OWNER’S MANUAL
June 1994 FORM: OM-675B
Use above FORM number when ordering extra manuals.
Running Gear/Cylinder Rack (042 454 Or 154 916)
5
WARNING
ELECTRIC SHOCK can kill.
• Do not touch live electrical parts.
• Turn Off welding power source and input disconnect
device.
• Disconnect input plug or power conductors from
deenergized supply BEFORE moving welding
power source.
CYLINDERS can explode if damaged.
• Keep cylinders away from welding and other
electrical circuits.
• Never touch cylinder with welding electrode.
• Always secure cylinder to running gear, wall, or
other stationary support.
FALLING EQUIPMENT can cause injury
and damage, OVERSIZED CYLINDER
can cause tipping.
• Move unit with proper handcart.
• If using a fork lift vehicle, secure unit on a skid.
• Never lift unit with cylinder attached.
• Maximum cylinder weight is 20 lb (9 kg).
ST-123 906-G / ST-800 150
To mount the Millermatic 130, insert
brackets (20) through the two middle
slotted holes of the tray (2).
To mount the Spectrum 187, insert
brackets (20) through the four corner
slotted holes of the tray (2).
Running gear/cylinder rack number fol-
lows description in parts list.
Remove paint from axle grooves (11) be-
fore installing retaining rings (12)
Tools Needed:
1/4, 3/8, 7/16, 1/2 in
Description (Qty)
Part
No.
Item
No.
1 108 940 Screw, 1/4-20 x 3/4 (11)
2 132 685 Tray (1)
3 602 207 Washer, 1/4 lock (15)
4 601 865 Nut, 1/4-20 (15)
5 132 688 Holder Strip (1)
6 134 359 Mounting Bracket (2)
7 604 804 Screw, No. 8 x 3/8 (2)
8 138 189 Support Bracket (1)
137 653
.
Caution Label (1)
9 095 094 Wheel, 6 in (2)
10 602 246 Washer, 1/2 flat (2)
11 109 662 Axle (1)
12 081 960
.
Retaining Ring (2)
13 109 670 U-Bolt, 1/4-20 x 9/16 (2)
14 109 664 Base Pan (1)
15 109 318 Caster, 2-1/2 in (2)
16 602 211 Washer, 5/16 lock (2)
17 604 537 Nut, 5/16-18 (2)
18 132 683 Mounting Bracket (2)
19 132 689 Mounting Bracket (4)
20 132 686 Tray Pan, No. 042 454 (1)
20 156 327 Bracket, No. 154 916 (1)
Be sure to provide Model when ordering
replacement parts.
5
1
3
4
6
4
3
1
2
20
1
20
15
16
17
1
4
3
14
13
9
10
12
11
4
3
8
7
6
4
18
3
19
1
20
No. 154 916 No. 042 454
Figure 1. Installing Running Gear/Cylinder Rack (No. 042 454 Illustrated)
-
1
Miller KD000000 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Miller RUNNING GEAR/CYLINDER RACK 042454 Owner's manual
-
Miller RUNNING GEAR THREE-PHASE 042886 Owner's manual
-
-
-
-
-
-
-
-
