Thunderbird Products, Inc. ALN24TG Installation guide

Type
Installation guide

This manual is also suitable for

tbirdusa.com
tel: (619) 448-3567
Data is subject to manufacturing tolerances.
fax: (619) 448-9072
1895 Gillespie Way, El Cajon, CA 92020
LINEAR DRAIN INSTALLATION
height adjuster
subfloor
and grate or tile tray
hardware
drain flange
mortar
clamping ring
thinset / mortar
waterproofing
drain body
Thunderbird Products linear channel
tile (sloped)
Step 1: Set drain into pre-cut or formed opening
and attach coupling to drain pipe.
Step 2: Nail or mechanically attach drain flange to floor.
Step 3: Apply waterproofing over floor and drain flange.
Step 4: Mechanically attach clamping ring to drain
with supplied hardware.
Step 5: Hand thread plastic height adjuster into drain opening.
Step 6: Place linear drain outlet into plastic adjuster and hand
thread adjuster to your desired finished height.
Step 7: Apply mortar under and around linear channel.
Use caution to avoid mortar entering weep holes.
Make sure there is enough room to allow tile to finish
flush with top of linear grate.
Step 8: Install tile to finished height. Make sure it is sloped
toward linear channel.
  • Page 1 1

Thunderbird Products, Inc. ALN24TG Installation guide

Type
Installation guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI