Acrosser Technology AR-R6006 Owner's manual

Revision: 1.0

AR-R6006

System Guide

1

Revision: 1.0

Copyright

Manual’s first edition:

For the purpose of improving reliability, design and function, the information in this

document is subject to change without prior notice and does not represent a commitment on the

part of the manufacturer.

In no event will the manufacturer be liable for direct, indirect, special, incidental, or

consequential damages arising out of the use or inability to use the product or documentation,

even if advised of the possibility of such damages.

This document contains proprietary information protected by copyright. All rights are

reserved. No part of this Manual may be reproduced by any mechanical, electronic, or other

means in any form without prior written permission of the manufacturer.

Trademarks

AR-B6006、AR-R6006 are registered trademarks of Acrosser; IBM PC is a registered

trademark of the International Business Machines Corporation; Atom™ is a registered

trademark of Intel Technologies Inc; Phoenix is a registered trademark of Phoenix Software

International Inc; other product names mentioned herein are used for identification purposes

only and may be trademarks and/or registered trademarks of their respective companies.

2

Revision: 1.0

Table of Contents

1. 5 Introduction to AR-R6006................................................................................

1.1 ……………………………………………………….…………..5 Specifications

1.2 ...............................................................................................5 Packing List

1.3 ....................................................................................6 System Dissection

2. …………………………………………...8 Procedure of Assembly/Disassembly

2.1. ........................................................................................8 HDD Installation

2.2. ................................................................................12 CF Card Installation

2.3. .....................................................................13 Installing SO-DIMM DRAM

2.4. .......................................................................13 Rack Bracket Installation

3. 15 AR-B6006 Board Guide…………………………………………………………...

3.1. .15 Introduction………………………………………………………….

………..

3.1.1. ............................................................................................15 Features

3.1.2. .....................................................................................16 Specification

3.1.3. ............................................................................17 Package Contents

3.1.4. ..................................................................................18 Block Diagram

3.2. .............................................................................19 Hardware Information

3.2.1. ......................19 Locations of IO ports & Jumper settings definition

3.3. ............................................................................................25 BIOS Setting

3.3.1. ..................................................................25 Main (System Overview)

3.3.2. ......................................................25 Advanced (Advanced Settings)

3.3.3. ....................................................................................................26 Intel

3.3.4. .............................................................................................26 Security

3.3.5. ........................................................................................27 HWMonitor

3.3.6. .................................................................................................27 Power

3.3.7. ...........................................................................28 Boot(Boot Setting)

3.3.8. .....................................................................................................28 Exit

3

Revision: 1.0

Appendix............................................................................................................29

Appendix A - Driver Installation and Programming Guide (Windows).........29

A-1 GPIO and Watchdog................................................................................29

A-2 API List and Descriptions..………………………………………………….30

Appendix B - Programming Guide (Linux) .....................................................34

B-1 GPIO and Watchdog................................................................................34

B-2 API List and Descriptions……………………………………………………34

4

Revision: 1.0

1. Introduction to AR-R6006

Acrosser's Rackmount Networking device AR-R6006 is a cost-effective and entry-level solution,

which is suitable for small office. Base on Intel ATOM D525 (dual cores & 1M cache) 1.8GHz

CPU, the AR-R6006 consumes very low power to save the total costs. We also put a quiet fan

to keep the low noise, which will not cause uncomfortable voice. By Six 10/100/1000Mbps LANs,

the AR-R6006 is sufficient for the small business security hardware solution.

Key features:

1. Intel® Atom™ processor D525 (1M Cache, 1.8 GHz)

2. Intel ICH8M Chipset

3. 204-pin DDR3 SO-DIMM socket x 2 , DDR3 up to 4GB

4. Intel 82574L 10/100/1000Mbps x 6

5. Support two pairs LAN bypass feature

6. CF socket, 2.5”/3.5” Disk bay x 1, SATA II interface with power x 3

7. Console, VGA (pin header), USB 2.0 x 4 (2 x connectors, 2 x pin header)

8. Support console redirection

9. Support mini-PCI for feature expansion

1.1 Specifications

Item Description

System AR-R6006

CPU Board AR-B6006

System Dimension 430 mm x 44 mm x 320 mm (W x H x D)

1.2 Packing List

Description Q’ty

AR-R6006 System

1

Driver CD 1

Quick User Manual 1

Console Cable (P/N:190030627-G) 1

VGA Cable 1

Screw for bracket (for Rack + HDD bracket) 1

Rack bracket with Screw x 3 2

USA or Europe or Japan or UK power cord 1

5

Revision: 1.0

1.3 System Dissection

(1) Dimensions

(2) Front Panel

(3) Back Panel

6

Revision: 1.0

(4) System Configuration

Item Description Quantity

1

Top Cover 1

2 Disk Bracket 1

3 Bottom Base 1

4 1U Ear Bracket 1

5 Membrane 1

6 AR-B6006 Mainboard 1

7 CF Card Bracket 1

8 Power Supply 1

9 System FAN 2

7

Revision: 1.0

2. Procedure of Assembly/Disassembly

2.1. HDD Installation

The following instructions will guide you to install 2.5” HDD step-by-step.

1. Unfasten 2 screws of chassis top cover and take off it.

8

Revision: 1.0

Release 3.5” HDD bracket by unfastening 4 screws.

Fix HDD with HDD bracket by 4 screws.

9

Revision: 1.0

Fix HDD with HDD bracket by 4 screws.

Plug SATA power cable into motherboard.

10

Revision: 1.0

Connect SATA cable and SATA power cable with HDD module.

Assemble top cover back by fastening the 2 screws.

11

Revision: 1.0

2.2. CF Card Installation

Open the top cover (the same as above steps).

Release CF Card bracket by unfastening 2 screws

Push CF card into CF socket.

Fix CF card bracket by 2 screws.

12

Revision: 1.0

2.3. Installing SO-DIMM DRAM

Open the top cover (the same as above steps).

Install the SO-DIMM in the chassis

2.4. Rack Bracket Installation

Take out the screws and rack bracket from packing bag.

13

Revision: 1.0

Fix the Rack bracket to chassis by fastening 6 screws.

14

Revision: 1.0

15

3. AR-B6006 Board Guide

3.1. Introduction

Welcome to the AR-B6006 series Computer. The AR-B6006 series is a Networking board for

Micro-box and Rack-mount with six sets of GbE LAN. Intel Atom (Pineview-D) D525 +ICH8M.

AR-B6006 is a Networking board for micro-box and Rack-mount Platform with Intel Atom D525

+ICH8M, 6 *10/100/1000 LAN with by-pass.

3.1.1. Features

 Processor:

 AR-B6006D525: Intel® Atom™ Processor D525 (Dual Core, 2X 512K L2 Cache, 1.8

GHz)

 Chipset: Intel® ICH8M

 Memory: DDR3 800/1333 MHz SO-DIMM, Maximum 4GB

 Display: VGA

 Storage: 1x CF, 3x SATA II

 Communication: 6x Gbps Ethernet, 4x USB 2.0, 2x RS-232

 General: Watchdog timer, 4-bit GPIO

Revision: 1.0

3.1.2. Specification

System

Thermal solution FAN connector for CPU FAN

Fan connector for system FAN*2

CPU Intel® Atom™ processor D525 (1M Cache, 1.8

GHz)

System Memory 204-pin DDR3 SO-DIMM socket x2 , DDR3 up

to 4GB, non-ECC and un-buffered

BIOS 1. Support console redirection (default enable)

2. Support bypass setting (default disable)

Phoenix

Legacy BIOS

ROM 1MB

System Chipset Intel ICH8M

Super I/O Winbond-W8627DHG-P

Network Interface

Ethernet 6 *RJ45

Intel 82574L (10/100/1000Mbps) (L1~L6),

LAN by-Pass LAN1 and LAN2 support by-pass function

LAN3 and LAN4 support by-pass function

Reserve 1*3 pin Jumper for Hardware select

bypass status

Default:

normal

Bypass

I/O

Front panel 1.Power /HDD/Bypass LED:

2.LAN1/ LAN2/ LAN3/ LAN4/LAN5/LAN6 LED:

1000, 10/100, Act.

Rear panel From left to right:

2 * USB (use standby power)

COM port (RJ45)

LAN6/LAN5/LAN4/ LAN3/ LAN2/LAN1

Internal I/O

1. 2xUSB 2.0(2.54 mm pitch)

2. Mini-PCI

3. GPIO

4. LPT pin head

5. Power input

6. KB/MS

7. VGA pin head

8.PWRSW

9. COM-2

Storage

CF 1 x Compact Flash socket

(Master mode) Support UDMA

SATA 3x SATAII interface with power x 1

Others

Watchdog Timer Software programmable 1~255 Seconds,

Battery Lithium Battery, 3V 220mAH (CR2032)

Hardware

monitoring

CPU voltage

CPU and System Temperature

OS support Fedora 14. 64-bit

Ubuntu 10.04 32-bit, Ubuntu 10.04 64-bit

WIN XP 32-bit,

16

Revision: 1.0

17

Mechanical

Dimension 210 mm x 140 mm

Operating

Temperature

0~60

o

C (32~140

o

F)

Storage

Temperature

-20~60

o

C (-4~176

o

F)

Relative

Humidity

10 to 95% @ 40°C, non-condensing

Power Supply N/A

Power

Requirements

24 Pin ATX Power Connector

BIOS Default setting

After power failure [Power On]

3.1.3. Package Contents

Description Q’ty

AR-B6006 Mainboard

1

Driver CD

1

Quick User Manual 1

Console Cable (P/N:190030627-G) 1

VGA Cable 1

Revision: 1.0

3.1.4. Block Diagram

18

Revision: 1.0

3.2. Hardware Information

3.2.1. Locations of IO ports & Jumper settings definition

19

4 3 5

13

15

14

16

11 12

10

9 8 7 6

17

18

1

25

2

24

23 2122 20 19

Revision: 1.0

Item Name Description

1 Mini PCI 124 pin mini PCI connector

2

J4（LED

Board）

Pin Description

1 3.3V

2 GND

3 3.3V

4 GND

3

J1(GPIO

)

Pin Description Pin Description

1 5v 2 12v

3 GPIO17 4 GPIO20

5 GPIO18 6 GPIO37

7 GND 8 GND

More Detail please see Note.2

4 PWRSW

Pin Description

1 Power button +

2 Power button -

3 Reset +

4 Reset -

5 ATX ATX 20P female connector

6 JUSB

Pin Description Pin Description

1 VCC 2 VCC

3 -DATA2 4 -DATA3

5 +DATA2 6 +DATA3

7 GND 8 GND

9 NULL 10 GND

20

Page is loading ...

Acrosser Technology AR-R6006 Owner's manual

Acrosser Technology AR-R6006 Owner's manual

Related papers

Other documents