Pepperl+Fuchs IDM-Z2-x64-M-* Owner's manual

TECHNICAL INFORMATION

IDM Programming manual (IDMxxx-4xx)

MOBILE HANDHELD SCANNER

Described products

IDM Mobile handheld scanners (IDMxxx-4xx)

Manufacturer

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Germany

Legal information

This work is protected by copyright. Any rights derived from the copyright shall be reserve for SICK

AG. Reproduction of this document or parts of this document is only permissible within the limits of

the legal determination of Copyright Law. Any modification, abridgment or translation of this

document is prohibited without the express written permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

Original document

This document is an original document of SICK AG.

About This Manual

This programming manual provides general instructions on setting up Mobile handheld scanners.

 Chapter 1, Overview

This chapter contains an overview of the system commands, quick set commands, family codes,

and option codes used when setting up IDM scanners. It also presents general information on

the programming procedures, as well as simple flowcharts to help users better understand the

configuration process.

 Chapter 2, Host Interface Settings

This chapter presents different parameters to help users with host interface selection and related

configurations. Here, you will find settings that pertain to keyboard interface output (such as

keypad layout and code pages), and serial interface output (such as baud rate, data frame, and

more).

 Chapter 3, Barcode Reading Control

This chapter contains the parameters that will help users set up their scanners to read different

types of barcodes supported by IDM scanners. Corresponding detailed settings of each code type

are also collected in this chapter. Users can enable the Barcode ID function to identify the type

of code scanned.

 Chapter 4, Operation Modes

This chapter provides a complete list of available operation modes for each product series. To

fulfill the needs of different application scenarios, the scanners’ default modes and available mode

options vary from series to series.

 Chapter 5, Operation Control

This chapter presents the parameters related to operation of your scanner. In it, you will find

settings for functionalities, including general scanner settings, user feedback control such as

buzzer and vibration, and special parameters for different scanner.

 Chapter 6, Bluetooth Settings

The information contained in this chapter pertains to the Bluetooth-related settings of IDM

Bluetooth scanners. Presented herein are the parameters for exclusive functions of Bluetooth

models (such as batch scanning and validation scanning), as well as general Bluetooth settings

related to the device name, security, radio link and time-out settings.

 Chapter 7, Data Modifications

This chapter presents the different parameters for altering data before the scanner transmits it.

Here, you will find the option to add extra characters or to include an informative element. You

can also find the parameters to control the powerful GS1 parsing tool.

 Appendix

The Appendix contains additional information that is essential to the programming of your Mobile

handheld scanners. In it, you will find useful tables pertaining to 1D barcode ID, 2D barcode ID,

keyboard function codes, ASCII/HEX conversion, and code pages. This section also includes quick

set commands, systems commands, as well as option codes.

Other Documentation

You may also refer to the documents below for additional information.

 IDM Quickstart

Quick introduction to scanner set-up and operation.

 IDM Operating instructions

Information pertaining to the setup and operation of Mobile handheld scanners.

 IDM Serial Command Manual

Information on using serial commands to program Mobile handheld scanners.

Table of Contents

About This Manual ..................................................................................................................................... 3

Other Documentation ................................................................................................................................ 4

1 OVERVIEW ....................................................................................................................... 9

Introduction...........................................................................................................................................10

System Commands ...................................................................................................................................10

Family Codes .............................................................................................................................................10

Option Codes ............................................................................................................................................10

Quick Set Commands ...............................................................................................................................10

iCode..........................................................................................................................................................10

Programming Procedures ..................................................................................................................11

Legend .......................................................................................................................................................11

Programming Flowcharts...................................................................................................................12

Program & End .........................................................................................................................................12

System List, Group & Master Default......................................................................................................13

Single Scan Selection ...............................................................................................................................14

Multiple Scans Selection...........................................................................................................................15

Cycling Scan Selection .............................................................................................................................16

Dual Level Selection .................................................................................................................................17

2 INTERFACE SETTINGS ...................................................................................................19

Host Interface Selection ....................................................................................................................20

Handheld Scanners ..................................................................................................................................20

HID Keyboard Interface .....................................................................................................................21

Keyboard Caps Lock .................................................................................................................................21

Keyboard Caps Lock Release ...................................................................................................................22

Key Pad Emulation ...................................................................................................................................23

Keyboard Upper/Lower Case ...................................................................................................................24

Intercharacter, Intermessage, Interfunction Delay ...............................................................................25

Keyboard Country Layout ........................................................................................................................26

Encoding Country Code Page ..................................................................................................................27

Keyboard Output Country Code Page .....................................................................................................28

User-defined Function Key.......................................................................................................................29

USB Data Merge .......................................................................................................................................30

Serial Interface .....................................................................................................................................31

Serial STX/ETX Transmit ..........................................................................................................................31

Intermessage, Intercharacter, and Interfunction Delay........................................................................32

Serial Handshaking Protocol ....................................................................................................................33

Serial Response Timeout, Baud Rate, Data Frame ................................................................................34

Encoding Country Code Page ..................................................................................................................35

Serial Output Country Code Page ...........................................................................................................36

Serial NAK Retry Count ............................................................................................................................37

Serial ACK Indication ................................................................................................................................38

Table of Contents

3 BARCODE READING .......................................................................................................40

Code ID ...................................................................................................................................................41

Code ID Transmit .....................................................................................................................................41

Code ID – 1 Character .............................................................................................................................42

Barcode Readability ............................................................................................................................44

Readable Barcode Settings ......................................................................................................................44

Barcode Settings ..................................................................................................................................45

Code 39/32, Trioptic Code 39 .................................................................................................................45

Code 39 .....................................................................................................................................................46

Code 93 .....................................................................................................................................................50

Code 128 ...................................................................................................................................................51

Codabar .....................................................................................................................................................53

UPC ............................................................................................................................................................56

EAN ............................................................................................................................................................60

UCC Coupon Extended Code ...................................................................................................................65

IATA ...........................................................................................................................................................66

Interleaved 25 (ITF) .................................................................................................................................68

Code 25 Family .........................................................................................................................................69

Code 11 .....................................................................................................................................................72

MSI ............................................................................................................................................................74

UK/Plessey ................................................................................................................................................76

Telepen......................................................................................................................................................78

Composite Code........................................................................................................................................80

PDF417, MicroPDF417 ..............................................................................................................................81

QR Code ....................................................................................................................................................82

Data Matrix ...............................................................................................................................................85

MaxiCode ...................................................................................................................................................87

Aztec Code ................................................................................................................................................88

Postal Code Settings ...........................................................................................................................90

Australia Post Code ..................................................................................................................................90

British Post Code ......................................................................................................................................91

Netherlands KIX Code, Posi LAPA Code .................................................................................................92

Japan Post, Korea Post Code ...................................................................................................................93

US Planet ...................................................................................................................................................94

US POSTNET .............................................................................................................................................95

Intelligent Mail ..........................................................................................................................................96

GS1 Settings ..........................................................................................................................................97

GS1 128 .....................................................................................................................................................97

GS1 DataBar .............................................................................................................................................98

4 OPERATION MODES .................................................................................................... 101

Corded Handheld Scanners ...................................................................................................................102

Cordless Handheld Scanners .................................................................................................................103

5 OPERATION CONTROL ................................................................................................ 105

Scanner Operation .............................................................................................................................106

Table of Contents

Reread Delay, Good Read Delay ...........................................................................................................106

Handheld Decode Timeout ....................................................................................................................107

Handsfree Decode Timeout ...................................................................................................................108

2D Image Sensitivity ..............................................................................................................................109

1D Barcode Inverse Reading .................................................................................................................110

Handsfree Timeout .................................................................................................................................111

Auto-sense Control .................................................................................................................................112

Auto-sense Mode Select.........................................................................................................................113

Handheld & Handsfree Center Alignment ............................................................................................114

Unique Barcode Reporting .....................................................................................................................115

2D Smart Scene ......................................................................................................................................116

1D Reading Redundancy........................................................................................................................117

1D Scan Rate ..........................................................................................................................................118

1D Reading Direction Indication ...........................................................................................................119

1D Barcode Forward/Backward-reading Indication .............................................................................120

Scanner Light Control .......................................................................................................................121

2D Illumination & Aiming Control .........................................................................................................121

2D Aiming Select, Pre-decode Aiming Timeout ...................................................................................122

User Interactions ...............................................................................................................................123

Buzzer Tone, Buzzer Volume .................................................................................................................123

Good Read Beeping ................................................................................................................................124

Power On/Off Beeping ...........................................................................................................................125

Good Read Indicator, Power-on Indicator ............................................................................................126

Vibration Control .....................................................................................................................................127

Good Read Duration ...............................................................................................................................128

6 BLUETOOTH SETTINGS ............................................................................................... 130

General Bluetooth Settings .............................................................................................................131

BT Device Name .....................................................................................................................................131

BT PIN Code ...........................................................................................................................................132

BT Link Quality .......................................................................................................................................133

BT Out-of-range Scanning .....................................................................................................................134

