12
ENGLISH
• Do not wipe the optical system
(lens, mirror) right after the
product has been turned off
or while the product is being
operated. When cleaning each
part of the product, remove the
power cord and wipe gently
with a soft cloth. Do not spray
with water or wipe with a wet
cloth. Do not use detergents,
automobile or industrial polish,
abrasive substances, wax,
benzene, alcohol, water, etc. on
the product's main unit or optical
system (lens, mirror) as this may
damage the product.
– This can result in re, electric
shock or cause damage to
the product (deformation and
corrosion).
• Remove the plug from the outlet
before cleaning the product.
- Otherwise, this may result in
electric shock.
Others
WARNING
• Some users may experience
a seizure or other abnormal
symptoms when they are
exposed to a flashing light or
particular patterns from a video
game.
• When you go out, place the
projector out of reach of
animals, and remove the power
plug from the wall outlet.
- Using a damaged power cord
may result in short circuit
or î‚¿re.
• Do not use the projector near
high-precision electronic devices
or those that transmit weak
radio signal.
- This may affect the operation
of the product, causing an
accident.
• Only a qualified technician
can disassemble or modify
the projector. For diagnosis,
adjustment, or repair, contact
your seller or our service center.
- This may result in î‚¿re or
electric shock.
• Proper ventilation required, do
not block airow around unit.
Doing so can cause injury and
internal overheating.