GE TM2010CCU2K Specification

GE
Brand
GE
Model
TM2010CCU2K
Type
Specification

GE TM2010CCU2K is a 100 Amp, 20/40 Circuit, Single Phase, Three Wire, 120/240 VAC, 22 kAIC Rated load center. Suitable for use as Service Entrance Equipment when installed in accordance with the National Electric Code. The main breaker can be upgraded to a THQMVXXXD circuit breaker from the BuyLog page. It has a combination front type feed and can be installed flush or on the surface. The equipment ground kit must be ordered separately (TGK24). The box dimensions are 14 inches in width, 23 inches in height, and 3 3/4 inches in depth. The GE TM2010CCU2K is UL Listed (Panelboards No.

GE TM2010CCU2K is a 100 Amp, 20/40 Circuit, Single Phase, Three Wire, 120/240 VAC, 22 kAIC Rated load center. Suitable for use as Service Entrance Equipment when installed in accordance with the National Electric Code. The main breaker can be upgraded to a THQMVXXXD circuit breaker from the BuyLog page. It has a combination front type feed and can be installed flush or on the surface. The equipment ground kit must be ordered separately (TGK24). The box dimensions are 14 inches in width, 23 inches in height, and 3 3/4 inches in depth. The GE TM2010CCU2K is UL Listed (Panelboards No.

GE
Industrial Solutions
PowerMark Gold
*
Load Centers
100 - 200 Amp, 20/40 Circuit
• Single Phase, Three Wire, 120/240 VAC, 22 kAIC Rated
• UL Listed (Panelboards No. 67)
• 60°C/75°C Conductor Rating
• Suitable for use as Service Entrance Equipment when
installed in accordance with the National Electric Code
Technical Data
Main
Ampere
Rating
1 Pole 2 Pole 1 Pole 2 Pole
Total
1 Pole
Spaces
Main Style Catalog # Front Type Feed
Main Wire Size
(AWG/kcmil)
Cu-Al
Equipment
Ground Kit
Box
#
1" Spaces 1/2" Spaces
100 20 10 — — 20 Main Breaker TM2010CCU
Combination
Flush/Surface
Top
Bottom
4-1/0 TGK24 (order separately) 6
200
18 10 40 18 40 Main Breaker
TM2020CCU
Combination
Flush/Surface
Top
Bottom
1-250 (Cu),
2/0-250 (Al)
TGK32 (order separately)
8
TM2020CCUW
White Combo
Flush/Surface
T G K 2 4 ( o r d e r s e p a r a t e l y )
TGK42 (order separately)
TM2020CCUG
Combination
Flush/Surface
TGK32 (order separately)
TM2020CCUGW
White Combo
Flush/Surface
TGK32 (order separately)
20 10 40 18 40
Main Breaker TM2020RCU Top
1-250 (Cu),
2/0-250 (Al)
T G K 2 4 ( o r d e r s e p a r a t e l y )
TGK42 (order separately)
R6
Main Lug /
Combination
TLM2020CCU
1
Combination
Flush/Surface
Top
Bottom
6-250
TGK32 (order separately)
8TLM2020CCUW
1,2
White Combo
Flush/Surface
TGK32 (order separately)
TLM2020CCUG
1
Combination
Flush/Surface
TGK42 (installed)
TLM2020RCU
1
Top 6-250
T G K 2 4 ( o r d e r s e p a r a t e l y )
TGK42 (order separately
R6A
1
For main breaker, order THQMVXXXD circuit breaker from BuyLog page 1-6.
2
Minimum order quantity is 40 for below 24 circuits; Minimum order quantity is 24 for 24 circuits and above. (See DEE-590).
GE
Industrial Solutions
41 Woodford Avenue
Plainville, CT 06062
www.geindustrial.com
Dimensions (inches)
Box Width Height Depth
6 14 23 3 3/4
8 14 26 7/16 3 3/4
R6 14 35 3/17 4 5/8
R6A 13 33 5
Breaker
Symbol
Breaker Fill
1" THQL 1/2" THQP
1 —
1 2
Terminal
Symbol
Wire Range (AWG/kcmil)
Cu Al
C
6-2/0 6-2/0
E
1-300 1-300
W
D
H
D
H
W
TM2010CCU, TM2010RCCU
TLM2020CCUTM2020CCU TM2020RCU TLM2020RCU
Box R6 and R6ABox 6 and 8
TM2020CCU, TM2020RCU,
TLM2020CCU, TLM2020RCU
© 2015 General Electric Company
* Indicates a trademark of the General Electric Company and/or its subsidiaries.
Information provided is subject to change without notice. Please verify all details with GE. All values are design or typical values when measured under
laboratory conditions, and GE makes no warranty or guarantee, express or implied, that such performance will be obtained under end-use conditions.
DET-854 1115
MAIN
C
MAIN
EC
  • Page 1 1

GE TM2010CCU2K Specification

GE
Brand
GE
Model
TM2010CCU2K
Type
Specification

GE TM2010CCU2K is a 100 Amp, 20/40 Circuit, Single Phase, Three Wire, 120/240 VAC, 22 kAIC Rated load center. Suitable for use as Service Entrance Equipment when installed in accordance with the National Electric Code. The main breaker can be upgraded to a THQMVXXXD circuit breaker from the BuyLog page. It has a combination front type feed and can be installed flush or on the surface. The equipment ground kit must be ordered separately (TGK24). The box dimensions are 14 inches in width, 23 inches in height, and 3 3/4 inches in depth. The GE TM2010CCU2K is UL Listed (Panelboards No.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents