Poly CX500 User guide

Brand: Poly

Model: CX500

Category: Teleconferencing equipment

Type: User guide

Polycom

CX500 Lync

™

Edition

Phone

Quick User Guide

For use with Microsoft

Lync

™

We are striving to improve the quality of our documentation,

and we appreciate your feedback. Email your comments to

VoiceDocumentationFeedback@polycom.com.

Visit Polycom Support for software downloads, product

documents, product licenses, troubleshooting tips, service

requests, and more.

www.polycom.com | 3725-49108-001 Rev A | October 2013

the names and marks associated with Polycom's products are trademarks and/or

service marks of Polycom, Inc. and are registered and/or common law marks in

the United States and various other countries. All other trademarks are property

of their respective owners. No portion hereof may be reproduced or transmitted

in any form or by any means, for any purpose other than the recipient's personal

use, without the express written permission of Polycom.

About Your Phone

The Polycom CX500 Lync Phone Edition uses Voice over

Internet Protocol (VoIP) technology to provide many features not

available on a traditional phone.

Signing In to a CX500 Phone

You can sign in to any CX500 phone with your phone number or

extension and your PIN authentication.

To sign-in using your phone number and PIN:

1 In Desk Phone Setup, enter your phone number or

extension, as shown next, and select Next.

2 Enter your six-digit PIN number and select Sign in.

After you sign in, you can start making calls, searching the

Active Directory, and viewing local call logs.

Making Calls

You can make phone calls in the following ways:

 Pick up the handset and dialing a contact.

 Call a contact from the Contact screen.

 Call a contact by searching for a contact in the Active

Directory.

To call from the Contacts screen:

1 From Home, select the Contacts icon .

2 From the Contact Groups screen, select the group of a

contact.

3 Select a contact, and select Call, as shown next.

To call by searching for a contact in the Active Directory:

1 From Home, select the Search icon .

2 Enter your contact’s name or phone extension using the

phone’s keypad.

To enter a contact’s name, press the numbers on the key

pad that correspond to the letters in your contact’s name.

For example, press 8669*76484 to enter the name Tony

Smith using the star key (*) for the space between the first

and last name.

3 When you find your contact, select Call.

Answering and Holding Calls

You can respond to incoming calls by picking up the handset,

selecting Answer, or selecting To Voice Mail on the Incoming

Call screen, as shown below.

After you answer an incoming call, the call is active. You can

place multiple active calls on hold in the In Call screen.

To place an active call on hold:

» Select Hold, as shown next.

To switch between active and held calls:

» Press , select Active Call, select a held call, and

select Resume.

You can also make new calls during an active call.

To make a new call during an active call:

1 From the In Call screen, select Menu > New Call. The

active call is placed on hold.

2 Enter a phone number or select a contact and select Call.

Managing Conference Calls

You can add multiple participants to an active call to initiate a

conference call.

To initiate a conference call:

1 During an active call, select Menu > Add Others, as

shown next. The active call is placed on hold.

2 Enter a phone number or select a contact and select Add.

Checking Voicemail

If you have new voicemail messages, the number of messages

displays below the voicemail icon on the Home screen, as

shown next.

To check your voicemail:

1 On the Home page, select , or press and hold 1 on the

keypad.

2 Enter your PIN number to hear your messages.

Transferring Calls

You can transfer active calls directly to a contact. The following

are two methods for transferring calls:

 Transfer Directly To Transfer the call directly to a

contact without speaking to the contact first.

 Consult then Transfer To Speak with a contact before

transferring the call.

To transfer a call:

1 In the In Call screen, select Menu, and select a transfer

method. For example, select Transfer Directly To, as

shown next.

2 Depending on your transfer method, do the following:

 For Transfer Directly To, enter a phone number or

select a contact, and select Call.

 For Consult then Transfer To, enter a phone number

or select a contact, select Call, and select Complete

Transfer after you speak with the contact.

Viewing Local Call Logs

You can view a history of incoming, outgoing, and missed calls

on the Call Logs screen.

To view call logs:

1 From Home, select the Call Logs icon .

2 From the All Calls screen, select Menu and select the call

log you want to view. For example, select View Missed

Calls.

Poly CX500 User guide

Brand: Poly

Model: CX500

Category: Teleconferencing equipment

Type: User guide

Download PDF

report

Poly CX500 User guide

Poly CX500 User guide

Related papers

Other documents