Aruba R9Y19A Reference guide

Brand: Aruba

Model: R9Y19A

Type: Reference guide

This manual is also suitable for

About the HPE Networking Comware 5960 Switch

Series configuration guides

The configuration guides describe the software features for the HPE 5960 switch series, and guide

you through the software configuration procedures. These configuration guides also provide

configuration examples to help you apply the software features to different network scenarios.

Configuration guide

Content

Fundamentals Configuration Guide

Describes how to use the command line interface of the switch, log in

to and set up the switch, and use the basic management functions.

This guide includes:

• CLI

• RBAC

• Loggin management

• FTP and TFTP

• File system management

• Configuration file management

• Software upgrade

• Automatic configuration

System Management Configuration

Guide

Covers the configuration of device system management & monitoring

and information center features.This guide includes:

• Basic Device Management

• Device Hardening

• Hardware resource management

• Process monitoring and maintenance

• Information Center

Interface Configuration Guide

Describes how to configure interfaces. This guide includes:

• Bulk interface

• Ethernet interface

• Loopback, null, and inloopback interface

Layer 2—LAN Switching

Configuration Guide

Describes LAN switching features and tasks for Layer 2 network

configuration. You can use these features to divide broadcast

domains, remove Layer 2 loops, isolate users within a VLAN, and so

on. This guide includes:

• MAC address table

• Ethernet link aggregation

• VLAN

• Loop detection

• Spanning tree

• LLDP

• PFC

• Service loopback group

Configuration guide

Content

Layer 3—IP Services Configuration

Guide

Describes the IP services fundamentals and configuration

procedures. This guide includes:

• ARP

• IP addressing

• DHCP

• IP forwarding basics

• IP performance optimization

• IPv6 basics

• IPv6 neighbor discovery

• DHCPv6

Layer 3—IP Routing Configuration

Guide

Covers the routing technologies for IPv4 and IPv6 networks of

different sizes, route filtering, route control, and policy based routing.

This guide includes:

• Basic IP routing

• Static routing

• OSPF

• IS-IS

• Basic BGP

• Advanced BGP

• Policy-based routing

• IPv6 static routing

• OSPFv3

• IPv6 policy-based routing

• Routing policy

• DCN

MCE Configuration Guide Covers MCE features. This guide includes:

• MCE.

ACL and QoS Configuration Guide

Describes how to classify traffic with ACLs, and allocate network

resources and manage congestions with QoS technologies to improve

network performance and network use efficiency. You can use ACLs

to help other function modules (such as QoS and IP routing) classify or

filter traffic. This configuration guide includes:

• ACL

• QoS

• Time range

• Data buffer

User Access and Authentication

Configuration Guide

Covers fundamentals and configuration of user access and

authentication configuration features.This guide includes:

• AAA

• Password Control

Configuration guide

Content

Security Configuration Guide

Covers security features. The major security features available on the

switch include: secure management, attack protection, and so on.

This guide includes:

• SSH

• Packet filter

• DHCP Snooping

• ARP attack protection

• ND attack defense

• Attack detection and prevention

• IP-based attack prevention

• uRPF

High Availability Configuration

Guide

Describes high availability technologies and features available on the

switch for failure detection and failover. Failure detection technologies

focus on fault detection and isolation. Failover technologies focus on

network recovery. This guide includes:

• Monitor Link

• BFD

• Interface collaboration

Network Management and

Monitoring Configuration Guide

Describes features that help you manage and monitor your network,

for example, manage system events, and test network connectivity.

This guide includes:

• Ping and Tracert

• System debugging

• NQA

• NTP

• SNMP

• Sampler

• Mirroring

• sFlow

Telemetry Configuration Guide

Describes the application scenarios, fundamentals, and configuration

of Telemetry.

Telemetry is a remote data collection technology for monitoring device

performance and operating status. This guide includes:

• gRPC

• INT

• Flow Group

• Telemetry Stream

Network Programmability

Configuration Guide

Covers features for network programmability.This guide includes:

• RESTful

• Tcl

• Python

• NETCONF

Aruba R9Y19A Reference guide

Brand: Aruba

Model: R9Y19A

Type: Reference guide

This manual is also suitable for

Download PDF

report

Aruba R9Y19A Reference guide

This manual is also suitable for

Aruba R9Y19A Reference guide

Related papers

Other documents