MORLEY MDB Owner's manual

Thanks for buying the Morley® Distortion Boost

The Distortion Boost is an analog overdrive style distortion. It works

great as a standalone distortion but also to enhance your amp's

distortion.

The handy Boost feature allows you to boost the overall signal 20dB

(when in distortion mode) for solos or when ever you need to be

louder.

CONNECTIONS: The Distortion Boost powers from one 9V battery or

optional Morley Adapter (DC jack is located next to INPUT jack). Using

a standard guitar cable, simply plug guitar into INPUT jack, connect a

standard guitar cable from the OUTPUT jack to the Input of your

amplifier.

FUNCTIONS AND FEATURES: The right side switch turns on/off the

distortion. The LED will light when distortion is turned on. There are

three knobs that control distortion sound;

DRIVE: Controls distortion from mild overdrive to cranked amp

distortion.

TONE: Controls tone of distortion.

LEVEL: Controls the overall loudness of the distortion

The left side switch engages the BOOST. The boost only works when

you are in distortion mode. Left side LED lights when Boost is on. The

level of the boost is preset at 20dB. The Drive, Tone and Level knobs

still functional in Boost mode.

This product is warranted for two years from date of purchase with a

copy of your purchase receipt. To obtain warranty service, please

contact Morley® customer service at [email protected]om

Morley® Pedals 100 High Grove Blvd Glendale Heights, IL 60139

www.morleyebtech.com (800) 284-5172