2. Barco
  3. 2 kW Xenon lamp SIM 10

Barco 2 kW Xenon lamp SIM 10 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Barco 2 kW Xenon lamp SIM 10 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SIM 10 Lamp kit Quick Installation Guide
Manual number:
R59770719_00
Date:
28 November 2011
Kit numbers:
R9843087 / R9843097
Used for:
SIM 10
CAUTION: Lamps may not be disposed as normal houshold
trash. Contact your local waste disposal facility for informa-
tion on the recycling program for HID (High Intensity
Discharge) lamps in your area.
WARNING: This procedure may only be performed by Barco
trained or qualified technicians!
WARNING: LAMP RUNTIME. Do not exceed the indicated maxi-
mum total lifetime of the lamp in normal power mode.
WARNING: RISK OF ELECTRICAL SHOCK. Power down the projec-
tor, respect the cool-down cycle and unplug the power cord
before starting this procedure.
WARNING: Do not use any other lamps than the original Barco
lamps.
WARNING: UV RADIATION EXPOSURE. Never light the lamp if the
projector covers are removed.
WARNING: Never touch the front glass cover with bare fingers.
TIPS:
- See www.barco.com for the
latest version of this Quick
Installation Guide;
- For detailed information,
consult Installation Manual
R5977691 on www.barco.
com.
WARNING: HOT SURFACE. The lamp temperature raises to very
high level during operation. Wait for 15 more minutes after
switching of the projector before starting this procedure.
WARNING: RISK OF EXPLOSION. This lamp operates at high pres-
sure and can explode if not handled correctly.
90°
90°
1
2
3
Page 1
Barco nv
Noordlaan 5, B-8520 Kuurne
www.barco.com
SIM 10 Lamp kit Quick Installation Guide
4 5
6
7
Page 2
/