Toro Exhaust Deflector Kit Installation guide

Hello! I am an AI chatbot trained to assist you with the Toro Exhaust Deflector Kit Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!

The Toro Company – 1995

Printed in USA

FORM NO. 3318–385

INSTALLATION

INSTRUCTIONS

PART NO. 94–6872

EXHAUST DEFLECTOR KIT

(For Lawn Tractors)

Loose Parts

Note: Use the chart below to identify parts for assembly.

DESCRIPTION QTY. USE

Exhaust Deflector 1 New installation.

Screw, Self Threading; 8–12 x 1/2” (13mm) 1 To attach exhaust deflector to exhaust pipe.

Procedure

Make sure exhaust pipe on tractor is cool to the

touch.

1. Mark hole location on tailpipe, 5/16” (8 mm)

from end of pipe on horizontal center line

(Fig. 1).

2. Center punch and drill a 1/8” (3 mm) hole into

tailpipe (Fig. 1).

3. Secure exhaust deflector to pipe with self

threading screw.











Figure 1

1. Exhaust Deflector

2. 5/16” (8 mm)

3. 1/8” (3 mm)

4. Self Threading Screw