Troy-Bilt 13AN77KG211 Fast Start Guide

Type
Fast Start Guide

This manual is also suitable for

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Lea el manual de operación anexo sobre ensamblaje e inicio.
Place PTO (Blade Engage) Lever in
Off position.
Move Throttle to Choke position.
Move
Throttle to
Fast (rabbit)
position.
Insert key and turn to Start position.
Release after engine starts.
Place Shift Lever in N (neutral)
position.
Fully depress the Brake Pedal.
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
778-11683
© 2008 13AN77KG
Stopping the Unit
Didn’t Start?
Place PTO (blade engage)
lever in the Off position.
Turn key counterclockwise to
Stop position and remove key.
Depress brake pedal. Move
Speed Control Lever/Parking
Brake to P (park brake) position.
Place shift lever in N
(neutral) position.
PTO (Blade
Engage) Lever
Shift
Lever
Throttle
Ignition
Switch
Brake
Pedal
Speed Control/
Parking Brake
1
2
3
4
5
6
1
2
3
4
Is the battery connected? Fresh gas in the unit?
Refer to Operator’s Manual for troubleshooting tips.
  • Page 1 1

Troy-Bilt 13AN77KG211 Fast Start Guide

Type
Fast Start Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI