Aruba R9Y12A Reference guide

Type
Reference guide

This manual is also suitable for

About the HPE Networking Comware 5960 Switch
Series configuration guides
The configuration guides describe the software features for the HPE 5960 switch series, and guide
you through the software configuration procedures. These configuration guides also provide
configuration examples to help you apply the software features to different network scenarios.
Configuration guide
Content
Fundamentals Configuration Guide
Describes how to use the command line interface of the switch, log in
to and set up the switch, and use the basic management functions.
This guide includes:
CLI
RBAC
Loggin management
FTP and TFTP
File system management
Configuration file management
Software upgrade
Automatic configuration
System Management Configuration
Guide
Covers the configuration of device system management & monitoring
and information center features.This guide includes:
Basic Device Management
Device Hardening
Hardware resource management
Process monitoring and maintenance
Information Center
Interface Configuration Guide
Describes how to configure interfaces. This guide includes:
Bulk interface
Ethernet interface
Loopback, null, and inloopback interface
Layer 2LAN Switching
Configuration Guide
Describes LAN switching features and tasks for Layer 2 network
configuration. You can use these features to divide broadcast
domains, remove Layer 2 loops, isolate users within a VLAN, and so
on. This guide includes:
MAC address table
Ethernet link aggregation
VLAN
Loop detection
Spanning tree
LLDP
PFC
Service loopback group
Configuration guide
Content
Layer 3IP Services Configuration
Guide
Describes the IP services fundamentals and configuration
procedures. This guide includes:
ARP
IP addressing
DHCP
IP forwarding basics
IP performance optimization
IPv6 basics
IPv6 neighbor discovery
DHCPv6
Layer 3IP Routing Configuration
Guide
Covers the routing technologies for IPv4 and IPv6 networks of
different sizes, route filtering, route control, and policy based routing.
This guide includes:
Basic IP routing
Static routing
OSPF
IS-IS
Basic BGP
Advanced BGP
Policy-based routing
IPv6 static routing
OSPFv3
IPv6 policy-based routing
Routing policy
DCN
MCE Configuration Guide Covers MCE features. This guide includes:
MCE.
ACL and QoS Configuration Guide
Describes how to classify traffic with ACLs, and allocate network
resources and manage congestions with QoS technologies to improve
network performance and network use efficiency. You can use ACLs
to help other function modules (such as QoS and IP routing) classify or
filter traffic. This configuration guide includes:
ACL
QoS
Time range
Data buffer
User Access and Authentication
Configuration Guide
Covers fundamentals and configuration of user access and
authentication configuration features.This guide includes:
AAA
Password Control
Configuration guide
Content
Security Configuration Guide
Covers security features. The major security features available on the
switch include: secure management, attack protection, and so on.
This guide includes:
SSH
Packet filter
DHCP Snooping
ARP attack protection
ND attack defense
Attack detection and prevention
IP-based attack prevention
uRPF
High Availability Configuration
Guide
Describes high availability technologies and features available on the
switch for failure detection and failover. Failure detection technologies
focus on fault detection and isolation. Failover technologies focus on
network recovery. This guide includes:
Monitor Link
BFD
Interface collaboration
Network Management and
Monitoring Configuration Guide
Describes features that help you manage and monitor your network,
for example, manage system events, and test network connectivity.
This guide includes:
Ping and Tracert
System debugging
NQA
NTP
SNMP
Sampler
Mirroring
sFlow
Telemetry Configuration Guide
Describes the application scenarios, fundamentals, and configuration
of Telemetry.
Telemetry is a remote data collection technology for monitoring device
performance and operating status. This guide includes:
gRPC
INT
Flow Group
Telemetry Stream
Network Programmability
Configuration Guide
Covers features for network programmability.This guide includes:
RESTful
Tcl
Python
NETCONF
  • Page 1 1
  • Page 2 2
  • Page 3 3

Aruba R9Y12A Reference guide

Type
Reference guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI