Samsung PN58B850Y1F User manual

English - 2

I

N

T

E

R

N

E

T

@

*

Quick Setup Guide

(BN68-02135A)

Remote Control/

AAA Batteries (2ea)

Holder-Wire stand

(BN61-05491A)

Warranty Card/Safety Guide Manual/

(Not available in all locations)

*

Holder-Wire (3ea)

(BN61-05373A)

Holder-Ring (4ea) Program-CD Cloth-Clean

TV-Holder & Screw

(BN96-10788A)

Holder-Wire Cable Cover-Bottom

(PN50B850Y1F/PN50B860Y2F only)

Cover-Bottom & Screw

(PN58B850Y1F/PN58B860Y2F only)

Screws (5ea) (PN50B850Y1F/

PN50B860Y2F Only

Ferrite Core

(3301-001201)

(PN58B850Y1F/PN58B860Y2F only)

Ferrite Core (7ea)

(3301-001305)

The Supplied Accessories

Installing Batteries in the Remote Control

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

www.samsung.com/register.

QUICK SETUP GUIDE

PDP TV

BN68-02273A.indb 2 2009-04-07 오후 2:52:19

English - 3

2. Using the 5 screws for securing the stand base and the TV, firmly attach the TV to the stand

base.

Stand the product up and fasten the screws. If you fasten the screws with the PDP TV

placed down, it may lean to one side.

N

1. InstalltheWallMountwithatorquerangeof15kgf·cmorless.Usecareasthepartscanbedamagedifthetorqueisoutofthespecied

range.

2. Accessory Kit contains Holder–Ring [2] for installing another company’s Wall-Mount on a Samsung TV.. (Case B) Screw down the hole

[1] when installing wall-mount on the wall.

Case A. Installing the SAMSUNG Wall-Mount Case B. Installing another company’s Wall-Mount

3. When installing your TV on a wall, close the cover 1 on the stand-base connection using

one screws.

Preparing before installing Wall-Mount

Installing the Stand

Warning

Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury.

1. Attach your PDP TV to the stand.

Two ormorepeopleshouldcarrytheTV.NeverlaytheTVontheoorbecauseofpossible

damage to the screen. Always store the TV upright.

The product color and shape may vary depending on the model.

N

1

BN68-02273A.indb 3 2009-04-07 오후 2:52:20

English - 4

Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand.

The product color and shape may vary depending on the model.

Stand Type

Enclose the cables in the Holder-Wire Cable so that the cables are not visible through the transparent stand.

Wall-Mount Type

N

❑

N

❑

Assembling the Cables

1

2

1

3

2

1

3

2

1

2

1

2

1

3

2

1

3

2

1

2

1 Holder-Wire

2 Holder-Wire stand

3 Holder-Wire cable

12 Holder-Wire

BN68-02273A.indb 4 2009-04-07 오후 2:52:23

English - 5

Viewing the Menus

Before using the TV, follow the steps below to learn how to navigate the menu in order to select and adjust different functions.

Operating the OSD (On Screen Display)

The access step may differ depending on the selected menu.

1. Press the MENU button.

2. The main menu appears on the screen. The menu’s left side has icons : Picture, Sound,

Channel, Setup, Input, Application, Support.

3. Pressthe▲or▼buttontoselectoneoftheicons.

4. Then press the ENTER

E

button to access the icon’s sub-menu.

5. Pressthe▲or▼buttontomovetoitemsinthemenu.

Press the ENTER

E

button to enter items in the menu.

6. Pressthe◄or►buttontodecreaseorincreasethevalueofaparticularitem.Theadjustment

OSD may differ depending on the selected menu.

7. Press the ENTER

E

buttontocompletetheconguration.

8. Press the EXIT button to exit.

❑

INTERNE

T

@

INTERNE

T

@

IN

T

ERN

E

T

@

Brightness

45

Enter

Return

Adjust

Move

▲

▼

MENU Button

Display the main on-screen menu.

▲/▼/◄/►/ENTERE Button

Move the cursor and select an item.

Select the currently selected item.

Confirm the setting.

RETURN Button

Return to the previous menu.

EXIT

Exit the on-screen menu.

Mode :Standard

CellLight :4

Contrast :95

Brightness :45

Sharpness :50

Color :50

Tint(G/R) :G50/R50

AdvancedSettings

Picture

Brightness :45   



Sharpness :50

Color :50

Tint(G/R) :G50/R50

AdvancedSettings

PictureOptions

PictureReset

Picture

CellLight :4

Contrast :95

BN68-02273A.indb 5 2009-04-07 오후 2:52:25

English - 6

Plug & Play

When the TV is initially powered on, basic settings proceed automatically and

subsequently.

Connecting the power cord and antenna.

The Screen Saver is activated if there is no remote control button input for longer than 1 minute

while Plug & Play is running.

The Screen Saver is activated if there is no operating signal for longer than 15 minutes.

1. Press the POWER button on the remote control. Select Language of the OSD. menu is

automatically displayed. Press the ENTER

E

button. Select the appropriate language by

pressingthe▲or▼button.PresstheENTER

E

buttontoconrmyourchoice.

2. Pressthe◄or►buttontoselectStoreDemo or Home Use, then the ENTER

E

button.

We recommend setting the TV to Home Use mode for the best picture in your home

environment.

Store Demo mode is only intended for use in retail environments.

If you want to change the Store Demo or Home use : Press the Volume button on the

TV. When the volume OSD is displayed, press and hold the MENU button on the TV for 5 seconds..

3. Pressthe▲or▼buttontoselecttheAntennasourcetomemorize.PresstheENTER

E

button to select Start.

Air: Air antenna signal.

Cable: Cable antenna signal.

Auto: Air and Cable antenna signals.

In Cable mode, you can select the correct analog signal source among STD, HRC, and IRCbypressingthe◄or►button,then

press the ENTERE button. If you have Digital cable, select the signal source for both Analog and Digital. Contact your local cable

company to identify the type of cable system that exists in your particular area.

4. TheTVwillbeginmemorizingalloftheavailablechannels.

Tostopthesearchbeforeithasnished,presstheENTERE button with Stop selected.

After all the available channels are stored, the TV starts to remove scrambled channels. The Auto program menu then reappears.

Press the ENTEREbuttonwhenchannelmemorizationiscomplete.

5. The message Set the Clock Mode. is displayed. Press the ENTER

E

button.

Setting the Clock Automatically.

6. Pressthe▲or▼buttontoselectAuto, then press the ENTER

E

button.The message Set to daylight saving time. is displayed.

7. Press the ENTER

E

button,thenpressthe▲or▼buttontoselectOff, On, or Auto, then the ENTER

E

button. The message Select

the time zone in which you live. is displayed. Select the your local area.

Setting the Clock Manually.

6. Pressthe▲or▼buttontoselectManual for setting the current time manually, then press the ENTERE button.

7. Pressthe▲or▼buttontomovetoMonth, Day, Year, Hour, Minute, or am/pm.Setthedateandtimeyouwantbypressingthe▲or

▼button,thenpresstheENTERE button.

8. The brief instruction on How to get the best performance from your new HDTVisdisplayed,whichexplainsthebestczonnection

method for HD devices.

Youcanchangetothepreviousornextpagebypressingthe◄or►button.

9. The message Enjoy your TV. is displayed

If you want to view the TV immediately, select the Watch TV.

If you want to view the See Product Guide, press the ENTERE button.

N

•

N

Continued...

INTERNE

T

@

Plug&Play

SelectLanguageoftheOSD.

MenuLanguage :

U MoveEEnter

English

Español

Français

BN68-02273A.indb 6 2009-04-07 오후 2:52:25

English - 7

To Select the Source

Press the SOURCE button on the Remote Control to select the TV mode or an input source connected to the TV set. Use this button to

choose an input source that you would like to watch.

TV, AV, Component, PC, HDMI1/DVI, HDMI2, HDMI3, HDMI4, USB.

For more information, refer to the E-manual.

N

Setting the Screen Size

Ifyouwanttochangethesizeoftheimageonyourscreen.PresstheMENUbuttontodisplaythemenu.Youcansetthepicturesizeby

selecting Picture→Picture Options →Size.Pressthe▲or▼buttontoselectthescreenformatyouwant.(16:9/Zoom1/Zoom2/Wide

Fit / 4:3 / Just Scan)

Alternately, you can press the P.SIZEbuttonontheremotecontrolrepeatedlytochangethepicturesize.

O

If you want to reset this feature...

1. Press the MENU button to display the menu.

Pressthe▲or▼buttontoselectSetup, then press the ENTER

E

button.

2. Press the ENTER

E

button again to select Plug & Play.

The Plug & Play feature is only available in the TV mode.

❑

N

Plug&Play

SelectLanguageoftheOSD.

MenuLanguage

:

U MoveEEnter

English

Español

Français

INT

E

RNE

T

***

]pq}p~s

T

*_zzw~

^z}np*Wt~

_a

[N* E*8*8*8*8

La E*8*8*8*8

Nzx{zypy E*8*8*8*8

SOXT<:OaT E*8*8*8*8

SOXT= E*8*8*8*8

PictureOptions

ColorTone :Normal

Size :16:9 ▶

DigitalNR :Auto

HDMIBlackLevel :Normal

1080FullHDMotionDemo :Off

FilmMode :Off

BlueOnlyMode :Off

U Move EEnter RReturn

INT

E

RNE

T

BN68-02273A.indb 7 2009-04-07 오후 2:52:26

English - 8

Problem Solution

No sound or picture

Check that the power cord has been connected to a wall socket.

Check that you have pressed the button on your set.

Check the picture contrast and brightness settings.

Check the volume.

Normal picture but no sound

Check the volume.

Check whether the MUTEM button has been pressed on the remote control.

Check the Speaker Select settings.

Troubleshooting

A/B Switch Viewing channels

A Normal

B Scrambled

Connecting an Antenna

When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s output channel, which is usually channel 3 or 4.

ANT IN

UHF

VHF

Splitter

wall

RF (A/B)

Switch

Cable Box

TV

Wall (Cable Box)

Air (ANT)

300Ω

75Ω

VHF/UHF

BN68-02273A.indb 8 2009-04-07 오후 2:52:27

English - 9

A/B Switch Viewing channels

A Normal

B Scrambled

Connecting a AV device

/

The product color and shape may vary depending on the model.

N

AUDIO OUT

DVI OUT

HDMI OUT

AUDIO OUT

VIDEO OUT COMPONENT OUT

HDMI OUT

W R

R W

RB

R B

G

Y

W R

R W

AUDIO OUT

DVI OUT

HDMI OUT

AUDIO OUT

VIDEO OUT COMPONENT OUT

HDMI OUT

W R

R W

RB

R B

G

Y

W R

R W

AUDIO OUT

DVI OUT

HDMI OUT

AUDIO OUT

VIDEO OUT COMPONENT OUT

HDMI OUT

W R

R W

RB

R B

G

Y

W R

R W

AUDIO OUT

DVI OUT

HDMI OUT

AUDIO OUT

VIDEO OUT COMPONENT OUT

HDMI OUT

W R

R W

RB

R B

G

Y

W R

R W

AUDIO OUT

DVI OUT

HDMI OUT

AUDIO OUT

VIDEO OUT COMPONENT OUT

HDMI OUT

W R

R W

RB

R B

G

Y

W R

R W

AUDIO OUT

DVI OUT

HDMI OUT

AUDIO OUT

VIDEO OUT COMPONENT OUT

HDMI OUT

W R

R W

RB

R B

G

Y

W R

R W

AUDIO OUT

HDMI/DVI

PC/COMPONENT

VIDEO

Best

Normal

Component connection

Using a Component Cable

DVD / Blu-Ray player / Cable Box /

Satellite receiver

Using a DVI Cable

DVD / Blu-Ray player / HD Cable

Box / HD Satellite receiver (STB)

HD connection

Using an HDMI Cable

DVD / Blu-Ray player / Cable Box

/ Satellite receiver (STB)

HD connection

Using an Audio/Video Cable

VCR

Audio/Video connection

BN68-02273A.indb 9 2009-04-07 오후 2:52:29

English - 10

Connecting an audio device

Connecting a PC

The product color and shape may vary depending on the model.

N

The product color and shape may vary depending on the model.

N

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

CABLE

VHF/UHF Antenna

ANT OUT

or

RW

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

CABLE

VHF/UHF Antenna

ANT OUT

or

R

W

OPTICAL

AUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

W R

R W

RB

R B

G

Y

W R

W

OPTICAL

(Digital)

AUDIO

(Analog)

Best

Normal

Using an Optical Cable

Digital Audio connection

Digital Audio System

Using an Audio Cable

Amplifier / DVD Home Theater

Analog Audio connection

HD connection

Using an PC Cable

HD connection

Using an HDMI Cable

Using an DVI Cable

BN68-02273A.indb 10 2009-04-07 오후 2:52:32

Page is loading ...

Español - 10

Conexión de un dispositivo de audio

Conexión a un PC

El color y la forma del producto pueden variar según el modelo.

N

El color y la forma del producto pueden variar según el modelo.

N

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

CABLE

VHF/UHF Antenna

ANT OUT

or

RW

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

CABLE

VHF/UHF Antenna

ANT OUT

or

R

W

OPTICAL

AUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

W R

R W

RB

R B

G

Y

W R

W

OPTICAL

(Digital)

AUDIO

(Analógico)

Óptima

Normal

Mediante un cable óptico

Conexión de Audio Digital

Sistema de audio digital

Mediante un cable de audio

Amplificador/DVD para Home

Cinema

Conexión de Audio Analógico

Conexión HD

Uso de un cable HDMI

Uso de un cable DVI

Uso de un cable PC

BN68-02273A.indb 10 2009-04-07 오후 2:52:49

Page is loading ...

Français - 10

Branchement d’un appareil audio

Branchement d’un ordinateur

La couleur et la forme du produit peuvent varier en fonction du modèle.

N

La couleur et la forme du produit peuvent varier en fonction du modèle.

N

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

W R

R W

RB

R B

G

Y

W R

W

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

CABLE

VHF/UHF Antenna

ANT OUT

or

RW

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

CABLE

VHF/UHF Antenna

ANT OUT

or

R

W

OPTICAL

AUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTICALAUDIO IN

Using a D-Sub Cable

PC OUT

Using a D-Sub Cable

HDMI OUT

DVI OUT

AUDIO OUT

OPTIQUE

(numérique)

AUDIO

(analogique)

Optimal

Normal

À l’aide d’un câble optique

Branchement audionumérique

Système audionumérique

À l’aide d’un câble audio

Amplificateur, chaîne de cinéma

maison ou lecteur DVD

Branchement

audio analogique

Branchement

HD

À l’aide d’un câble DVI

Branchement

HD

À l’aide d’un câble HDMI

À l’aide d’un câble PC

BN68-02273A.indb 10 2009-04-07 오후 2:53:05

Branchement

audio analogique

BN68-02273A-00

Contact SAMSUNG WORLD-WIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Comment contacter Samsung dans le monde

Si vous avez des suggestions ou des questions concernant les produits Samsung,

veuillez contacter le Service Consommateurs Samsung.

Country

Customer Care Center 

Web Site Address

U.S.A 1-800-SAMSUNG(726-7864) www.samsung.com/us

Samsung Electronics America, Inc. 105 Challenger Road

Ridgefield Park, NJ 07660-0511

CANADA 1-800-SAMSUNG(726-7864) www.samsung.com/ca

Samsung Electronics Canada Inc., Customer Service 55

Standish Court Mississauga, Ontario L5R 4B2 Canada

Samsung Electronique Canada Inc., Service à la Clientèle

55 Standish Court Mississauga, Ontario L5R 4B2

Canada

BN68-02273A

BN68-02273A.indb 11 2009-04-07 오후 2:53:06

Samsung PN58B850Y1F User manual

Samsung PN58B850Y1F User manual

in other languages

Related papers

Other documents