Bartscher 110804 Operating instructions

Brand: Bartscher

Model: 110804

Type: Operating instructions

Gebrauchsanleitung

Kühltische

Seiten 1 bis 24

Instruction manual

Refrigerated counters

pages 25 to 48

Mode d’emploi

Tables réfrigérées

de pages 49 à 72

Instrucciones de servicio

Mesas refrigeradas

la páginas 73 a la 96

Manual de instruções

Mesas refrigeradas

páginas desde 97 até 120

Gebruiksaanwijzing

Koelwerkbank

blz. 121 t/m 144

Instrukcja obsługi

Stoły chłodnicze

strony od 145 do 168

D/A/CH

GB/UK

F/B/CH

NL/B

Original-Gebrauchsanleitung

V3/1117

Übersicht Kühltische

Overview refrigerated counters

Tables réfrigérées - aperçu

Mesa con refrigeración - sumario

Mesa com refrigeração - sumário

Koelwerkbank - overzicht

Stoły chłodnicze - zestawienie

110801 / T2

110801MA / T2 MA

110802 / S2T1-150

110802MA / S2T1-150 MA

110803 / ST-150

110803MA / ST-150 MA

110804 / S6-100

110804MA / S6-100 MA

110805 / S2T2-150

110805MA / S2T2-150 MA

110806 / S4T1-150

110806MA / S4T1-150 MA

110807 / S6-150

110807MA / S6-150 MA

110808 / S9-100

110808MA / S9-100 MA

110814MA / T3 MA

- 25 -

ENGLISH

Table of contents

1.Safety ........................................................................................................................ 26

1.1 Key to symbols ..................................................................................................... 26

1.2 Safety instructions ................................................................................................ 27

1.3 Proper use ............................................................................................................ 31

2. General information ................................................................................................ 32

2.1 Liability and Warrantees ....................................................................................... 32

2.2 Copyright protection ............................................................................................. 32

2.3 Declaration of conformity ...................................................................................... 32

3. Transport, packaging and storage......................................................................... 33

3.1 Delivery check ...................................................................................................... 33

3.2 Packaging ............................................................................................................. 33

3.3 Storage ................................................................................................................. 33

4. Technical data ......................................................................................................... 34

4.1 Overview of parts ................................................................................................. 34

4.2 Technical specification ......................................................................................... 35

5. Installation and operation ....................................................................................... 39

5.1 Positioning and connection ................................................................................... 39

5.2 Operation .............................................................................................................. 40

6. Cleaning and maintenance ..................................................................................... 44

7. Possible Malfunctions ............................................................................................ 46

8. Waste disposal ........................................................................................................ 48

Bartscher GmbH phone: +49 5258 971-0

Franz-Kleine-Str. 28 fax: +49 5258 971-120

33154 Salzkotten Service-Hotline: +49 5258 971-197

Germany www.bartscher.com

GB/UK

- 26 -

Read these instructions before using and keep

them available at all times!

This instruction manual contains information about the installation, operation and

maintenance of the device and should be consulted as an important source of

information and reference guide.

Awareness of the safety instructions and instructions for use in this manual will ensure

the safe and correct use of the device.

In addition to the information given here, you should comply with any local Health and

safety Controls and generally applicable safety regulations.

The instruction manual forms part of the product and should be kept near the device

and easily accessible for anyone carrying out the installation, servicing, maintenance or

cleaning. Please keep these instructions and give them to future owners of the device.

1.Safety

This device is designed in accordance with the presently applicable technological

standards. However, the device can pose a danger if handled improperly and

inappropriately.

All persons using the device must follow the recommendations and instructions in this

manual.

1.1 Key to symbols

In this manual, symbols are used to highlight important safety instructions and any

advice relating to the device. The instructions should be followed very carefully to avoid

any risk of accident, personal injury or material damage.

WARNING!

This symbol highlights hazards which could lead to injury.

WARNING!

This symbol highlights dangerous situations which could lead to injury or death.

- 27 -

HOT SURFACE!

This symbol is a warning that the device surface is hot when in use.

Ignoring this warning may result in burns!

FIRE HAZARD / FLAMMABLE MATERIALS HAZARD / EXPLOSION

HAZARD!

This symbol highlights potentially dangerous situations which could lead to

injury or death.

CAUTION!

This symbol highlights dangerous situations which could lead to light injuries,

or damage, malfunction, and/or destruction of the device.

NOTE!

This symbol highlights recommendations and information aimed for effective

and trouble-free device operation.

1.2 Safety instructions

 The device is not intended for use by individuals (including

children) with physical or mental disabilities, insufficient

experience, and/or insufficient knowledge unless such persons

are under the care of a person responsible for their safety or

have received instructions regarding appropriate use of the

device.

 Children should be observed to ensure that they are not playing

with or starting the device.

 The device is for indoor use only.

 The device must be operated in correct and safe technical

condition only. In case of operational problems disconnect the

device from the power supply (pull the plug from the socket)

and contact the service company.

- 28 -

 Prevent access of children to the package materials like plastic

bags and foamed polystyrene elements. Suffocation hazard!

 Only a qualified technician and using original spare parts and

accessories should carry out repairs and maintenance of the

device. Do not attempt to repair the device yourself.

 Do not use any accessory or spare parts that have not been

recommended by the manufacturer. These can be dangerous

for the user or lead to damages of the device or personal injury,

and further, the warranty expires.

 To prevent hazards and to ensure optimum efficiency, no

modifications or alterations to the device that are not explicitly

approved by the manufacturer may be undertaken.

DANGER! Electric shock hazard!

To avoid the hazard results please follow the safety instructions

below.

 Never allow the power cable to come into contact with heat

sources or sharp edges. The power cable should not hang over

the side of the working surface. Ensure that no one can step on

or trip over the cable.

 The power cable must not be folded, bent or tangled, and must

always remain fully unrolled. Never place the device or other

objects on the power cable.

 Do not cover the cable. Keep away the cable from operating

range and do not immerse it into water.

- 29 -

 Check the power cord regularly for damage. Do not use the

device if the power cord is damaged. If this cable is damaged, it

must be replaced by customer service or a qualified electrician in

order to avoid dangers.

 The supply cable must be disconnected from the socket

only by pulling the plug.

 Never carry or lift the device by the supply cable.

 In any case do not open the device housing. In case of

electrical or mechanical modifications the electric shock

hazard will occur.

 Do not use any acid agents and make sure no water ingresses

the device.

 Never operate the device with moist hands or standing on wet

floor.

 Remove the plug from its socket:

- when the device is not used,

- in case of anomalies during operation,

- before cleaning.

HOT SURFACE! Danger of burns!

To avoid the hazard please follow the safety instructions below:

 During normal operation the compressor surface may be hot.

Do not touch it with bare hands.

- 30 -

FIRE HAZARD / FLAMMABLE MATERIALS HAZARD /

EXPLOSION HAZARD!

Incorrect operation of the device may cause fire or explosion hazard

due to ignition of its content.

To avoid the hazard please follow the safety instructions below:

 Do not store the flammable or explosive substances in the

device, like ether, kerosene, or glues.

 Do not use any electric devices in the device.

 Never use any flammable liquids for cleaning the device or its

parts. Gases releasing during above activities may cause fire

or explosion hazard.

 Do not store or use petrol or other flammable liquids and

gases in the vicinity of this or any other device. Those gases

may cause fire or explosion hazard.

 Do not put any explosive materials, like sprays filled with

flammable propellants, into the device.

 The cooling system in the device may be damaged.

- 31 -

1.3 Proper use

CAUTION!

The device has been designed and constructed only for commercial use

and should be operated by qualified personnel of restaurants, cafeterias,

bars and similar facilities.

The operational safety of the device is assured only in case of proper use, according to

the operation manual.

All technical activities like installation and maintenance must be performed by the

qualified service personnel only.

The refrigerated counter is intended only for cooling appropriate food products.

Do not use the refrigerated counter for:

- storing flammable or explosive materials such as ether, alcohol, oil or glue;

- storing pharmaceutical products or blood.

CAUTION!

Any use going beyond the intended purpose and/or any different use of the

device is forbidden and is not considered as conventional.

Any claims against the manufacturer or his authorized representative as a

consequence of experiencing damages resulting from unconventional use

are impossible.

The operator is liable for all damages resulting from inappropriate use.

- 32 -

2. General information

2.1 Liability and Warrantees

All the information and instructions in this manual take into account standard safety

regulations, current levels of technical engineering as well as the expertise and

experience we have developed over the years.

The instruction manual was translated with all due care and attention. However, we do

not accept liability for any translation errors. The German version of this instruction

manual is definitive.

If the delivery consists of a special model, the actual scope of delivery may differ from

the descriptions and illustrations in this manual. This is also the case for special orders

or when the device has been modified in line with new technology.

CAUTION!

Read this manual carefully and thoroughly before any operation

of the device, and especially before turning it on!

Manufacturer is not liable for any damages or faults caused by:

- violation of advice concerning operation and cleaning;

- use other than designed;

- alterations made by user;

- use of inadequate spare parts.

We reserve the right to make technical changes for purposes of developing and improving

the useful properties.

2.2 Copyright protection

The instruction manual including any texts, drawings, images or other illustrations is

form or by any means without permission in writing from the manufacturer. Any person

who commits any unauthorized act in relation to this publication shall be liable to claims

NOTE!

The contents, texts, drawings, pictures and any other illustrations are

using this publication is liable to criminal prosecution.

2.3 Declaration of conformity

The device complies with the current standards and directives of the EU.

We certify this in the EC declaration of conformity. If required we will be

glad to send you the according declaration of conformity.

- 33 -

3. Transport, packaging and storage

3.1 Delivery check

Please check the delivery upon completeness and transport damage immediately

after receipt. In case of visible damage do not accept or accept the delivery with

reservation only.

Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.

Hidden damages should be reclaimed immediately after notice, as claims for damages

can only be asserted within the effective period for complaints.

3.2 Packaging

Please do not throw away the covering carton of your device as it might be useful for

storage purposes, when moving or, in case of damages, when the device must be sent

back to a repair center. The outer and inner packing material should be removed

completely from the device before installation.

If you liked to dispose the packing, consider the regulations applicable

in your country. Supply re-usable packing materials to the recycling.

Please inspect the device upon completeness. In case any part is missing please

contact our customer service center immediately.

3.3 Storage

Keep the package closed until installation and under consideration of the outside

indicated positioning- and storage markings.

Packages should be stored under consideration of the following:

- do not store outdoors,

- keep it dry and dust-free,

- do not expose it to aggressive media,

- do not expose it to direct sunlight,

- avoid mechanical shocks and vibration,

- in case of longer storage (> 3 months) make sure you check the state

of the packaging and the parts regularly, if required refresh or renew.

- 34 -

4. Technical data

4.1 Overview of parts

Housing

Worktop

Ventilation slots

ON/OFF switch with integrated lamp

Digital temperature controller

Doors

Drawer

Height-adjustable feet

- 35 -

4.2 Technical specification

Design

 Material: stainless steel

 Material worktop: stainless steel

 Ventilated cooling

 Thermostat

 Cooling medium: R134a

 CFC-free

 Drip water evaporation

 Height-adjustable feet

 Height-adjustable: 850 x 900 mm

 Digital display

 Control: electronic, button

 ON/OFF switch

 Indicator light: On/Off

Description

Refrigerated counters

Code-No.:

110801

110802

110803

Model:

S2T1-150

S4-150

Realization:

2 x doors, cooling

1 x doors,

2 drawers

GN 1/1, 150 mm,

cooling

4 drawers

GN 1/1,

3 x 150 mm,

1 x 100 mm,

cooling

Power:

350 W / 230 V 50 Hz

Temperature range:

0 °C - 10 °C

Temperature control:

electronic in 0.1°C steps

Dimensions:

W 1342 x D 700 x H 850 mm

Weight:

88.0 kg

99.5 kg

110.5 kg

- 36 -

Name

Refrigerated coolers

Code-No.:

110801MA

110802MA

110803MA

Model:

T2 MA

S2T1-150 MA

S4-150 MA

Realization:

2 x doors,

cooling

1 x doors,

2 drawers

GN 1/1, 150 mm,

cooling

4 drawers

GN 1/1,

3 x 150 mm,

1 x 100 mm,

cooling

Power:

350 W / 230 V 50 Hz

Temperature range:

0 °C - 10 °C

Temperature control:

electronic in 0.1°C steps

Dimensions:

W 1342 x D 700 x H 900 mm

Weight:

89.0 kg

100.5 kg

111.5 kg

MA – refrigerated counters with backsplash

Description

Refrigerated counters

Code-No.:

110804

110805

110806

Model:

S6-100

S2T2-150

S4T1-150

Realization:

6 drawers

GN 1/1, 100 mm,

cooling

2 x doors,

2 drawers

GN 1/1, 150 mm,

cooling

1 x doors,

4 drawers

GN 1/1, 150 mm,

cooling

Power:

350 W / 230 V 50 Hz

452 W / 230 V 50 Hz

Temperature range:

0 °C - 10 °C

Temperature control:

electronic in 0.1°C steps

Dimensions:

W 1342 x D 700 x

H 850 mm

W 1792 x D 700 x H 850 mm

Weight:

131.0 kg

122.2 kg

133.8 kg

- 37 -

Name

Refrigerated counters

Code-No.:

110804MA

110805MA

110806MA

Model:

S6-100 MA

S2T2-150 MA

S4T1-150 MA

Realization:

