Page 1 / 3
MULTI-TIER PLANT STAND
LAM-639
CHOKING HAZARD — This item contains small
parts that can be swallowed. Keep children away
during assembly.
WARNING
HELPFUL HINTS
• Sunnydaze Decor advises reading this manual
thoroughly and assembling the item soon after
purchase. Check that all parts are accounted for
and familiarize yourself with the assembly before
beginning.
• Assemble components on a soft, clean surface to
avoid damaging the finish.
• Do not fully tighten hardware until all components
are assembled. If the hardware is tightened too
soon, mounting holes may not align, and parts
may not easily fit together.
• This item was treated with teak oil at the factory.
Apply a suitable wood oil at least once a year,
or when the wood looks particularly dry. Left
untreated, the wood will weather to a silvery gray
color.
• Save this manual for future reference.
LY451
A5-Hole Shelf Support 4
B1 3-Hole Shelf Support 2
B2 2-Hole Shelf Support 2
CBottom Shelf 1
DSingle Shelf 1
EDouble Shelf 2
FTop Shelf 2
GJCBC M6 x 40mm Bolt 30
HHex Key 1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,
2-PERSON
ASSEMBLY
RECOMMENDED
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
07/2020
Page 2 / 3
ASSEMBLY
1. Lay Bottom Shelf (C) on the ground with the slats
facing upwards, as shown.
2. Locate the Inset End of Bottom Shelf (C) (see
diagram).
3. Connect both 2-Hole Shelf Support (B2) to the inside
of the inset ends by hand-tightening 2x JCBC M6 x
40mm Bolt (G).
4. Connect both 3-Hole Shelf Support (B1) to the
inside edge of Bottom Shelf (C), as shown, by hand-
tightening 2x JCBC M6 x 40mm Bolt (G).
5. Ensuring the closely-spaced holes are at the bottom,
connect each 5-Hole Shelf Support (A) to the inside
edge of the bottom shelf by hand-tightening 4x JCBC
M6 x 40mm Bolt (G).
Read carefully and understand assembly before beginning.
Please note: shelf supports install on the inside of all shelves.
Do not fully tighten any bolt all until all components have been assembled.
LY451
A: 4 B1: 2 B2: 2 G: 8
STEP 1
1. Place Single Shelf (D) over the 5-hole and 3-hole
shelf supports, as shown.
2. Secure the shelf to the shelf supports by hand-
tightening 6x JCBC M6 x 40mm Bolts (G).
D: 1 G: 6
STEP 2
Inset End
07/2020
Page 3 / 3LY451
1. With the at edge facing outward, slide the rst
Double Shelf (E) over the 5-hole shelf supports and
secure by hand-tightening 4x JCBC M6 x 40mm Bolt
(G).
2. With the at edge facing inward, slide the second
Double Shelf (E) over the 5-hole shelf supports and
secure by hand-tightening 4x JCBC M6 x 40mm Bolt
(G).
E: 2 G: 8
STEP 3
1. Place the rst Top Shelf (F) over the 5-hole shelf
supports and secure by hand-tightening 4x JCBC
M6 x 40mm Bolt (G).
2. Place the second Top Shelf (F) over the 2-hole and
3-hole shelf supports and secure by hand-tightening
4x JCBC M6 x 40mm Bolt (G).
F: 2 G: 8
STEP 4
1. Gently tighten all bolts using Hex Key (H).
H: 1
STEP 5 (NOT SHOWN)
USE & CARE
SAFE USE: Only use on a at, level surface.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING:
Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces with a soft cloth.
MAINTENANCE: This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or
when the wood looks particularly dry. Follow application instructions as noted with the suitable wood oil (not included).
STORAGE: Protect this item from ice and snow. Store indoors, in a dry location. Covering the unit while in storage will
help prevent dust buildup.
07/2020
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Sunnydaze Decor LAM-622 Operating instructions
-
-
-
-
-
-
-
-
-