Part #1156
Rev.- A - CP/mc
Page 1
©2012 Edelbrock LLC
Brochure #63-1156
EDELBROCK 94 CARBURETOR-CHOKE CABLE BRACKET
Part #1156
INSTALLATION INSTRUCTIONS
®
DESCRIPTION: This choke bracket kit provides users with a means of securing the cable housing of a manual choke cable in place so that the
choke cable may open and close the choke butterfly on the carburetor. This bracket is a replica of the original Ford bracket that mounted to the
carburetor, It includes all the neccessary hardware needed to mount the bracket to an Edelbrock 94, or similar carburetors.
INSTALLA
TION:
1. Remove carburetor bowl bolt labeled “A” , install the new bracket over the flange and replace the original bolt.
2. Loosen the cable retaining screw (“B”) on the bracket, feed the choke cable through, then tighten the screw so that the cable
housing is snugly secured.
3. Loosen the cable stop bolt (“C”) on the pivot, feed the cable through - ensuring that the cable knob and choke butterfly are in the
closed position - then tighten the cable stop.
A
B
C
Edelbrock LLC • 2700 California St. • Torrance, CA 90503
Tech-Line: 1-800-416-8628 • Office Line: 310-781-2222
®
PLEASE study these instructions carefully before beginning this installation. Most installations can be accomplished with common tools and
procedures. However, you should be familiar with and comfortable working on your vehicle. If you do not feel comfortable performing this installation,
it is recommended to have the installation completed by a qualified mechanic. If you have any questions, please call our Technical Hotline at:
1-800-416-8628, 7:00 am - 5:00 pm, Pacific Standard Time, Monday through Friday.
KIT CONTENTS:
1 - Choke Cable Bracket
1 - Choke Bracket Clamp
1 - Square Nut
1 - Bolt
-
1
Edelbrock Choke Cable Bracket for Edelbrock 94 Series Carburetor Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Edelbrock 1806 User manual
-
Edelbrock Marine Carb #1410 750 CFM With Electric Choke, Zinc-Dichromate Finish (Non-EGR) Installation guide
-
Edelbrock Performer 1412 Installation guide
-
-
-
Edelbrock RPM Air-Gap Dual-Quad Small Block Ford Intake Manifold Installation guide
-
-
-
-