Stonegate Decorative Wood Bridge Owner's manual

FIGURE 1

Join the 2 Bridge Bases (A) together with the 3 Bottom Connecting Boards (F),

face inside, use 14 sets of small bolt, nut and washer (K) 12 sets for each end

of the 3 Connecting Boards (F) and 2 sets for center of middle Connecting Board.

Unpack all parts on a clean and soft surface to prevent scratching of wood.

Keep this wood product away from fire and sharp objects.

Solid wood such as this has knots and cracking which are normal and

which should be considered an enhancement to the natural beauty of

the product.

Cedar Bridge with Solar Lights Assembly Instructions

Model #: KMG10058-SL HOW TO ASSEMBLE

FIGURE 2

Attach the center plate (G) on the Connecting Part of 2 Bridge Bases (A)

with 6 pieces of screws (L) as shown.

FIGURE 3

Insert 4 pieces of Rail (E) into the Left Post (B). Middle Post (C)

and Right Post (D) as shown. Repeat for second hand rail.

FIGURE 4

Attach the Posts to the Bridge Base (A) together with 8 pieces of bolt, nut and

washer sets (I) and (J). Use 2 sets of large bolt, nut and washer (I) for each

center post and use 1 set of medium bolt, nut and washer (J) for each end

post. Secure the posts and rails to each other with 16 pieces of screws (L)

and tighten all of the bolts and screws.

MADE IN CHINA

FIGURE 5

Insert 6 Solar Lights (H) into the pre-drilled holes on post tops. Assembly

complete.