2. Schlage
  3. M400-Series M422 Standard Application

Schlage M400-Series M422 Standard Application Template

  • Hello! I've reviewed the Schlage M422 Door Template document. This template is specifically for dimensional verification of the M422 door hardware and not for creating additional templates, it should not be used by suppliers for printing templates. The document gives precise measurements for installation and emphasizes placement on the inside of the door to avoid drilling through.
  • Can this template be used for printing new templates?
    Should I drill through the door when using this template?
    Where should I place this template?
13.060” +/- .005”
2.470” +/- .060
from paper edge
12.060” +/- .005”
10.435” +/- .005”
13.685” +/- .005”
Paper
height
Paper
height
2.375”
± .060”
from paper
edge
THIS PAGE IS FOR DIMENSIONAL VERIFICATION ONLY
NOT TO BE USED FOR TEMPLATE PRINTING BY SUPPLIER
/