®
®
Shure Incorporated
222 Hartrey Avenue, Evanston, Illinois U.S.A. 60202-3696
Phone: 800-25-SHURE Fax: 847-866-2279
In Europe, Phone: 49-7131-72140 Fax: 49-7131-721414
Outside of U.S. and Europe, Phone: 847-866-2200 Fax: 847-866-2585
www.shure.com
USER’S
GUIDE
ACCESS
performance microphones
®
®
PERFORMANCE WITHOUT LIMITS.
27D3074 (AC)
1
AXS 1 UNIDIRECTIONAL DYNAMIC MICROPHONE
The AXS 1 is a multi–purpose dynamic microphone designed to per-
form in a variety of acoustically demanding environments. Its cardioid
pickup pattern helps control feedback, rejects unwanted sound, and
provides increased on-axis sensitivity. Its neodymium magnet pro-
vides a high output level and increased signal-to-noise rato.
A superior shock mount system, a dent-resistant steel mesh grille,
and a sturdy die-cast handle. A built-in pop filter protects against ex-
cessive breath noise.
SPECIFICATIONS
Type: Dynamic
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
(Figure 1)
Frequency Response: 80 to 15,000 Hz (Figure 1)
Impedance (at 1 kHz): 260 Ω (actual)
Output Level (at 1 kHz): – 55.5 dBV/Pa ( 1.7 mV) open circuit
voltage*
*1 Pa = 94 dB SPL
Polarity: Positive pressure on diaphragm produces positive volt-
age on pin 2 relative to pin 3 of the microphone output connector
Operating Temperature Range: –7° to 49° C (20° to 120° F),t
at 0 to 95% relative humidity.
Switch: Built-in On/Off switch
Connector: 3-pin male XLR connector
Case: Die-cast zinc
Dimensions: 160 mm L x 56 mm W (6.3” x 2.2”)
Net Weight: 317.5g (11.2 oz)
FURNISHED ACCESSORIES
Break-Resistant Swivel Adapter A25D. . . . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
7.6 m (25 ft) Cable (XLR to XLR) C25J. . . . . . . . . . . . . . . . . . . . . . .
Page is loading ...
3
AXS 2 DYNAMIC MICROPHONE
The Shure AXS 2 is multi-purpose dynamic microphone designed for
use in a variety of sound reinforcement and recording applications,
including close-up vocals, instrument pickup, and public address.
The AXS 2 features a smooth frequency response Its cardioid pickup
pattern ensures high gain before feedback and excellent isolation
from unwanted sound sources. A neodymium magnet provides high
output level and an increased signal-to-noise ratio.
A superior shock mount system, a dent-resistant steel mesh grille,
and a sturdy die-cast handle.
SPECIFICATIONS
Type: Dynamic
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
(Figure 2)
Frequency Response: 85 to 14,000 Hz (Figure 2)
Output Impedance: Rated at 150 Ω (180 Ω actual) for microphone
inputs rated from 75 to 300 Ω
Output Level (at 1 kHz): – 56.5 dBV/Pa ( 1.5 mV), open circuit
voltage:*
*1 Pa = 94 dB SPL
Polarity: Positive pressure on diaphragm produces positive volt-
age on pin 2 relative to pin 3 of the microphone output connector
Operating Temperature Range: –29° to 57° C (–20° to 135° F), 0 to
95% relative humidity.
Switch: Built-in On/Off switch
Connector: 3-pin male XLR connector
Case: Die cast zinc handle, black matte finish, dent-resistant steel
mesh ball grille
Dimensions: 163 mm L x 56 mm H (6.4” L x 2.2” W)
Net Weight: 289 g (10.2 oz)
FURNISHED ACCESSORIES
Break-Resistant Swivel Adapter A25D. . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
Shock Stopper
TM
Isolation Mount A55M. . . . . . . . . . . . . . . . . . .
Windscreen (7 colors available) A58WS Series. . . . . . . . . . . . .
7.6 m (25 ft.) Cable (XLR to XLR) C25J. . . . . . . . . . . . . . . . . . .
Page is loading ...
5
AXS 3 DYNAMIC MICROPHONE
The AXS 3 is a dynamic vocal microphone designed for sound rein-
forcement and project studio recording applications.
Its smooth frequency response is tailored for vocals. The cardioid po-
lar pattern remains uniform throughout its frequency range, ensuring
high gain before feedback, maximum rejection of unwanted sound,
and minimum off-axis sound coloration. A neodymium magnet pro-
vides high output level and high signal-to-noise ratio.
A steel mesh ball grille, die-cast handle, and proven shock mount sys-
tem ensure reliable performance, even in the roughest environments.
SPECIFICATIONS
Type: Dynamic
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
(Figure 3)
Frequency Response: 80 to 15,000 Hz (Figure 3)
Output Impedance:Rated at150 Ω (290 Ω actual) for microphone
inputs rated at 75 to 300 Ω
Output Level (at 1 kHz): –54.0 dBV/Pa ( 2.00 mV), open circuit
voltage*
*1 Pa = 94 dB SPL
Polarity: Positive pressure on diaphragm produces positive volt-
age on pin 2 relative to pin 3 of the microphone output connector
Operating Temperature Range: –29° to 57° C (–20° to 135° F), at
0 to 95% relative humidity.
Switch: Built-in On/Off switch
Connector: 3-pin male XLR connector designed to mate with Can-
non XL series, Switchcraft A3 (Q.G.) series, or equivalent
Case: Die cast zinc handle, black matte finish, dent-resistant ta-
pered grille
Dimensions: 179 mm L x 50 mm W (7.1” L x 2.0” W)
Net Weight: 298 g (10.5 oz)
FURNISHED ACCESSORIES
Storage Bag 26A13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Break-Resistant Swivel Adapter A25D. . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
Shock Stopper
TM
Isolation Mount A55M. . . . . . . . . . . . . . . . . . .
Windscreen (7 colors available) A58WS Series. . . . . . . . . . . . .
7.6 m (25 ft) Cable (XLR to XLR) C25J. . . . . . . . . . . . . . . . . . . .
Page is loading ...
7
AXS 4 CONDENSER MICROPHONE
The AXS 4 is a professional quality condenser microphone suitable for
sound reinforcement and studio recording of acoustic guitar, drums,
stringed instruments, and vocals (when mounted on a stand).
The AXS 4 has a wide frequency response for natural sound repro-
duction. It maintains a cardioid polar pattern throughout its frequency
range, which ensures high gain before feedback and maximum isola-
tion from unwanted sound sources. Its high sensitivity and low self–
noise make it ideal for producing quality demo tapes.
Operating voltage is supplied by phantom power or an AA battery.
SPECIFICATIONS
Type: Condenser (electret bias)
Polar Pattern: Cardioid (unidirectional), symmetrical about axis.
(Figure 4)
Frequency Response: 40 to 18,000 Hz (Figure 4)
Output Impedance: 600 Ω
Recommended Input Load Impedance: 800 Ω minimum
Output Level (at 1 kHz):–48.0 dBV/Pa (4.00 mV) open circuit voltage*
*1 Pa = 94 dB SPL
Maximum SPL: 131 dB (phantom), 127 dB (battery), 2000 Ω load
129 dB (phantom), 126 dB (battery), 800 Ω load
Output Noise: 20 dB typical, A weighted; 24 dB typical, weighted per
DIN 45 405
Dynamic Range: 111 dB (phantom); 107 dB (battery), at maximum
SPL, 2 kΩ load, to A-weighted noise level
Polarity: Positive pressure on diaphragm produces positive voltage
on pin 2 relative to pin 3 of microphone output connector
Phantom Power: 11 to 52 Vdc; reverse polarity protected to 100 Vdc
Current Drain: 2.0 mA max at 52 Vdc
Battery Power: 1.5 V alkaline AA size (NEDA 15A) recommended
Typical Battery Life: Up to 10,000 hours
Operating Temperature Range: –29° to 57° C (–20° to 135° F), at 0
to 95% relative humidity.
Switch: Built-in On/Off switch
Connector: 3-pin male XLR connector
Case: Steel and brass construction with black painted finish
Dimensions: 191 mm L x 27.9 mm H (7.5” L x 1.1” W)
Net Weight: 250 g (8.8 oz), less battery
FURNISHED ACCESSORIES
Swivel Adapter A25D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage Bag 26A13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
Phantom Power Supply PS1A. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windscreen A3WS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.6 m (25 ft.) Cable C25J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page is loading ...
9
AXS 5 CONDENSER MICROPHONE
The AXS 5 is a professional-quality vocal microphone suitable for stu-
dio recording, lead vocal sound reinforcement, and high-profile public
address.
The AXS 5 frequency response is optimized for vocals. The micro-
phone maintains a cardioid polar pattern throughout its frequency
range, ensuring high gain before feedback, maximum rejection of un-
wanted sound, and minimum off-axis sound coloration. Its high sensi-
tivity and low self-noise make it an ideal choice for producing quality
demo tapes.
Operating voltage is supplied either by phantom power or an internal
AA battery.
SPECIFICATIONS
Type: Condenser (electret bias)
Polar Pattern: Cardioid (unidirectional), symmetrical about axis.
(Figure 5)
Frequency Response: 70 to 16,000 Hz (Figure 5)
Output Impedance: 600 Ω
Recommended Load Impedance: 800 Ω minimum
Output Level (at 1,000 Hz): –49.0 dBV/Pa (3.55 mV) open circuit
voltage*
*1 Pa = 94 dB SPL
Maximum SPL: 32 dB (phantom), 128 dB (battery) at 2,000 Ω load;
130 dB (phantom), 127 dB (battery) at 800 Ω load
Output Noise: 21 dB typical, A weighted; 25 dB typical, weighted per
DIN 45 405
Dynamic Range: 111 dB (phantom), 107 dB (battery) at maximum
SPL, 2 kΩ load, to A-weighted noise level
Polarity: Positive pressure on diaphragm produces positive voltage
on pin 2 relative to pin 3 of microphone output connector
Power: 11 to 52 Vdc phantom, reverse polarity protected to 100 Vdc
Current Drain: 2.0 mA max at 52 Vdc
Battery: 1.5 V alkaline AA (NEDA 15A); up to10,000 hours of op-
eration
Operating Temperature: –29° to 57° C (–20° to 135° F) at 0 to 95%
relative humidity
Switch: Built-in On/Off switch
Connector: 3-pin XLR connector
Case: Steel and aluminum construction with black finish
Dimensions: 213 mm L x 52.4 mm W (8.4” L x 2.1” W)
Net Weight: 255 g (9 oz), less battery
FURNISHED ACCESSORIES
Swivel Adapter A25D. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage Bag 26A16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
Phantom Power Supply PS1A. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Windscreen A85WS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.6 m (25 ft.) Cable C25J. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page is loading ...
11
AXS 6 DYNAMIC INSTRUMENT MICROPHONE
The AXS 6 is a high output dynamic microphone designed for profes-
sional sound reinforcement and studio recording. Typical applications
include close miking of tom-toms and other percussion instruments,
as well as guitar amplifiers, brass instruments, and woodwinds.
The AXS 6 features a smooth, extended frequency response that is
ideal for a wide variety of instruments. Its cardioid pickup pattern is
consistent throughout its frequency range, ensuring high gain before
feedback, maximum rejection of unwanted sound, and minimum off-
axis sound coloration. A neodymium magnet provides higher output
and a greater signal-to-noise ratio.
A steel mesh grille, die-cast handle, and superior shock mount system
allow it to maintain its high performance through even the roughest en-
vironments. A built-in, locking stand adapter allows easy positioning
and installation.
SPECIFICATIONS
Type: Dynamic
Polar Pattern: Cardioid (unidirectional), symmetrical about axis
(Figure 6)
Frequency Response: 80 to 15,000 Hz (Figure 6)
Output Impedance: 150 Ω rated (290 Ω actual)
Output Level (at 1,000 Hz): –54.0 dBV/Pa (2.00 mV) open circuit
voltage*
*0 dB = 1 V/µbar
Polarity: Positive pressure on diaphragm produces positive voltage
on pin 2 relative to pin 3 of microphone output connector
Operating Temperature Range: –29° to 57° C (–20° to 135° F), at
0 to 95% relative humidity.
Connector: 3-pin professional audio (XLR)
Case: Die cast zinc, black paint finish, tapered grille
Stand Adapter: Built-in, locking, 180 swivel,
5
/
8
–27 thread
Dimensions: 105 mm L x 49.5 mm W (4.13” L x 1.95” W)
Net Weight: 320 grams (11.28 oz.)
FURNISHED ACCESSORIES
Storage Bag 26A13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
OPTIONAL ACCESSORIES
Windscreen (7 colors available) A58WS Series. . . . . . . . . . . . . .
7.6 m (25 ft) Cable (XLR to XLR) C25J. . . . . . . . . . . . . . . . . . . . .
Page is loading ...
Page is loading ...
Page is loading ...
15
AMPLIFIER
AMPLIFICADOR
AMPLIFIER
AMPLIFICADOR
GENERAL RULES FOR MICROPHONE USE
1. For optimal signal-to-noise ratio, place the microphone as close as
practical to the desired sound source.
2. Aim the microphone directly at the sound source and away from
undesired sound sources.
3. Use no more than one microphone per sound source and use the
fewest number of microphones necessary.
4. For maximum isolation, keep the distance between microphones
at least three times the distance from each source to its micro-
phone.
5. For extra bass response, work close to the microphone.
6. Avoid placing the microphone near acoustically reflective (smooth,
hard) surfaces. Failure to do so will result in a poor frequency re-
sponse and increase the chances for feedback.
7. Add a foam windscreen when using the microphone outdoors to
reduce wind noise.
8. Do not cover any part of the grille with your hand. Covering the
grille alters the sound, distorts the polar pattern, and increases the
chances for feedback.
9. Keep foreign particles out of the grille and the windscreen, as they
may alter the frequency response. If necessary clean the grille with
warm, soapy water. Rinse the grille with plain water and let it dry
before re-installing it.
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- español: Shure AXS1 Manual de usuario
