TITLE GUITAR AMPLIFIER
MODEL PVAMP60
：
：
TITLE GUITAR AMPLIFIER
MODEL PVAMP60
：
：
USER MANUAL
www.pyleaudio.com
1. HIGH INPUT
Plug in a hi-level signal here.
2. LOW INPUT
Plug in a low-level signal here.
1. HIGH INPUT
Plug in a hi-level signal here.
2. LOW INPUT
Plug in a low-level signal here.
3. GAIN
This is the distortion intensity control
for the overdrive channel.
4. SELECT
This switch is select the drive channel or normal
channel.
5. TREBLE
This equalization control adjusts the amount of
boost in the high frequency range
6. MIDDLE
This equalization control adjusts the amount of
boost in the middle frequency range.
7. BASS
This equalization control adjusts the amount of
boost in the low frequency range.
8. LENGTH
This equalization control reverb length
9. DEPTH
This equalization control reverb depth
10. VOLUME
This is the overall level control for the
normal channel.
11. LINEOUT
This is a 1/4"jack for hooking up external
speakersto the amplifier.
12. PHONE
This is a 1/4"3-conductor stereo headphone jack
for plugging in headphones.
13. POWER
This on/off switch provides power the unit.
3. GAIN
This is the distortion intensity control
for the overdrive channel.
4. SELECT
This switch is select the drive channel or normal
channel.
5. TREBLE
This equalization control adjusts the amount of
boost in the high frequency range
6. MIDDLE
This equalization control adjusts the amount of
boost in the middle frequency range.
7. BASS
This equalization control adjusts the amount of
boost in the low frequency range.
8. LENGTH
This equalization control reverb length
9. DEPTH
This equalization control reverb depth
10. VOLUME
This is the overall level control for the
normal channel.
11. LINEOUT
This is a 1/4"jack for hooking up external
speakersto the amplifier.
12. PHONE
This is a 1/4"3-conductor stereo headphone jack
for plugging in headphones.
13. POWER
This on/off switch provides power the unit.
Functions
TECHNICAL SPECIFICATIONS
Power
~ 110 V, 60 Hz
Rated Power
60 Watts MAX
Load Impedance
8 Ohms
Speaker
8
Signal/Noise Ratio
70dB
Frequency Response
20HZ to 15KHZ
Dimension
15.75” x 8.27” x 13.58”
Weight
22 lbs.
CAUTION:
WARNING:
AVIS:
ATTENTION:
CHASSIS SURFACE HOT.
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK,DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
SUPERFICIE DE CHASSIS CHAUDE.
CAUTION:
WARNING:
AVIS:
ATTENTION:
CHASSIS SURFACE HOT.
TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK,DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR.
SUPERFICIE DE CHASSIS CHAUDE.
LINEOUT
PHONE
HIGH
INPUT
HIGH
INPUT
TREBLE
MIDDLE
BASS
DEPTH
POWER
PVAMP60
SELECT
GAIN
LENGTH
11
12
13
LOW
INPUT
LOW
INPUT
VOLUME
PVAMP60
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Kustom V50 User manual
-
-
Biamp 19 Series Mixing Console Models 119 and 619 User manual
-
-
Biamp 29 Series Operation User manual
-
-
Fender Twin Amp ('94 Twin, Evil Twin) User manual
-
Mesa Boogie Mark Five:35 Head Owner's manual
-
Rivera Knucklehead Reverb KR 100 T Owner's manual
-
Peavey Mace VT Series Owner's manual
