FRONT BACK
LEFT RIGHT
4 START THE NOTEBOOK.
Press the power button, then follow the on-screen instructions to
complete Windows setup.
2 CONNECT TO AC POWER.
Leave the AC adapter plugged in for at least three
hours the first time, so the battery will fully charge.
1 INSTALL THE BATTERY.
With the label side down, slide the battery into the
battery compartment until it clicks. Then lock it in place.
3 CONNECT TO THE INTERNET. (optional)
Connect the phone cord (included) to the
modem jack ( ) if using dialup Internet access.
Or connect your Ethernet ( ) or USB ( ) cable
(not included) if using high-speed access.
LCD panel release latch
Battery Indicator
Speaker
Speaker
Power Indicator
Memory card reader
Ventilation fan
Caution: Do not block
PC Card slot
IEEE 1394 port
USB ports
Microphone jack
Headphone jack
Ventilation fan
Caution: Do not
block
Kensington™ lock slot
Monitor port
Modem jack
USB ports
Power connector
Ethernet jack
S-Video out jack
Optical drive
