36 ENGLISH
GPS geolocalization
The Global Positioning System (GPS) is a satellite-based positioning system, with a global
and continuous coverage. To access the GPS, select Settings > Location Access > GPS
Satellites (I/O). When the GPS function is activated, the phone starts to collect data from
satellites and determines the current position. The Fix Times (position detection) are
variable and can be affected by several external factors (clouds, high buildings, etc.). Limit
the use of battery and memory by switching off this function when you don’t need it. The
device is compatible with NGM NAVIGATION SYSTEM
©
.
For further details on the system
operation visit www.ngm.eu.
Warning: formatting and delivery of this user manual is based on the Android
TM
operating system, NGM Italia
will not bear responsibility for any incompliance with the above guidelines or improper use of the mobile phone.
NGM reserves the right to modify any of the content in this user guide without previous public announcement.
The content of this manual may vary from the actual content displayed in the mobile phone. In such case, the
latter shall govern.
Copyright © 2013 NGM Italia
No part of this manual may be reproduced, distributed, translated, or transmitted in any form or by
any means, electronic or mechanical, including photocopying, recording, or storing in any
information storage and retrieval system, without the prior written permission of NGM Italia.
Bluetooth® is a registered trademark of the Bluetooth SIG, Inc. worldwide.
Wi-Fi® and the Wi-Fi logo are registered trademarks of the Wi-Fi Alliance.