6 drawers

GN 1/1, 100 mm,

cooling

2 x doors,

2 drawers

GN 1/1, 150 mm,

cooling

1 x doors,

4 drawers

GN 1/1, 150 mm,

cooling

Power:

350 W / 230 V 50 Hz

452 W / 230 V 50 Hz

Temperature range:

0 °C - 10 °C

Temperature control:

electronic in 0.1°C steps

Dimensions:

W 1342 x D 700 x

H 900 mm

W 1792 x D 700 x H 900 mm

Weight:

132.0 kg

123.2 kg

134.8 kg

MA – refrigerated counters with backsplash

Description

Refrigerated counters

Code-No.:

110807

110808

Model:

S6-150

S9-100

Realization:

6 drawers, GN 1/1,

5 x 150 mm, 1 x 100 mm,

cooling

9 drawers, GN 1/1,

100 mm

cooling

Power:

452 W / 230 V 50 Hz

Temperature range:

0 °C - 10 °C

Temperature control:

electronic in 0.1°C steps

Dimensions:

W 1792 x D 700 x H 850 mm

Weight:

144.2 kg

171.0 kg

- 38 -

Name

Refrigerated counters

Code-No.:

110807MA

110808MA

110814MA

Model:

S6-150 MA

S9-100 MA

T3 MA

Realization:

6 drawers

GN 1/1,

5 x 150 mm,

1 x 100 mm,

cooling

9 drawers

GN 1/1,

100 mm

cooling

3 x doors,

cooling

Power:

452 W / 230 V 50 Hz

414 W / 230 V 50 Hz

Temperature range:

0 °C - 10 °C

Temperature control:

electronic in 0.1°C steps

Dimensions:

W 1792 x D 700 x H 900 mm

Weight:

145.2 kg

172.0 kg

112 kg

We reserve the right to implement the technical modifications!

MA – refrigerated counters with backsplash

Operating conditions

Climate class for cooling equipment: N

Ambient temperature + 32 °C

Condensation temperature + 54 °C

Relative humidity 60 %

- 39 -

5. Installation and operation

5.1 Positioning and connection

Positioning

 Unpack the device while on the pallet and remove all packing material.

 Use a forklift to lift the device and move it to its destination. Remove the pallet and

put the device in its proper place.

 Never pull or push the device around, as it can turn over and the body or legs can

be damaged.

 Put the device in a safe place capable of supporting its weight.

 Never place the device on a flammable surface.

 Do not put the device near open flame, electric oven, heater or other source of

heat such as direct sunlight. High temperatures can have a negative impact on

the device’s performance and increase energy usage.

 Locate the device so that sufficient air circulation is ensured. Maintain a distance

of at least 5 cm from the rear of the device, 10 cm at the sides and 30 cm from

the ceiling and/or shelves.

 Never cover the device’s ventilation openings.

 Do not locate the device in placed with high humidity. Excessive humidity

can damage the device.

 Level the device using the legs.

 Position the device in such a way that the plug is easily accessible for quick

disconnecting when required.

 Before the first use, remove the protective foil from the device. Remove the foil slowly

not to leave glue residues. Remove possible glue residues with appropriate solvent.

CAUTION!

Never remove the rating plate and any warning signs from the device.

- 40 -

Connection

DANGER! Electric shock hazard!

The device can cause injuries due to improper installation!

Before installation and connecting the local power grid

specification should be compared with that of the device

(see rating plate). Connect the device only in case of

compliance!

 Before connecting the device to the power supply during the first use, position the

device and leave it for at least 2 hours for the coolant to flow down.

 After a power outage or after removing the plug from its socket do not connect

the device to a power source for at least 5 minutes.

 The power supply circuit with the socket must be protected by the fuse of at least 16A.

Connect the device directly to a single grounded socket. Do not use any power bar or

multiple socket.

5.2 Operation

 After unpacking and prior to connection, clean the device according to the

instructions in 6 "Cleaning and maintenance".

 Connect the device to a single, grounded outlet.

 Turn the device on via the ON/OFF switch located at the front. The green power

control light will come on.

 When turned on, the display will show the following: and . The default

temperature will also be shown.

 Before placing food products and beverages inside, the refrigerated counter

should first reach the desired temperature.

Digital temperature regulator

The default temperature is set at the factory and corresponds to an internal operating

temperature of 0 °C – 10 °C.

During normal operation the display will show the temperature as detected by the sensor.

Active functions will also be shown (table 1), while three buttons can activate/deactivate

some functions (table 2).

Page is loading ...

Bartscher 110804 Operating instructions

Bartscher 110804 Operating instructions

Bartscher 110804 Operating instructions

Related papers

Other documents