John Lewis JLBIIH617 Quick start guide

John Lewis
Brand
John Lewis
Model
JLBIIH617
Category
Hobs
Type
Quick start guide
Quick User’s Guide
Control Panel
1 2 4 53 6 7
11 9810
1. ON / OFF To activate and deactivate the hob.
2.
Lock / The Child Safety Device To lock / unlock the control panel.
3.
SenseBoil®
To activate and deactivate the function. The indicators above the symbol
show the progress of the function.
4.
Pause To activate and deactivate the function.
5. Heat setting display To show the heat setting.
6. Timer indicators of cooking zones To show for which zone you set the time.
7. Timer display To show the time in minutes.
8.
To select the cooking zone.
9.
To increase or decrease the time.
10.
PowerBoost To activate the function.
11. Control bar To set a heat setting.
Let’s help you get started. Use the following instructions to discover
the various features of your appliance.
Warning: Do not let the appliance stay unattended
during operation.
Use the sensor elds to operate the appliance. The
displays, indicators and sounds tell which functions
operate.
SenseBoil®
SenseBoil®
The function automatically adjusts the temperature of
water so that it does not boil over once it reaches the
boiling point.
If there is any residual heat ( ) on
the cooking zone you want to use, an acoustic
signal is emitted and the function does not start.
To activate the function:
1. Touch to activate the hob.
2. Touch
to activate the function.
A blinking appears for cooking zones on which
you can presently use the function.
3. Touch the control bar of any available cooking zone
(between the heat setting 1-9) for which you want to
start the function.
The function starts.
If you do not choose any cooking zone within 5
seconds the function does not activate.
Once the function starts the indicators above
the symbol come on one after another
until the water reaches the boiling point.
When the function detects the boiling point the hob
emits an acoustic signal and the heat level automatically
changes to 5.
If all cooking zones are already in use or there
is some residual heat on all of them, the hob
emits a beep sound, the indicators above
blink and the function does not start.
Activating and deactivating the SenseBoil®
function.
To deactivate the function:
• touch (the function deactivates and the heat
setting goes down to 0);
• or touch the control bar and adjust the heat setting
manually.
The Pause function and lifting of the pot
deactivate the SenseBoil® function.
Hints & Tips
For induction cooking zones a strong
electromagnetic eld creates the heat in the
cookware very quickly.
Cookware for induction cooking
zones
Use the induction cooking zones with correct
cookware.
Cookware material
Cast iron*, steel, enamelled steel, stainless
steel, the bottom made of multi-layer
(with correct mark from a manufacturer).
Aluminium, copper, brass, glass, ceramic,
porcelain.
Cookware is correct for an
induction hob if:
• some water boils very quickly on a zone set to the
highest heat setting.
• a magnet pulls on to the bottom of the cookware.
The bottom of the cookware must be as thick
and at as possible.
* SenseBoil® may not work properly with cast iron
cookware.
Hints & Tips for SenseBoil®
The function works best for boiling water and
preparing potatoes. It does not work with
nonstick cookware, e.g. with a ceramic coating.
It might not work with cast iron cookware.
Enamelled steel pots are recommended for
achieving the best results while boiling
potatoes. Other pot types as well as cut,
peeled or different-sized potatoes may
inuence the results.
Make sure the surface of the hob is dry. Use
only pots with a dry and clean bottom.
Check if the pot you chose is suitable for SenseBoil®
by monitoring the rst cooking session.
To use SenseBoil® efciently follow the advice below:
• Fill between half to three quarters of the pot with
cold tap water leaving 4 cm from the rim of the pot
empty. Do not use less than 1 or more than 5 litres
of water. Make sure the total weight of the water (or
the water and potatoes) ranges between 1-5 kg.
• If you want to cook potatoes, make sure they are
completely covered with water, but remember to
leave at least one quarter of the pot empty.
• To achieve the best results
cook only whole, unpeeled,
medium-sized potatoes.
• Avoid producing external
vibrations (e.g. from using
a blender or placing a
mobile phone next to the
appliance) when the function
is running.
• If you want to use salt, add it after the water reaches
the boiling point.
• The function may not work properly for water
kettles and espresso pots.
Energy saving
You can save energy during everyday cooking if
you follow below hints.
• When you heat up water, use only the amount you
need.
• If it is possible, always put the lids on the cookware.
• Before you activate the cooking zone put the
cookware on it.
• Put the smaller cookware on the smaller cooking
zones.
• Put the cookware directly in the centre of the
cooking zone.
• Use the residual heat to keep the food warm or to
melt it.
max. 5l / 5kg / 75%
min. 1l / 1kg / 50%
Troubleshooting
Problem Possible cause Solution
You hear a beep sound, the
indicators above blink and
the SenseBoil® function does
not start.
None of the cooking zones is ready to be
used with the SenseBoil® function. There
is some residual heat on the cooking zones
you want to choose or they are still in use.
Finish your previous cooking activities and
choose a free cooking zone without any
residual heat.
F There is no cookware on the
cooking zone you want to start
using or the pot is unsuitable.
Put a pot on the cooking zone. Make sure you
use a pot of the right type and size.
F1 The power is too low due to unsuitable
cookware or an empty pot.
Use the right kind of cookware. You can nd
the exact measurements of the pots suitable
for your appliance in the “Technical data”
chapter of the User Manual. For the right
kinds of cookware check out the hints and
tips.
Do not activate any zone with an empty pot
on it.
F2 The pot is empty or contains some liquid
other than water.
Avoid using the function with liquids other
than water.
F3 There is too much or too little water in
the pot.
You boiled some food other than water
and potatoes.
The boiling point was moved in time and
the SenseBoil® function could not work
properly.
Make sure you ll between half to three
quarters of the pot with cold tap water. Do
not use less than 1 or more than 5 litres of
water. Only boil water and potatoes with the
use of SenseBoil®.
Quickly nd the solution to keep cooking with ease.
867350847-A-182019
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

John Lewis JLBIIH617 Quick start guide

John Lewis
Brand
John Lewis
Model
JLBIIH617
Category
Hobs
Type
Quick start guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents