luminii Plexineon Suspended Static Color Installation guide

Plexineon Suspended Static Color
luminii
Brand
luminii
Model
Plexineon Suspended Static Color
Type
Installation guide

This manual is also suitable for

The luminii Plexineon Suspended Static Color is a versatile lighting solution designed to add a touch of elegance to any setting. Suitable for wet locations, it's ideal for both indoor and outdoor use. Installation requires a qualified electrician and should be mounted with a Class 2 power unit providing 24 volts DC. With its durable construction and customizable mounting options, this fixture offers a reliable and stylish lighting experience.

The luminii Plexineon Suspended Static Color is a versatile lighting solution designed to add a touch of elegance to any setting. Suitable for wet locations, it's ideal for both indoor and outdoor use. Installation requires a qualified electrician and should be mounted with a Class 2 power unit providing 24 volts DC. With its durable construction and customizable mounting options, this fixture offers a reliable and stylish lighting experience.

Installation Instructions - Plexineon Suspended Static Color
Models: Plexineon Fixture Suspension Mount Static Color and Plexineon Rings Suspension Mount Static Color
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SUSPENDED MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.1
10182 022
1 / 4
Plexineon Straight Run Fixture
Plexineon Ring Surface Mount
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
Installation Instructions - Plexineon Suspended Static Color
Models: Plexineon Fixture Suspension Mount Static Color and Plexineon Rings Suspension Mount Static Color
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SUSPENDED MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.1
10182 022
2 / 4
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
1
Install Fixtures into Mounting Clips
A.1 Make an U shape with mounting clip installation tool, insert two edges into mounting clip. Place plexineon fixture insde the shape. Then push the fixture into clip.
A.2 Remove the tool. Make sure mounting clip is clipped right on the grip.
A.1 A.2
mounting clip installation tool
mounting clip
on grip
30”
standard
mounting clip
internal tooth
lock washers
screw
stand off hub
aircraft cable
plexineon fixture
standard mounting clip
Installed with stand off hub
1.1 Screw mounting clip to stand off hub. Use plunger to adjust the length of aircraft cable.
1.2 Fix the plexineon fixture into installed mounting clips. See step A for clipping instructions. Make sure mounting clips are certain distance apart.
1.1
1.2
NOTE: Standard Clips and Decorative Clips
have different required spacing.
standard mounting clip
30” space
decorative mounting clip
18” space
NOTE: Prior to installation all 24VDC wires must be present within 72” of the installation. Refer to the power supply
installation instruction for additional information.
NOTE: More than one person is recommended for this installation.
plunger
Installation Instructions - Plexineon Suspended Static Color
Models: Plexineon Fixture Suspension Mount Static Color and Plexineon Rings Suspension Mount Static Color
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SUSPENDED MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.1
10182 022
3 / 4
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
23
2.1 Align one standoff hub to the junction box and mark the other hubs’
location to the ceiling.
NOTE: Prior to installation all 24VDC wires must be present in junction box.
Refer to the power supply installation instruction for additional information.
45
3.1 Slide power cord end through strain relief, canopy, and cross bar.
Peel back power cord to expose wires.Connect strip (24VDC+) and black
(24VDC-) power supply wires to fixture red and black wires. Waterproof
wire nuts recommended in this step.
4.1 Insert wire nut and extra wire into junction box. Slide weld stud into the
center hole of cross bar. Screw cross bar into junction box holes or the
ceiling.
4.2 Slide canopy up to the cross bar and secure by tightening the thumb nut
to weld stud.
5.1 Screw cap to threaded post with aircraft cable.
5.2 Fix the aircraft cable into thumbnut, secure by tightening by hand.
4.1 4.2
5.1
5.2
plexineon fixture stand off hub
ceiling
junction box
waterproof
wire nuts
cross bar
canopy
power cord
strain relief
24VDC --
24VDC +
strain relief
screw
cross bar
canopy
ceiling
power cord
weld stud
weld stud
threaded
post
cap
aircraft
cable
power cord
thumb nut
thumb nut
NOTE: Prior to wiring the desired fixture height must be determind to cut off
any un-necessary wire.
Installation Instructions - Plexineon Suspended Static Color
Models: Plexineon Fixture Suspension Mount Static Color and Plexineon Rings Suspension Mount Static Color
Please read all instructions prior to installation and keep for future reference!
1. PRODUCT TO BE INSTALLED BY A QUALIFIED ELECTRICIAN.
2. USE ONLY WITH CLASS 2 POWER UNIT
3. 24 VOLTS DC
4. SUITABLE FOR WET LOCATIONS
5. SUSPENDED MOUNT ONLY
7777 Merrimac Ave
Niles, IL 60714
T 224.333.6033
F 224.757.7557
[email protected]
www.luminii.com
REV0.1
10252022
4 / 4
*LUMINII RESERVES THE RIGHTS TO CHANGE SPECIFICATION & INSTRUCTION WITHOUT NOTICE
6.1 Install the rest of other canopies by similar method.
6.2 If necessary, make any final adjustment to power cord using cable clip.
6
power cord
aircraft
cable
cable clip
plexineon fixture
powerfeed canopy
suspension kit with
single clip
suspension kit with
single clip
6.1
6.2
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

luminii Plexineon Suspended Static Color Installation guide

Plexineon Suspended Static Color
luminii
Brand
luminii
Model
Plexineon Suspended Static Color
Type
Installation guide
This manual is also suitable for

The luminii Plexineon Suspended Static Color is a versatile lighting solution designed to add a touch of elegance to any setting. Suitable for wet locations, it's ideal for both indoor and outdoor use. Installation requires a qualified electrician and should be mounted with a Class 2 power unit providing 24 volts DC. With its durable construction and customizable mounting options, this fixture offers a reliable and stylish lighting experience.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents