Head Roll with Velcro Tab
Small Head Pillow with Velcro Tab
Small Profile Headrest with Velcro Tab
Midline Headrest with Velcro Tab
MULTI TILT USER GUIDE
Inside you will find:
· Getting your product ready
· General care
and maintenance
· Contact details for
aftercare service
Warranty
The Multi Tilt comes with a two year mechanical structure warranty. Repose will
repair or replace, at our discretion to the original purchaser, any of the following
parts found to be defective in materials and/or workmanship, metal frame, push
handle, footplate, and seat brace.
The Multi Tilt also comes with a one year warranty on the foam, fibre and
wooden internal frame.
Warranty exclusions: fabric damaged as a result from misuse, unauthorised
repairs, abuse, negligence, accidents, alteration or modification of the product,
damage caused by common carrier abuse and mishandling, any special
indirect, incidental and/or consequential damage.
Please note, warranty is return to base only. Repose will be responsible for the
collection from the location to which the chair was delivered. Suitable packaging
will be required to ensure the safe transportation of the product. Repose will not
be held responsible for damage from insufficient packaging.
Back Options Headrests
Accessories
Repose Furniture Ltd reserves the right to modify or change the specification without prior notification.
For terms and conditions of sale and or agreement please refer to your stockist.
If you are in any doubt about any aspect please contact your local
stockist for further assistance.
Thank you for supporting the British manufacturers
COMFORT
WITHOUT COMPROMISE
Part of the:
range
from Repose Furniture
Batch Number: _______________________________________________
Supplier: ____________________________________________________
Date: _______________________________________________________
Stockist:
Waterfall Three Tier back
Our Waterfall back is constructed from
three waterfall cushions that can all be
repositioned for the user’s comfort.
This backrest style is particularly
popular to accommodate users with a
spinal kyphosis (forward curvature).
Profile Waterfall
The Profile Waterfall back has two
lower waterfall cushions for lower
back support and a profile shaped
headrest to provide additional support
for the shoulder, neck and head.
Full Foam Lateral
The Full Foam Lateral back provides
midline support and a firm foam
back support. Combine this back
support with either a head pillow or
small profile headrest for firm but
comfortable support. This option is
particularly useful for users who require
additional support to maintain a
symmetrical seating position (where
they lean to one side if unsupported).
Profile Comfort Lateral
The Profile Comfort Lateral back provides midline
support but with soft filled fibre laterals for deep
comfort. The profile shape headrest provides
support for those with limited head control. Ideal
option for users requiring additional support but
with high pressure relief needs.
Half Foam Lateral
The Half Foam Lateral back provides firm
foam lateral lumbar and midline support
with the comfort of a large headrest.
The soft fibre filling in the pillow headrest
gives you the flexibility to change the
firmness for the user’s comfort.
Comfort Lateral
The Comfort Lateral back has a soft
removable cushion for lower back
and side lumbar support, without
being restricted, but offering midline
support.
Profile Half Foam Lateral
The Profile Half Foam Lateral back
provides firm foam lateral lumbar and
midline support with the comfort of a
large profile headrest. The soft fibre filling
in the profile headrest is designed to help
support the head for midline control and
provide a comfortable headrest.
www.reposefurniture.co.uk
D rings Repose Neoprene Lap
Strap and Pad
1" Blockers 2" Blockers
www.reposefurniture.co.uk
Manufacturers of
Specialist Seating Solutions
Thank you for choosing our Multi Tilt chair. The Multi Tilt
is an adaptable chair to accommodate the user’s specific
postural and pressure management requirements. The
chair is fully interchangeable with various seat and back
cushion options.
Please take time to read this user guide, before operating
the chair, to ensure that you understand the various
features and mechanisms and to enable you to fully
utilise and maintain the chair.
Please keep these instructions safe. Replacement
copies are available for download on our website:
www.reposefurniture.co.uk
Cautions and Warnings
The chair • MUST be adjusted and specified to suit the requirements of the user to
avoid any risk.
DO NOT• use the leg rest as a seat, this will cause the chair to tip and cause
damage to the internal frame.
DO NOT• attempt to move the chair without releasing the brakes on the wheels.
DO NOT• leave the brakes on whilst attempting to move the chair as this will
cause damage to the rubber wheels.
NEVER• close the leg rest without first releasing the side release handle (9), not
releasing the side handle will result in damage to the internal frame.
DO NOT• sit on the arms of the chair, this could result in damage to the arm and
the internal framework and could also potentially tip the chair.
CHECK• the user regularly, to ensure that the chair is not used inappropriately or
that the user is not left sitting in inappropriate positions over long periods of time.
It is • RECOMMENDED, that where users sit for long periods and require pressure
management that the tilt position is changed at regular intervals.
PLEASE• take care when altering the chair to avoid potential accidents from
trapped clothing or fingers.
ALWAYS• ensure that you observe the correct weight limits for the chair.
ALWAYS• follow the recommended cleaning instructions and when in doubt
please consult the supplier of the chair.
Options to Purchase
Pressure management cushions:
tilt
from Repose Furniture
Guide to Key Features 7 Locking the rear wheels
The rear wheels on the Multi Tilt can be locked
to stop the chair from moving. Press the
brake down to hold the wheel in to position.
Pressing the rear edge of the brake releases
the brake and frees the wheel for movement.
Make sure the wheels are not locked when
attempting to move the chair as this could
cause damage to the rubber wheel.
8 Removing the seat cushion
The seat cushion can easily be removed by
releasing the Velcro strip at the rear of the
cushion which is located under the seat base.
Simply pull the cushion towards you and
release the Velcro from the front edge. The
footrest may need to be elevated to gain easier
access to this. For further seat cushion options
see our brochure.
9 Changing the leg rest elevation
The side release handle allows the leg rest to
elevate when lifted and for you to adjust the leg
height positions. When released, this handle
will lock the leg rest into position. To retract
the footrest, release the handle and push with
pressure to close the footrest. Please do not
force the leg rest or sit on the leg rest when
elevated, as this is likely to cause damage to
the frame structure.
1
3
9
2
8
4
5
7
6
1 Manoeuvring your chair
Use the push handle at the rear of the chair
to move the chair and the user. It is important
to use the handle to move the chair, as using
other parts of the chair could cause damage to
the internal structure.
2 Changing the back cushions
The back cushions are attached with Velcro
and can be changed to suit the user and the
required seating posture. See our brochure for
available back options. Ensure the Velcro is
kept clean from fluff to avoid damage.
3 Changing the back angle of
the chair
Attached to the Push Handle at the rear of the
chair is a brake lever. Squeeze the break lever
and hold to release the Push Handle. Gently
push down on the Push Handle to tilt the chair.
Release the break lever to lock the chair in to
position.
Once your tilt position has been achieved
the angle of the leg rest can be adjusted for
comfort and support. See point 9.
4 Adjusting the footplate height
The footplate height is changed by pulling both
the left and the right plungers either side of the
plate. The plungers release the footrest and
allow the footplate to slide up or down to the
required height.
Lock the footplate into position by ensuring the
plungers click into the required slots.
5 Adjusting the footplate angle
Pull the right plunger to release and twist
slightly to lock the plunger out, now do the
same again with the left plunger. This will allow
the footrest to be completely folded away or
to be adjusted to two different positions to rest
the feet. The footplate can also be removed if
required.
6 Adjusting the seat depth
The seat depth is adjusted at the rear of the
chair by using the red locking button. Pull the
locking button to release the lock position
and whilst holding the handle pull or push the
mechanism to achieve the required position.
Secure this position by releasing the red
locking button so that it locks into the required
slot. Please ensure the seat depth is secured
into position before anyone sits in the chair.
Lock plunger
Lock plunger Correct Chair Usage
This chair has been designed with options for mobility, comfort and support; the
chair should be moved correctly by using the Push Handle at the back of the
chair. By following the guidelines provided you will ensure the long life of your
chair. Please do not sit on the arms or cause an obstruction to the working/
moving parts, as this will cause damage to the internal frame and potentially be
unsafe for the user. It may also invalidate the warranties.
Care and Cleaning
Cleaning your chair regularly will maintain the life of your product whilst keeping
it hygienically clean to use. The Vapour Permeable fabric is washable at 95° and
can be tumble dried. Please ensure the internal cushions are removed before
washing the covers. For cleaning instructions on the outer fabric please consult
your supplier for further details, as fabrics have different specifications and
requirements.
Please keep the frame free from dust build up on the internal frame, especially on
the moving joints, this will avoid dryness and allow the chair to freely work.
Viscoform
Memory foam (std)•
Reflex foam•
LOW MEDI UM
Pressure
Risk
Liquiform
Memory foam •
Liquid gel sac•
Reflex foam•
Pressure
Risk MEDIUM HIGH
AIRFORM
Airform
Memory foam •
3x manual air cushions•
Reflex foam•
Pressure
Risk HIGH
Celliform
Gelacell mesh gel•
Reflex foam•
Pressure
Risk MEDIUM HIGH
-
1
-
2
