2. SPT
  3. 40052

SPT 40052 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the SPT 40052 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IM-100 Control Board
This is a photo of the Control Panel for our IM-100.
To remove the board, you first need to remove the label, as shown in the photo below. (You can do so
using a thin, or sharp object)
Then you’ll need to remove the two screws indicated in the photo below (circled in red).
From there you should be able to pull out the white cover. You will need to wiggle it to get it out.
Behind the white cover, you can see the back of the control board. The Board is connected by 4 screws.
They are circled in red, remove those 4 screws.
Make sure that the buttons on the board are aligned with the buttons on the white cover.
/