Duerkopp Adler 581 User manual

Brand: Duerkopp Adler

Model: 581

Type: User manual

Duerkopp Adler 581 is a modern sewing machine that comes with a needle thread catcher, enabling efficient and convenient sewing. The needle thread catcher helps to prevent thread tangles and breakages, ensuring smooth and uninterrupted sewing. It is easy to install and activate, providing a reliable solution for various sewing applications.

Duerkopp Adler 581 is a modern sewing machine that comes with a needle thread catcher, enabling efficient and convenient sewing. The needle thread catcher helps to prevent thread tangles and breakages, ensuring smooth and uninterrupted sewing. It is easy to install and activate, providing a reliable solution for various sewing applications.

581

Additional Instructions

Fitting the needle thread catcher

All rights reserved.

Property of Dürkopp Adler AG and protected by copyright. Any reuse of these contents,

in

cluding extracts, is prohibited without the written approval in advance of Dürkopp Adler AG.

Copyright © Dürkopp Adler AG 2015

IMPORTANT

READ CAREFULLY BEFORE USE

KEEP FOR FUTURE REFERENCE

Table of contents

Additional Instructions 581 - 00.0 - 04/2015 1

1 Components in the parts set.....................................................3

2 Fitting the needle thread catcher..............................................4

3 Activating the needle thread catcher........................................8

4 Appendix .....................................................................................9

Table of contents

2 Additional Instructions 581 - 00.0 - 04/2015

Components in the parts set

Additional Instructions 581 - 00.0 - 04/2015 3

1 Components in the parts set

The parts set 0580 592054 is intended for class 581 machines.

Before fitting, check that the scope of delivery of the parts set is correct.

Part no. Quantity Designation

0791 581715 EN 1 Additional Instructions

0580 101610 1 Needle thread catcher

9710 061411 1 2x 3/2-way valve

9731 005004 1 Hose pure, 4 m

9790 060104 3 WI-E connection

Fitting the needle thread catcher

4 Additional Instructions 581 - 00.0 - 04/2015

2 Fitting the needle thread catcher

To fit the needle thread catcher:

Fig. 1: Initial state

Step

1. Fasten the needle thread catcher using both screws (3) in the holes (2)

on th

e cover (1).

2. Check that the needle thread catcher is positioned parallel to the

machin

e arm. If not, loosen the screws (4).

WARNING

Risk of electric shock from live parts!

Dangerous injuries to life and limb possible.

The needle thread catcher may only be fitted

by qualified specialists.

Switch off the machine and unplug the power plug.

Ensure the power plug cannot be unintentionally

reinserted.

(1) - Cover (2) - Holes

②

①

Fitting the needle thread catcher

Additional Instructions 581 - 00.0 - 04/2015 5

Fig. 2: Fastening the needle thread catcher

3. Route the compressed air lines (6) through the hole (5) in the machine

arm to the valve bank (7).

Fig. 3: Routing compressed air lines (1)

(3) - Screws (4) - Screws

(5) - Hole (6) - Compressed air lines

③

④

⑥

⑤

Fitting the needle thread catcher

6 Additional Instructions 581 - 00.0 - 04/2015

Fig. 4: Routing compressed air lines (2)

Fig. 5: Routing compressed air lines (3)

Fitting the needle thread catcher

Additional Instructions 581 - 00.0 - 04/2015 7

4. Fit 3/2-way valves (7) and (8) on the 4th valve position from the left

(see  Appendix, pg. 9, Wiring diagram).

5. Connect the hoses to the following 3/2-way valves:

•Y09

•Y10

•Y11

Fig. 6: Fitting and connecting 3/2-way valves

6. Set the needle thread catcher ( Service Instructions).

(7) - 3/2-way valve (8) - 3/2-way valve

⑦

⑧

Activating the needle thread catcher

8 Additional Instructions 581 - 00.0 - 04/2015

3 Activating the needle thread catcher

To activate the needle thread catcher:

Step

1. Open the side cover (1).

Fig. 7: Initial state

2. Connect bridge (2):

• Bridge closed = Needle thread catcher installed

• Bridge open = Needle thread catcher not installed

Fig. 8: Connecting bridge

3. Close the side cover (1) again.

(1) - Side cover

(2) - Bridge

①

②

Appendix

Additional Instructions 581 - 00.0 - 04/2015 9

4Appendix

Fig. 9: Wiring diagram excerpt

Appendix

10 Additional Instructions 581 - 00.0 - 04/2015

DÜRKOPP ADLER AG

Potsdamer Str. 190

33719 Bielefeld

Germany

Phone: +49 (0) 521 925 00

E-mail: [email protected]m

www.duerkopp-adler.com

Subject to design changes - Part of the machines shown with additional equipment - Printed in Germany

© Dürkopp Adler AG - Additional Instructions - 0791 581715 EN - 00.0 - 04/2015

1
2
3
4
5
6
7
8
9
10
11
12
13
14

Duerkopp Adler 581 User manual

Brand: Duerkopp Adler

Model: 581

Type: User manual

Duerkopp Adler 581 is a modern sewing machine that comes with a needle thread catcher, enabling efficient and convenient sewing. The needle thread catcher helps to prevent thread tangles and breakages, ensuring smooth and uninterrupted sewing. It is easy to install and activate, providing a reliable solution for various sewing applications.

Download PDF

Related papers

Other documents