2. HoMedics
  3. AP-T20
AP-T20

HoMedics AP-T20, AP-T20 TotalClean 5-in-1 Tower Air Purifier User manual

  • Hello! I've reviewed the user manual for the HoMedics AP-T20FL Air Purifier. This document outlines the simple process for replacing the HEPA-type filter, which should be done every 12 months. It guides you through the steps, including how to reset the filter indicator, so feel free to ask me any questions you may have about it!
  • When should I replace the HEPA-type filter?
    What does the replace filter light indicate?
    How do I reset the filter indicator after replacing the filter?
8
To purchase genuine HoMedics replacement HEPA-type filters, model AP-T20FL, go back to your retailer where you purchased your air purifier,
or visit www.homedics.com (US), www.homedics.ca (CAN).
1. Unplug the air purifier. Pull
the indents on each side of
the grille cover.
2. Remove the grille cover and
set aside.
FILTER REPLACEMENT
REPLACE FILTER LIGHT
The replace filter light illuminates when it is time to replace the HEPA-type filter based on the air purifier’s
hours of use.
REPLACING THE HEPA-TYPE FILTER
For optimal performance, replace every 12 months under normal usage conditions.
3. Pull the tabs to remove the
old filter.
4. With the filter tabs facing outward,
slide the new HEPA-type filter into
the filter cavity.
9
5. Place the tabs at the bottom of
the grille cover into the base of the
air purifier. Gently push the grille
cover until it snaps into place.
6. Plug the power cord into a standard AC outlet. Turn the air
purifier on. Press and hold the ionizer button for 3 seconds
to reset the indicator.
/