BT Radio Off Timeout, Connected & Disconnected .............................................................................135

BT Power off Timeout ............................................................................................................................136

BT On-screen Keyboard .........................................................................................................................137

BT HID Transmit Delay ..........................................................................................................................138

BT Connect Beeping Control & Select...................................................................................................139

BT Battery Low Beeping ........................................................................................................................140

BT Low Power Link Indicator.................................................................................................................141

BT Sniff Control ......................................................................................................................................142

BT Cradle PAIR Lock ..............................................................................................................................143

Bluetooth Special Modes ..................................................................................................................144

Batch Scanning Link Control ..................................................................................................................144

Batch Scanning Data Transmit ..............................................................................................................145

Batch Scanning Data Delete ..................................................................................................................146

Batch Scanning ID Output .....................................................................................................................147

Batch Scanning Quantity Transmit........................................................................................................148

Table of Contents

Batch Scaning Field Delimiter ................................................................................................................149

Validation Scanning Link Control ...........................................................................................................150

Validation Scanning Master Data ..........................................................................................................151

Validation Scanning Output Select ........................................................................................................152

7 DATA MODIFICATIONS ............................................................................................... 154

Global Settings ....................................................................................................................................155

Preamble .................................................................................................................................................155

Postamble................................................................................................................................................156

Record Suffix (Keyboard).......................................................................................................................157

Record Suffix (Serial) .............................................................................................................................158

Dollar Sign Convert ................................................................................................................................159

FNC1 Transmit ........................................................................................................................................160

Data Length Transmit ............................................................................................................................161

Code ID Transmit ...................................................................................................................................162

ECI ID Transmit ......................................................................................................................................163

GS1 Settings ........................................................................................................................................164

GS1 Special Function ..............................................................................................................................164

GS1 1st FNC1 Transmit ..........................................................................................................................165

GS1 Noninitial FNC1 Transmit ...............................................................................................................166

GS1 AI Transmit .....................................................................................................................................167

GS1 Failure Rule .....................................................................................................................................168

GS1 Prefix/Suffix Output ........................................................................................................................169

GS1 Format Mismatch Rule ...................................................................................................................170

GS1 Date Field ‘DD=00’ Transmit .........................................................................................................171

GS1 Decimal Point Insert .......................................................................................................................172

GS1 Element String Separator ...............................................................................................................173

GS1 Data Separator ...............................................................................................................................174

APPENDIX ...................................................................................................................... 176

Code ID Table ......................................................................................................................................177

Code ID for 1D Barcodes .......................................................................................................................177

Code ID for 2D Barcodes .......................................................................................................................179

ASCII Input Shortcut ........................................................................................................................180

HEX/ASCII Reference Table ..................................................................................................................180

Function Key Output Table ..............................................................................................................181

Function Key Character Table.........................................................................................................182

Code Page .............................................................................................................................................188

Table of corresponding languages ........................................................................................................188

Unicode Hex Input Setup .......................................................................................................................189

1 OVERVIEW

This chapter contains an overview of the system commands, quick set

commands, family codes, and option codes used when setting up IDM

scanners. It also presents general information on the programming

procedures, as well as simple flowcharts to help users better understand

the device configuration process.

1 OVERVIEW

Introduction

IDM command barcodes are specially designed barcodes that allow you to program IDM scanners.

They can be grouped into three main categories: System Commands, Family Codes and Option

Codes.

Detailed explanations and programming flowcharts are provided below.

System Commands

System Commands direct IDM scanners to perform immediate operations, ie. enter programming

mode (PROGRAM), exit programming mode (END), list system information (SYSLIST), andreturn

to factory settings (F_DEFAULT). It will take a few seconds to complete the system command

operations, sousers must wait for the completion beeps before scanning another barcode.

Family Codes

Each parameter has a specific family code as its identification. There are over one hundred family

codes available.

Option Codes

Option Codes are a set of command barcodes represented by the characters “0–9”, “A–F” and FIN

(finish selection). For most settings, you must choose at least one option code after selecting a

family code to set the desired parameter.

Quick Set Commands

Quick set commands are command barcodes designed to rapidly set your IDM scanner to a particular

operation mode, host interface setting, Bluetooth link mode, or keyboard language layout.

iCode

The iCode is a macro command barcode designed to streamline your setup process. Instead of

scanning multiple command barcodes to configure their devices, users can easily generate a single

iCode that contains all of the relevant parameters. Your entire setup can thus be completed with

one quick scan. This simplified procedure lowers the risk of configuration errors, accelerates

deployments, and reduces field service and expenses.

1 OVERVIEW

Programming Procedures

Selected parameters are stored in the internal Flash Memory ASIC or non-volatile memory, even

after the scanner is powered off.

Most family codes require the Single Scan Selection programming procedure. Other family codes

have more sophisticated procedures, such as Multiple Scans Selection, Cycling Scan Selection

or Dual Level Selection. The flowcharts for each procedure is provided below.

The beeping indications for each IDM model can be found in the corresponding Operating

instructions. They will help you recognize the scanner’s status during configuration.

Legend

Conventions Descriptions

◄ Factory Default Value

PP Programming Procedure

SS : Single scan selection

MS : Multiple scans selection

CS : Cycling scan selection

DS : Dual level scan selection

OC1 Option Code 1

OC2 Option Code 2

( ) Necessary Option Code

[ ] Selectable Option Code

Family Code applies to all IDM models

Family Code only applied to IDM 2D scanner models:

IDM24x-4, IDM26x-4

Family Code only applied to IDM 1D scanner models:

IDM14x-4, IDM16x-4

1 OVERVIEW

Scan

“END”

The scanner will exit programming mode, store all

parameters in Flash Memory ASIC or non-volatile memory,

and emit a completion beep.

Scan

“PROGRAM”

The scanner will enter programming mode,

and block all non-programming functions.

Programming Flowcharts

Program & End

It will take 3-4 seconds for the parameters to be stored after scanning “END”. Please do not turn

off your scanner before hearing the completion beep. Otherwise, the parameters settings may be

lost.

1 OVERVIEW

Scan

“SYSLIST”

The scanner will send its model information and

firmware version number to the host device,

then emit a completion beep.

Scan

“M_DEFAULT”

The scanner will return all programmable

parameters to factory settings, and

emit a completion beep.

System List, Group & Master Default

1 OVERVIEW

Scan

“PROGRAM”

Scan

Family Code

Scan

Option Code

Repeat

Selection

Scan

“END”

No

Yes

Enter programming mode.

Select a family code.

Select an option code.

Decide whether or not to

select another family code.

Exit programming mode.

Single Scan Selection

1 OVERVIEW

Enter programming mode.

Select a family code.

Select one or more

option codes, as applicable.

Scan “FIN” to conclude an

option code selection.

Decide whether or not to

select another family code.

Exit programming mode.

Scan

“PROGRAM”

Scan

Family Code

Scan One or

More Option Codes

Repeat

Selection

Scan

“END”

No

Yes

Multiple Scans Selection

1 OVERVIEW

Enter programming mode.

Select a family code.

Select one or more option

codes with “SS” or “MS”

procedures.

Scan “FIN” to conclude an

option code selection.

Decide whether or not to

select another family code.

Exit programming mode

Scan

“PROGRAM”

Scan

Family Code

Scan One or More

Option Codes

Repeat

Selection

Scan

“END”

No

Yes

Scan “FIN”

Cycling Scan Selection

1 OVERVIEW

Dual Level Selection

Enter programming mode.

Select a family code.

1. Select one or more option

codes, as applicable.

2. Scan “FIN” to conclude

an option code selection.

Decide whether or not to

select another family code.

Exit programming mode.

Scan

Family Code

(1st) Scan One or

More Option Codes

Yes

Scan

“PROGRAM”

Repeat

Selection

Scan

“END”

No

(2nd) Scan One or

More Option Codes

1 OVERVIEW

2 INTERFACE SETTINGS

This chapter presents different parameters to help users with host

interface selections and related configurations. Here, you will find

settings that pertain to keyboard interface output such as keypad layout,

code pages, and serial interface outputs (such as baud rate, data frame,

and more).

2 INTERFACE SETTINGS

Host Interface Selection

Handheld Scanners

Program

Family Code PP Parameter Selection Option Code

Host Interface

MS

USB OEM

RS232 serial

USB CDC/Virtual COM

USB HID keyboard ◄

05

06

09

18

Pepperl+Fuchs IDM-Z2-x64-M-, IDM-Z1-x64-D-, IDM-Z1-x64-M-, IDM-Z2-x64-D- Owner's manual

Related papers

Other documents

Pepperl+Fuchs IDM-Z2-x64-M-*, IDM-Z1-x64-D-*, IDM-Z1-x64-M-*, IDM-Z2-x64-D-* Owner's manual

Related papers

Other documents

Pepperl+Fuchs IDM-Z2-x64-M-, IDM-Z1-x64-D-, IDM-Z1-x64-M-, IDM-Z2-x64-D- Owner's manual