Alpine CVA-1005R User manual

R

SERIAL NUMBER/NUMÉRO DE SÉRIE/NÚMERO DE SERIE:

INSTALLATION DATE/DATE D'INSTALLATION/FECHA DE INSTALACIÓN:

INSTALLATION TECHNICIAN/INSTALLATEUR/INSTALADOR:

PLACE OF PURCHASE/LIEU D'ACHAT/LUGAR DE ADQUISICIÓN:

ALPINE ELECTRONICS, INC.

Tokyo office: 1-1-8 Nishi Gotanda,

Shinagawa-ku, Tokyo 141-8501, Japan

Tel.: (03) 3494-1101

ALPINE ELECTRONICS OF AMERICA, INC.

19145 Gramercy Place, Torrance,

California 90501, U.S.A.

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF CANADA, INC.

Suite 203, 7300 Warden Ave. Markham,

Ontario L3R 9Z6, Canada

Tel.: 1-800-ALPINE-1 (1-800-257-4631)

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.

6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, Australia

Tel.: (03) 9769-0000

ALPINE ELECTRONICS GmbH

Kreuzerkamp 7-11 40878 Ratingen, Germany

Tel.: 02102-45 50

ALPINE ITALIA S.p.A.

Via C. Colombo 8, 20090 Trezzano Sul

Naviglio MI, Italy

Tel.: 02-48 47 81

ALPINE ELECTRONICS FRANCE S.A.R.L.

(RCS PONTOISE B 338 101 280)

98, Rue De La Belle Etoile, Z.I. Paris Nord Il

B.P. 50016 F-95945, Roissy,

Charles De Gaulle Cedex, France

Tel.: 01-48 63 89 89

ALPINE ELECTRONICS OF U.K., LTD.

13 Tanners Drive, Blakelands,

Milton Keynes MK14 5BU, U.K.

Tel.: 01908-61 15 56

ALPINE ELECTRONICS DE ESPAÑA, S.A.

Portal De Gamarra 36, Pabellón 32

01013 Vitoria (Alava)-Apdo. 133, Spain

Tel.: 34-45-283588

Designed by ALPINE Japan

Printed in Japan (Y)

68P21523Y62-B

Yamagata Printing Co.,

Ltd.

2-6-34, Takashima,

Nishi-ku, Yokohama,

Kanagawa, Japan

• OWNER'S MANUAL

Please read this manual to maximize your enjoy-

ment of the outstanding performance and feature

capabilities of the equipment, then retain the

manual for future reference.

• MODE D'EMPLOI

Veuillez lire ce mode d'emploi pour tirer pleinement

profit des excellentes performances et fonctions de

cet appareil, et le conservez-le pour toute référence

future.

• MANUAL DE OPERACIÓN

Lea este manual, por favor, para disfrutar al máximo

de las excepcionales prestaciones y posibilidades

funcionales que ofrece el equipo, luego guarde el

manual para usarlo como referencia en el futuro.

CVA-1005

Mobile Multimedia Station

40W × 4

2

English

The exclamation point within an

equilateral triangle and "WARNING"

are intended to alert the user to the

presence of important operating

instructions.

Failure to heed the instructions will

result in severe injury or death.

Le point d'exclamation dans un

triangle équilatéral et la mention

"AVERTISSEMENT" sont destinés à

attirer l'attention de l'utilisateur sur la

présence d'instructions importantes.

Le non respect de ces instructions

peut provoquer de graves blessures,

voir la mort.

El símbolo de exclamación dentro del

triángulo y "ADVERTENCIA", tienen

como fin alertar al usuario de la

presencia de instrucciones de opera-

ción importantes.

El hacer caso omiso de las instruccio-

nes podría resultar en heridas graves

o la muerte.

WARNING

Precautions

DO NOT DISASSEMBLE OR ALTER.

Doing so may lead to accident, fire or

electric shock.

KEEP SMALL ARTICLES OUT OF THE

REACH OF CHILDREN. If swallowed,

consult a physician immediately.

USE THE CORRECT AMPERE RATING

WHEN REPLACING FUSES. Failure to do

so may result in fire or electric shock.

HALT USE IMMEDIATELY IF A PROB-

LEM APPEARS. When problems occur

such as a lack of sound or video,

foreign objects inside the unit, smoke

coming out, or noxious odors, stop

use immediately and contact the

dealer where you bought the equip-

ment. Failure to do so may result in

an accident or injury.

DO NOT OPERATE THE EQUIPMENT OR

LOOK AT THE SCREEN WHILE DRIVING

THE VEHICLE. Operating the equipment

may distract the driver from looking

ahead of the vehicle and cause accident.

Always stop the vehicle in a safe location

before operating this equipment.

DO NOT MIX NEW BATTERIES WITH

OLD BATTERIES. INSERT WITH THE

CORRECT BATTERY POLARITY. When

inserting the batteries, be sure to

observe proper polarity (+ and –) as

instructed. Rupture or chemical

leakage from the battery may cause

fire or personal injury.

Page is loading ...

4

English

DO NOT RAISE THE VOLUME EXCES-

SIVELY. Keep the volume at a level where

you can still hear outside noises while

driving. Driving while unable to hear

outside noises could be the cause of

accident.

DO NOT USE THIS EQUIPMENT FOR

PURPOSES OTHER THAN STATED FOR THE

VEHICLE. Failure to do so may result in

electric shock or injury.

KEEP FOREIGN OBJECTS OUT OF THE

MONITOR COMPARTMENT.

Also, avoid placing your hands in the area

where it might interfere with the monitor's

operation.

USE ONLY VEHICLES WITH A 12 VOLT

NEGATIVE (–) GROUND.

Check with your dealer if you are not sure.

Failure to do so may result in fire or

electric shock.

It is dangerous (and illegal in many states)

for the driver to watch the TV/Video while

driving the vehicle. The driver may be

distracted from looking ahead and an

accident could occur.

Install the CVA-1005 correctly so that the

driver cannot watch TV/Video unless the

vehicle is stopped and the emergency

brake is applied.

If the CVA-1005 is not installed correctly,

the driver will be able to watch the TV/

Video while driving the vehicle and may

be distracted from looking ahead causing

an accident. The driver or other people

could be severely injured.

Precautions

The exclamation point within an

equilateral triangle and "WARNING"

are intended to alert the user to the

presence of important operating

instructions.

Failure to heed the instructions will

result in severe injury or death.

Le point d'exclamation dans un

triangle équilatéral et la mention

"AVERTISSEMENT" sont destinés à

attirer l'attention de l'utilisateur sur la

présence d'instructions importantes.

Le non respect de ces instructions

peut provoquer de graves blessures,

voir la mort.

El símbolo de exclamación dentro del

triángulo y "ADVERTENCIA", tienen

como fin alertar al usuario de la

presencia de instrucciones de opera-

ción importantes.

El hacer caso omiso de las instruccio-

nes podría resultar en heridas graves

o la muerte.

WARNING

Page is loading ...

6

English

DO NOT BLOCK VENTS OR RADIATOR

PANELS. Blocking them may cause heat to

build up inside and may result in fire.

STOP THE VEHICLE IF UNIT OPERATION

MIGHT INTERFERE WITH DRIVING.

Remove the anti-theft cover when you

drive. This prevents the cover from falling

off the unit and interfering with the safe

operation of the vehicle.

Operation of some of the functions of this

unit is very complex. Because of this, it was

deemed necessary to place these functions

into a special screen. This will restrict

operation of these functions to times when

the vehicle is parked. This ensures the

focus of the driver's attention will be on the

road and not on the CVA-1005. This has

been done for the safety of the driver and

passengers.

Title Input and Audio Processor Adjust-

ments cannot be made if the car is

moving. The car must be parked and the

parking brake must be engaged for the

procedure described in the Owner's

Manual to be valid. The warning "CAN'T

OPERATE WHILE DRIVING," will be

displayed if any attempts are made to

perform these operations while driving.

This operation is the same as when

selecting sources using the remote control

(RUE-4165). When the car is parked, the

selection is made as described in the

Owner's Manual.

The exclamation point within an

equilateral triangle and "CAUTION"

are intended to alert the user to the

presence of important operating

instructions.

Failure to heed the instructions can

result in injury or material damage.

Le point d'exclamation dans un

triangle équilatéral et la mention

"ATTENTION" sont destinés à attirer

l'attention de l'utilisateur sur la pré-

sence d'instructions importantes.

Le non respect de ces instructions

peut provoquer des blessures ou des

dommages de matériels.

El símbolo de exclamación dentro del

triángulo y "PRUDENCIA", tienen

como fin alertar al usuario de la

presencia de instrucciones de opera-

ción importantes.

El hacer caso omiso de las instruccio-

nes podría resultar en heridas o

daños materiales.

CAUTION

Precautions

Page is loading ...

8

English

Contents

Page/ Page /Página

2/ 3 ....................................................................... Precautions

Basic Operation

18/ 19 ........................................................... Using Face Cover

18/ 19 ......................................................Resetting the System

20/ 21 .........................................................Raising the Monitor

22/ 23 ...................................................... Lowering the Monitor

24/ 25 .................................................Turning Power On or Off

26/ 27 ............................. Selecting the Monitor Opening Angle

26/ 27 .............................. Adjusting the Monitor Viewing Angle

28/ 29 ................................Adjusting the Volume/ Treble/Bass/

Balance/Fader

28/ 29 ............................................................Muting the Sound

30/ 31 ........................................... Turning Loudness On or Off

Radio Operation

32/ 33 ................................................................ Manual Tuning

34/ 35 ...................................................Automatic Seek Tuning

36/ 37 .................................. Manual Storing of Station Presets

38/ 39 ............................ Automatic Memory of Station Presets

40/ 41 ................................... Storing into Direct Access Preset

(D.A.P.) Band

42/ 43 ............................................... Tuning to Preset Stations

44/ 45 ....................................... Selecting Preset Stations from

List Displayed

46/ 47 ................................. T.R.V.S. Search for Local Stations

CD Player/Changer Operation

(Optional)

48/ 49 ............................................ Playing Optional CD Player

or Changer

50/ 51 ...........................................Fast Forward and Backward

50/ 51 .......................................................... Music Sensor Skip

52/ 53 .......................................... Repeat Play on Single Track

54/ 55 ..................................................... M.I.X. (Random) Play

56/ 57 ........................... Displaying and Scrolling CD Title/Text

58/ 59 .............................................Displaying List of CD Titles

60/ 61 ................................................Controlling CD Changers

MD Player Operation

(Optional)

64/ 65 ................................................... Playing Mini-Disc (MD)

68/ 69 ........................................................Music Sensor (Skip)

68/ 69 ...........................................Fast Forward and Backward

70/ 71 .................................................................... Repeat Play

70/ 71 ..................................................... M.I.X. (Random Play)

72/ 73 ................................................Scrolling Displayed Titles

74/ 75 ........................................... Displaying List for MD Titles

Page is loading ...

10

English

Contents

Cassette Player Operation

(Optional)

76/ 77 ............................................ Controlling Cassette Player

78/ 79 ............................

Fast Forward/Rewind/Reversing Tape

Direction/Pause

80/ 81 ..............................................................Program Sensor

80/ 81 .................................................................... Repeat Play

82/ 83 .......................................................................Blank Skip

DVD/Video CD/CD Player Operation

(Optional)

84/ 85 .............................................Playing DVD/Video CD/CD

88/ 89 .......................................................................Still/Pause

88/ 89 .......................Chapter (DVD)/Track (Video CD) Sensor

90/ 91 ..................................................Fast Forward/Backward

90/ 91 .................................................................... Repeat Play

92/ 93 ......................................Navigation System Operation

(Optional)

94/ 95 .......................................... Auxiliary Device Operation

(Optional)

96/ 97 ......................................... Audio Processor Operation

(Optional)

Other Useful Features

146/ 147 ....................................Displaying Spectrum Analyzer

148/ 149 ............................... Turning Defeat Mode On and Off

150/ 151 ..........................................Titling Radio Stations/CDs

154/ 155 ......................................... Adjusting Subwoofer Level

158/ 159 ......................................................... Switching Phase

160/ 161 ............................

Setting the External Device Interrupt

Mode

164/ 165 ......................................Setting Interrupt Icon Display

166/ 167 ......................................................... Interrupt Feature

170/ 171 ..............................................Setting Bass Frequency

172/ 173 ....................................................Setting Visual Mode

174/ 175 ............................................... Selecting Rear Monitor

178/ 179 .......................................................... Displaying Time

180/ 181 ...........................................................Resetting Clock

184/ 185 ......................................Setting Daylight Saving Time

186/ 187 ...................................Turning Sound Guide Function

On or Off

188/ 189 ............................................................ Demonstration

190/ 191 ............................ Setting Automatic Opening/Closing

of Monitor

192/ 193 ...................................Adjusting Brightness of Picture

196/ 197 ..............................................Adjusting Tint of Picture

198/ 199 ........................................... Adjusting Color of Picture

200/ 201 ..................................................... Illumination Control

204/ 205 ......................Switching Background Textures/Colors

206/ 207 ..................... Setting Automatic Background Texture/

Color Scroll

208/ 209 ............................................Switching Display Modes

210/ 211 ............................. Playing 2 Sources Simultaneously

214/ 215 .........................................................Remote Control

226/ 227 .................................................... In Case of Difficult

234/ 235 ........................................................... Specifications

Page is loading ...

12

English

Precautions

Temperature

Be sure the temperature inside the vehicle is

between +45˚C (+113˚F) and 0˚C (+32˚F)

before turning your unit on.

Fuse Replacement

When replacing the fuse(s), the replacement

must be of the same amperage as shown on

the fuse holder. If the fuse(s) blows more than

once, carefully check all electrical connections

for shorted circuitry. Also have your vehicle's

voltage regulator checked.

Maintenance

If you have problems, do not attempt to repair

the unit yourself. Return it to your Alpine dealer

or the nearest Alpine Service Station for

servicing.

Installation Location

Make sure the CVA-1005 monitor/receiver will

not be exposed to:

• Direct sun and heat

• High humidity

• Excessive dust

• Excessive vibrations

Alpine products equipped with the Ai-NET bus,

connected to the CVA-1005, can be operated

from the CVA-1005. Depending on the products

connected, the functions and displays will vary.

For details, consult your Alpine dealer.

Page is loading ...

14

English

Press the PWR (Power) button on the unit to

turn the power on to the unit.

1

Press the OPEN/CLOSE button to open the

monitor. The unit beeps 3 times and raises the

monitor. The opening screen appears on the

monitor.

2

3

Press the SOURCE button. The display shows

the main menu screen.

Rotate the rotary encoder and select "RADIO"

from the main menu.

Note: If a DVD player is connected and its

power is on, the display shows " DVD

AUX2 " instead of " AUX1 AUX2 ."

4

This section describes the basic operation of

the radio. These operations also apply to the

other sources.

1

45

2

36

Basic Operation

(To be continued)

Volume Level/

Niveau du

volume/Nivel de

volumen

Current Time/

Heure

actuelle/Hora

actual

Selected Source/

Source

sélectionnée/

Fuente

seleccionada

The Function Guide displays the labels for each of the Function buttons. These labels will

change depending upon the functions for the selected source./Le guide des fonctions

indique les différentes fonctions des touches de fonction. Le contenu du guide change

chaque fois que vous changez de source./La guía de funciones muestra las funciones de

los botones de función. Esta guía de funciones cambiará cada vez que cambie de fuente.

Radio Mode Screen/Ecran du mode radio/Pantalla del modo de la radio

Page is loading ...

16

English

Press the rotary encoder to execute the

selection. The Radio mode screen is displayed.

Note: If PAGE 1/2 or PAGE 1/3 appears in the

Function Guide menu, there are

additional functions available for the

selected source. Access these functions

by pressing the FUNC button.

5

Basic Operation

Press the SOURCE button again and select

another source.

6

Page is loading ...

18

English

Basic Operation

Using Face Cover

An anti-theft face cover is provided with the

CVA-1005.

Put the face cover onto the CVA-1005 when

you leave the vehicle.

Be sure to remove the anti-theft face cover

when you drive.

1

To the right side of the Rotary Encoder, there is

a small switch. Using a pencil or other pointed

object, press this reset switch to reset the unit,

then turn the power on to the unit.

Resetting the System

Immediately after installing or applying power to

the CVA-1005, it should be reset. If any optional

component such as a CD changer is added

after the initial installation, the unit should also

be reset. This will ensure the CVA-1005

recognizes the new component.

Notes: • After turning the system off, a

slight ghost of the image will

remain temporarily. This is an

effect peculiar to LCD technology

and is normal.

• Under cold temperature condi-

tions, the screen may lose

contrast temporarily. After a short

warm-up period, it will return to

normal.

Page is loading ...

20

English

Basic Operation

1

Raising the Monitor

Note: The CVA-1005 is a device of precision.

Please gently handle it to enjoy its

excellent capabilities for a long time.

Press the OPEN/CLOSE button.

The unit beeps 3 times and raises the monitor

automatically.

Notes: • If the monitor touches an obstacle

while it is being raised, the unit will

stop raising the monitor immediately.

Should this occur, remove the

obstacle and press the OPEN/

CLOSE button again to raise the

monitor.

• When the movable monitor is

opened, do not place any object on

the monitor and be careful not to

bump or apply any pressure to the

monitor while it is open. This can

cause damage to the mechanism.

• Under low ambient temperature

conditions, the display may be dark

for a short period of time immediately

after the power is turned on. Once

the LCD has warmed up, the display

will return to normal.

• For your safety, some operation of

the unit cannot be performed while

the vehicle is in motion. In this case,

first stop the vehicle and engage the

parking brake, then perform the

operation.

• Operation of the remote control

(described on pages 216-224) can be

carried out even while the monitor

screen is closed.

1

Page is loading ...

22

English

1

Basic Operation

1

Press the OPEN/CLOSE button.

The unit will beep 3 times and lower the monitor

automatically.

Note: If the monitor touches an obstacle while

it is being lowered, the unit will stop

lowering the monitor immediately.

Should this occur, remove the obstacle

and press the OPEN/CLOSE button

again to lower the monitor.

Lowering the Monitor

Note: The CVA-1005 is a device of precision.

Please gently handle it to enjoy its

excellent capabilities for a long time.

Page is loading ...

24

English

Basic Operation

12

Turning Power On or Off

Some of this unit's functions, cannot be

performed while the vehicle is in motion. Be

sure to stop your vehicle in a safe location and

apply the parking brake, before attempting

these operations.

Press the PWR (Power) button to turn on the

unit.

The opening screen appears automatically.

Note: The unit can be turned on by pressing

any button on the unit except the MUTE,

OPEN/CLOSE and

(ANGLE)

buttons.

1

2

Press the PWR (Power) button again to turn off

the unit.

Notes:

• The CVA-1005 draws minimal current even

when its power switch is turned off. If the

switched power (ignition) lead of the CVA-

1005 is connected directly to the positive (+)

post of the vehicle's battery, the battery may

be discharged. If this lead is unswitched, it

must be disconnected from the battery post

should the vehicle be left unused for an

extended period of time.

An SPST (Single-Pole, Single-Throw) switch

(sold separately) can be added to simplify

this procedure. Then, you can simply place it

in the OFF position when you leave the

vehicle. Turn the SPST switch back ON

before using the CVA-1005. For connecting

the SPST switch, refer to the Installation

manual.

• Some operation of the unit cannot be

performed while the vehicle is in motion. In

this case, be sure to first stop your vehicle

and apply the parking brake, then perform

the operation.

Page is loading ...

26

English

1

Basic Operation

Press and hold the OPEN/CLOSE button for at

least 2 seconds while the monitor is being

raised. Each press changes the monitor angle

back or forth.

1

Selecting the Monitor

Opening Angle

The monitor opening angle can be set in 2

positions.

Press the

and (ANGLE) buttons to

adjust the monitor's angle so the screen will be

in the best viewing position. Each press of the

buttons produces a beep and changes the

screen angle between 80 and 104 degrees.

Notes: • If the monitor touches an obstacle

while the angle is being adjusted the

unit will stop the screen immediately.

Should this happen, remove the

obstacle and press the

or

button again.

• The screen color will vary when

viewed at certain angles. Adjust the

screen angle for the best viewing

position.

• If the voltage of the vehicle's battery

power is low, the screen may blink

when the screen angle is changed.

This is normal and not a malfunction.

Adjusting the Monitor

Viewing Angle

Adjust the monitor's angle for better visibility.

Page is loading ...

28

English

1

Basic Operation

12

Press the rotary encoder repeatedly until the

mode you wish to adjust is obtained. Each

press changes the modes as follows:

→ BAS. → TRE. → BAL. → FAD. → VOL.

The volume level can be adjusted at any time

by just rotating the rotary encoder.

1

Adjusting the Volume/

Treble/Bass/Balance/

Fader

2

Rotate the rotary encoder to set to the desired

sound within 5 seconds after selecting the

mode.

Note: If the rotary encoder is not turned or

pressed within 5 seconds after selecting

the BAS. (Bass), TRE. (Treble), BAL.

(Balance), or FAD. (Fader), the unit

automatically defaults back to the VOL.

(Volume) mode.

Press the MUTE button to switch between the

Mute On and Off modes.

When the MUTE On mode is selected, the

volume level instantly decreases.

1

Muting the Sound

Page is loading ...

30

English

Basic Operation

1

Press and hold the rotary encoder for at least 2

seconds to switch between the Loudness On

and Off modes.

1

Turning Loudness On or

Off

Loudness introduces a special low and high

frequency emphasis at the lower volume

settings. This compensates for the ear's

decreased sensitivity to bass and treble sound

at these low listening levels.

Note: When an equalizer or digital sound

processor is connected, this function is

inoperative.

Page is loading ...

32

English

Radio Operation

2

1

4

5

3

1

Rotate the rotary encoder to scroll the bottom

menu and select "RADIO," then press the rotary

encoder.

The radio mode is activated and the display

changes to the Radio Mode screen.

2

Press the BAND button to select the desired

radio band. Each press changes the bands as

follows:

→ FM1 → FM2 → AM

3

4

Press the 1 (() or 3 ()) button to

change the radio frequency downward or

upward respectively. Each press changes the

frequency by one step. When the button is

pressed and held, the frequency changes

continuously until the button is released.

Note: When a stereo FM station is tuned in,

the STEREO indicator appears in the

display.

5

Press the 2 (TUNE) button to choose the

manual tuning mode. Each press changes the

function modes for the buttons 1 and 3 as

follows:

→ Distance → Local → Manual

gg

g

ff

f

gg

g

ff

f

((

(

))

)

TUNE

Manual Tuning

Press the SOURCE button after turning on the

power.

The main menu screen appears.

Page is loading ...

34

English

Radio Operation

Automatic Seek Tuning

There are two modes you can select for auto

tuning, DX and Local:

• DX (Distance) mode (with DX SEEK indicator

ON); Both strong and weak stations will be

tuned in.

• Local mode (with DX SEEK indicator OFF);

Only strong stations will be tuned in.

The initial setting is DX.

Press the BAND button repeatedly to select the

desired radio band, FM or AM.

1

2

Press the 2 (TUNE) button to select the

desired mode, DX or Local. Each press

changes as follows:

→ Distance → Local → Manual

TUNE

Press the 1 (g) or 3 (f) button to

automatically seek a radio station downward or

upward respectively.

When the unit finds a station, it stops. To

automatically seek next station, press the same

button again.

Note: When a stereo station is tuned in, the

STEREO indicator appears in the

display.

3

2

3

1

Page is loading ...

36

English

Radio Operation

1

23

Tune in a desired radio station you wish to store

in the preset memory by manual or automatic

seek tuning.

Press the FUNC (PAGE 1/2) button.

Press and hold any one of the Function buttons

1 (P.SET1) through 6 (P.SET6) for at least 2

seconds until the Function Guide indicators

P.SET1 through P.SET6 in the display blinks

(for 5 seconds).

2

1

Press the Function button into which you wish

to store the station while the Function Guide

indicators P.SET1 through P.SET6 in the

display are blinking (within 5 seconds).

The Function Guide indicators in the display

stops blinking, indicating that the station has

been memorized at the Function button pressed.

3

PAGE

1/2

Manual Storing of Station

Presets

A total of 24 stations can be stored in the preset

memory (6 stations for each band; FM1, FM2,

AM or D.A.P.).

4

Repeat the above procedure (1 to 3) to store up

to 5 other stations onto the same band.

To use this procedure for other bands, simply

select the band desired and repeat the

procedure.

Note: If a preset memory has already been

set in the same Function button, it will

be cleared and the new station will be

memorized.

P.SET

1

P.SET

2

P.SET

3

P.SET

4

P.SET

5

P.SET

6

P.SET 1 P.SET 2 P.SET 3 P.SET 4 P.SET 5 P.SET 6

Page is loading ...

38

English

Radio Operation

2

1

Press the BAND button in the radio mode to

select the desired radio band.

1

Automatic Memory

(A.MEMO) of Station Pre-

sets

The tuner can automatically seek and store 6

strong stations in the selected band in order of

signal strength.

2

A.MEMO

Press the 6 (A.MEMO) button.

The tuner automatically seeks and stores 6

strong stations into the 1 (P.SET1) to 6

(P.SET6) buttons in order of signal strength.

When the automatic storing has been com-

pleted, the tuner goes to the station stored in

the 1 (P.SET1) button.

Notes: • If no stations are stored, the tuner will

return to the original station you were

listening to before the automatic

storing procedure began.

• The radio station names (titles) may

be erased when Automatic Memory

of Station Presets function is

performed.

Page is loading ...

Alpine CVA-1005R User manual

This manual is also suitable for

Alpine CVA-1005R User manual

in other languages

Related papers

Other documents