the tractor allows the trans-
mission to regain more traction.
Not for
Reproduction
FEATURES AND CONTROLS
15
Dashboard Display & Functions
Display Items
Refer to Figure 3.
A. FUEL LEVEL
Indicates the amount of fuel in the fuel tank. Left is empty;
right is full.
B. HOUR METER / CLOCK / SERVICE INDICATOR
Displays the clock, hour meter, and maintenance reminder.
The hour meter measures the number of hours the key
has been in the RUN position. The hour meter will ash
an initial oil change indicator at 5 hours, and a lubrica-
tion reminder every 50 hours. These reminders display
for approximately two hours and will automatically reset
themselves.
NOTE: The hour meter will register the passage of time
when the key is in the RUN position, even if the engine is
not running. The hour meter has a self contained power
source so the total hours are always visible.
C. SELECT BUTTON
Used to set the clock and reset the maintenance reminder.
D. SET BUTTON
Used to set the clock and reset the maintenance reminder.
E. PTO LIGHT
Indicates the PTO switch is in the ON position.
F. CRUISE CONTROL LIGHT
Indicates that the cruise control is engaged.
G. LOW OIL PRESSURE LIGHT
Indicates that the engine oil pressure is low. The light will
turn on when the tractor is rst started and then go out. IF
THIS LIGHT TURNS ON WHILE THE TRACTOR IS IN
USE, TURN THE ENGINE OFF IMMEDIATELY. Contact
your authorized dealer for service.
H. LOW VOLTAGE LIGHT
Indicates that the electrical system voltage is low. The light
will turn on when the tractor is rst started and then go out.
IF THIS LIGHT TURNS ON WHILE THE TRACTOR IS IN
USE, TURN THE ENGINE OFF IMMEDIATELY. Contact
your authorized dealer for service.
Functions
DASHBOARD DISPLAY MODELS
Display Total Running Hours - When the key switch is
rst turned to the RUN position, all warning indicators will
light and the total running hours will be displayed. Be sure
all lights are functioning.
Display PTO Hours - Turn the key OFF, engage the PTO,
and turn the key to RUN (engine o ).
Set the Clock - Start the engine, leave the engine run-
ning. Depress the select button (C, Figure 3) for three (3)
seconds and release. Depress set button and HOLD to
advance time. Depress select button to select minutes.
Depress and HOLD set button (D) to advance time. Leave
alone for 5 seconds and clock will activate. Shut o engine.
Demonstration Mode - With the engine o , hold down the
set button (D) and turn the key switch to RUN.
Maintenance Reminder - A maintenance reminder will
display in the information window (B) after the rst 5 hours
of operation, and then after every 50 hours. The reminder
will automatically reset after 5 hours. The reminder can be
manually reset by turning the key switch from OFF to RUN
(with engine o ) and then depressing the set (D) and select
(C) buttons simultaneously for 5 seconds.
en
Not for
Reproduction
16
OPERATION
Adding Fuel
WARNING
Fuel and its vapors are extremely ammable
and explosive.
Fire or explosion can cause severe burns or
death.
When Adding Fuel
Turn engine o and let engine cool at least 3
minutes before removing the fuel cap.
Fill fuel tank outdoors or in well-ventilated area.
Do not over ll fuel tank. To allow for expansion of
the fuel, do not ll above the bottom of the fuel tank
neck.
Keep fuel away from sparks, open ames, pilot
lights, heat, and other ignition sources.
Check fuel lines, tank, cap, and ttings frequently
for cracks or leaks. Replace if necessary.
If fuel spills, wait until it evaporates before starting
engine.
1. Clean the fuel cap area of dirt and debris. Remove
the fuel cap (A, Figure 4).
2. Fill the fuel tank with fuel. To allow for expansion of the
fuel, do not ll above the bottom of the fuel tank neck.
3. Reinstall the fuel cap.
Starting the Engine
WARNING
Fuel and its vapors are extremely ammable
and explosive.
Fire or explosion can cause severe burns or
death.
When Starting Engine
Ensure that spark plug, mu er, fuel cap and air
cleaner (if equipped) are in place and secured.
Do not crank engine with spark plug removed.
If engine oods, set choke (if equipped) to OPEN/RUN
position, move throttle (if equipped) to FAST position
and crank until engine starts.
WARNING
If the unit does not pass a safety test, do not
operate it. See your authorized dealer.
Safety Interlock System Tests
This unit is equipped with a Safety Interlock System. Do
not attempt to bypass or tamper with the switches and
devices.
Test 1 — Engine should NOT crank if:
• PTO switch is ON, OR
• Brake pedal is NOT fully depressed (parking brake
OFF), OR
• The cruise control lever is NOT in NEUTRAL.
Test 2 — Engine SHOULD crank if:
• PTO switch is OFF, AND
• Brake pedal is fully depressed (parking brake ON),
AND
• The cruise control lever is in NEUTRAL.
Test 3 — Engine should SHUT OFF if:
• Operator rises o seat with PTO engaged, OR
• Operator rises o seat with brake pedal NOT fully de-
pressed (parking brake OFF).
Test 4 — Check Mower Blade Stopping Time
Mower blades and mower drive belt should come to a
complete stop within ve seconds after electric PTO
switch is turned OFF. If mower drive belt does not stop
within ve seconds, see an authorized dealer.
Test 5 — Reverse Mow Option (RMO) Check
• Engine should shut o if reverse travel is attempted
if the PTO has been switched on and RMO has not
been activated.
• RMO light should illuminate when RMO has been ac-
tivated.
NOTE: Once the engine has stopped, the PTO switch
must be turned off after the operator returns to the seat
in order to start the engine.
Not for
Reproduction
OPERATION
WARNING
Engines give off carbon monoxide, an
odorless, colorless, poison gas.
Breathing carbon monoxide can cause
nausea, fainting or death.
Start and run engine outdoors.
Do not start or run engine in enclosed area, even if
doors or windows are open.
Driving the Tractor
1. Sit in the seat and adjust the seat so that you can com-
fortably reach all the controls and see the dashboard
display.
2. Engage the parking brake.
3. Make sure the PTO switch is disengaged.
4. Start the engine (see Starting the Engine).
5. Disengage the parking brake and release the brake
pedal.
WARNING
Mowing in reverse can be hazardous to bystanders.
Tragic accidents can occur if the operator is not
alert to the presence of children. Never activate
RMO if children are present. Children are often
attracted to the unit and the mowing activity.
WARNING
The engine will shut off if the reverse ground speed
pedal is depressed while the PTO is on and the
RMO has not been activated. The operator should
always turn the PTO off prior to driving across
on roads, paths or any area that maybe used by
other vehicles. Sudden loss of drive could create a
hazard.
6. Depress the forward ground speed control pedal to
travel forward. Release the pedal to stop. Note that the
further down the pedal is depressed the faster the trac-
tor will travel.
7. Stop the tractor by releasing the ground speed control
pedals, setting the parking brake, and stopping the en-
gine (see Stopping the Tractor and Engine).
NOTICE: This engine was shipped from Briggs & Stratton
without oil. Before you start the engine, make sure you
add oil according to the instructions in this manual. If you
start the engine without oil, it will be damaged beyond
repair and will not be covered under warranty.
Mowing
1. Set the mower cutting height to the desired level and
set the gauge wheels to the appropriate position (if
equipped).
2. Engage the parking brake. Make sure the PTO switch is
disengaged.
3. Start the engine (see Starting the Engine).
4. Set the throttle to FULL.
5. Engage the PTO (Mower Deck).
6. Begin mowing.
7. When nished, shut o the PTO and raise the mower
using the attachment lift control lever.
8. Stop the engine (see Stopping the Tractor and
Engine).
17
1. While sitting in the operator’s seat, fully depress the
brake pedal or set the parking brake.
2. Make sure that your feet are not depressing the
ground speed control pedals and that the cruise con-
trol lever is in NEUTRAL.
3. Disengage the PTO clutch.
4. Set the throttle to FULL.
5. Close the choke.
NOTE: A warm engine may not require choking.
6. Insert the ignition key and turn it to START.
7. After the engine starts, move the engine throttle con-
trol to SLOW. Warm up the engine by running it for at
least a minute.
8. Set throttle to FULL.
NOTE: In the event of an emergency the engine can be
stopped by simply turning the ignition switch to STOP.
Use this method only in emergency situations. For nor-
mal engine shut down follow the procedure given in
Stopping the Tractor and Engine.
en
Not for
Reproduction
OPERATION
Pushing the Tractor by Hand
1. Disengage the PTO and turn the engine o .
2. Push the lever approximately 2-3/8” (6 cm) to release
the transmission (B, Figure 5).
3. The tractor can now be pushed by hand.
DO NOT TOW TRACTOR
Towing the unit will cause transmission dam-
age.
Do not use another vehicle to push or pull
this unit.
Do not actuate the transmission release
valve lever while the engine is running.
Attaching a Trailer
The maximum horizontal drawbar force allowed is 444
Newton. The maximum vertical drawbar force is 222
Newton. This equates to a 396 lbs (180 kg) trailer on a 10
degree hill. Secure the trailer with an appropriately sized
clevis pin (A, Figure 7) and clip (B).
Adjusting Mower Cutting Height
The height-of-cut switch (A, Figure 6) adjusts the mower
cutting height. Press the switch UP to raise the mower cut-
ting height and DOWN to lower the mower cutting height.
The cutting height is in nitely adjustable between 1.0” and
4.0” (2,5 and 10,2 cm).
Stopping the Tractor and Engine
1. Return the ground speed control(s) to NEUTRAL.
2. Disengage the PTO and wait for all moving parts to
stop.
3. Set the throttle to FULL.
4. Turn the ignition switch to OFF. Remove the key.
WARNING
Fuel and its vapors are extremely
ammable and explosive.
Fire or explosion can cause severe burns or
death.
Do not choke the carburetor to stop engine.
Mowing in Reverse (RMO)
If an operator chooses to mow in reverse, the RMO system
can be used. To use the Reverse Mowing Option (RMO)
turn the RMO key after the PTO is engaged. The L.E.D.
light will illuminate, and the operator can then mow in re-
verse. Each time the PTO is engaged the RMO needs to
be reactivated if desired. The key should be removed to
restrict access to the RMO feature.
Attachment Operation in Reverse
If an operator chooses to operate a PTO driven attach-
ment in reverse, the RMO system can be used. To use the
Reverse Mowing Option (RMO) turn the RMO key after the
PTO is engaged. The L.E.D. light will illuminate, and the
operator can then operate the attachment in reverse. Each
time the PTO is disengaged the RMO needs to be reacti-
vated if desired. The key should be removed to restrict ac-
cess to the RMO feature.
Attachment Lift Control
The attachment lift control lever (B, Figure 6) raises and
lowers attachments that utilize the tractor’s hydraulic lift
cylinder. Pushing the lever forward lowers the attachment
while pulling the lever back raises the attachment.
18
Not for
Reproduction
MAINTENANCE
Check Tire Pressure
Tire pressure should be checked periodically, and maintained
at the levels shown in the chart. Note that these pressures may
di er slightly from the “Max In ation” stamped on the side-wall
of the tires. The pressures shown provide proper traction, im-
prove cut quality, and extend tire life.
Size PSI bar
16 x 6.5-8 12-15 0,68-0,82 bar
24 x 12.0-12 6-8 0,41-0,55 bar
Maintenance Chart
TRACTOR AND MOWER
Every 8 Hours or Daily
Check safety interlock system
Clean debris o tractor and mower deck
Clean debris from engine compartment
Every 25 Hours or Annually *
Check mower blade stopping time
Check tractor and mower for loose hardware
Check tire pressure
Every 50 Hours or Annually *
Check tractor brakes
Clean battery and cables
See Dealer Annually to
Lubricate tractor and mower
Check mower blades **
* Whichever comes rst
** Check blades more often in regions with sandy soils or
high dust conditions.
ENGINE
First 5 Hours
Change engine oil - see engine manual
Every 8 Hours or Daily
Check engine oil level - see engine manual
Every 25 Hours or Annually *
Clean engine air lter and pre-cleaner **
Every 50 Hours or Annually *
Change engine oil
Replace oil lter
Annually
Replace air lter
Replace pre-cleaner
See Dealer Annually to
Inspect mu er and spark arrester
Replace spark plug
Replace fuel lter
Clean engine air cooling system
* Whichever comes rst
** Clean more often in dusty conditions or when airborne
debris is present.
19
Check/Clean Oil Cooler
The engine oil cooler is located on the side of the engine
(A, Figure 8) and should be cleaned with compressed air at
regular intervals or if dirty.
en
Emissions Control
Maintenance, replacement, or repair of the emissions control
devices and systems may be performed by any non-road en-
gine repair establishment or individual. However, to obtain “no
charge” emissions control service, the work must be performed
by a factory authorized dealer. See the Emissions Warranty.
Not for
Reproduction
MAINTENANCE
Cleaning the Battery and Cables
1. Disconnect the cables from the battery, negative cable
rst (A, Figure 9).
2. Remove the battery hold-down strap (B) and battery.
3. Clean the battery compartment with a solution of baking
soda and water.
4. Clean the battery terminals and cable ends with a wire
brush and battery terminal cleaner until shiny.
5. Reinstall the battery in the battery compartment, and
secure with the battery hold-down strap.
6. Reattach the battery cables, positive cable rst (C).
7. Coat the cable ends and battery terminals with petro-
leum jelly or non-conducting grease.
WARNING
When removing or installing battery cables,
disconnect the negative cable FIRST and
reconnect it LAST. If not done in this order,
the positive terminal can be shorted to the
frame by a tool.
Battery Maintenance
Battery Charging
WARNING
Keep open ames and sparks away from
the battery; the gasses coming from it are
highly explosive. Ventilate the battery well
during charging.
A dead battery or one too weak to start the engine may be
the result of a defect in the charging system or other electri-
cal component. If there is any doubt about the cause of the
problem, see your dealer. If you need to replace the battery,
see the Cleaning the Battery and Cables section.
To charge the battery, follow the instructions provided by
the battery charger manufacturer as well as all warnings
included in the Operator Safety section of this manual.
Charge the battery until fully charged. Do not charge at a
rate higher than 10 amps.
Seat Adjustment
The seat can be adjusted forward and back. Move the lever
(A, Figure 10), position the seat as desired, and release the
lever to lock the seat into position.
20
Steering Wheel Adjustment
1. Use a suitable punch to remove the roll pin (A, Figure
11) at the base of the steering wheel (B).
2. Pull down on the rubber boot to expose the two holes in
the steering shaft (C).
3. Align the hole in the steering wheel with the appropriate
steering shaft hole and install the roll pin.
NOTE: Steering wheel is factory installed with the roll pin
in the bottom hole.
Check Mower Blade Stopping Time
Mower blades and mower drive belt should come to a com-
plete stop within ve seconds after the electric PTO switch
is turned o .
1. With tractor in neutral, PTO disengaged and operator in
seat, start the engine.
2. Look over the left-hand footrest at the mower drive belt.
Engage the PTO and wait several seconds. Disengage
the PTO and check the amount of time it takes for the
mower drive belt to stop.
3. If mower drive belt does not stop within ve seconds,
see an authorized dealer.
Not for
Reproduction
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Simplicity SIMPLICITY PRESTIGE 27HP TRACTORS AND MOWER DECKS User manual

Category
Lawnmowers
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI