EXSYS EX-1342 Datasheet

Category
Interface cards/adapters
Type
Datasheet

EXSYS EX-1342 provides two Virtual Parallel Centronics ports. It is designed for PC, thin client, or server to provide instant parallel port expansion in a compact box through the USB 1.1 or 2.0 Bus. With easy installation, you don't need to open the computer system and install the EX-1342 the system is running. Its chip-set is Prolific PL2305 and the data transfer rate is up to 12 Mbps. The connectors are 1 x B-female connector and 2 x 25 pin D-SUB parallel female connectors.

EXSYS EX-1342 provides two Virtual Parallel Centronics ports. It is designed for PC, thin client, or server to provide instant parallel port expansion in a compact box through the USB 1.1 or 2.0 Bus. With easy installation, you don't need to open the computer system and install the EX-1342 the system is running. Its chip-set is Prolific PL2305 and the data transfer rate is up to 12 Mbps. The connectors are 1 x B-female connector and 2 x 25 pin D-SUB parallel female connectors.

USB 1.1
EX
-
1342
USB 1.1 zu 2P Parallel Centronics Ports
(Prolific Chip
-
Set)
Beschreibung :
Das EX
-
1342 USB 1.1 zu Parallel Centronics Gehäuse stellt zwei Virtuelle Parallele Ausgänge zur Verfügung. Es ist entwickelt wor
den
um zwei weitere Parallelen Centronics Ausgänge in einem kompakten Gehäuse für PC, kleine Workstation oder Server über den USB
1.1 oder 2.0 Bus zu erweitern. Durch die einfache Installation, muss der Rechner nicht geöffnet werden und der Artikel EX
-
1342 k
ann bei
laufendem Betrieb installiert werden.
Merkmale :
Schnittstelle: Virtuellen Parallel Centronics Port
I/O Adressen: wird vom Betriebs System vergeben
Interrupt: wird vom System BIOS vergeben mit Interrupt Sharing
Stromversorgung: vom USB Bus (Bus Power)
Chip
-
Set :
Prolific PL2305
Datentransfer
-
Rate :
Bis 12Mbps
Anschlüsse :
1 x B
-
Buchse Upstream
2 x 25 Pin D
-
SUB Parallel Buchse
Hardwaresysteme :
USB 1.1 oder 2.0
Abmessung / Gewicht :
150 x 70 x 30 mm / 360g
Lieferumfang :
EX
-
1342, 1 x USB Kabel A
-
Stecker auf B
-
Stecker (1.8 Meter), Treiber CD, Handbuch
Arbeitstemperatur :
Luftfeuchtigkeit :
0 bis 55
0
C
5 bis 95%
USB 1.1 to 2P Parallel Centronics Ports (
Prolific Chip
-
Set
)
Description:
The USB 1.1 to Parallel Centronics box provides two Virtual Parallel Centronics ports. It is designed for PC, thin client or
ser
ver to pro-
vide instant parallel port expansion in a compact box through the USB 1.1 or 2.0 Bus. With the easy installation you dont ne
ed
to open
the computer system and install the EX
-
1342 when the system run.
Feature :
Interface: Virtual Parallel Centronics
I/O addresses: Setting from the operating system
Interrupt: Setting from the System BIOS with Interrupt Sharing
Power from the USB Bus (Bus Power)
Connectors :
1 x B
-
female connector
2 x 25 pin D
-
SUB parallel female connector
Hardware system :
USB 1.1 or 2.0
Size / Weight :
150 x 70 x 30 mm / 360g
Packaging contents :
EX
-
1342, 1 x USB cable A
-
male to B
-
male connector (1.8 meter), Driver CD, Manual
Chip
-
Set :
Prolific PL2305
Data transfer rate :
Up to 12 Mbps
Operating Temperature :
Operating Humidity :
0 up to 55
0
C
5 up to 95%
Anwendung/Application :
Operating System (OS):
Geprüft/Approved:
Verpackung/Packing:
Computer System
Notebook
USB
Nadel Drucker
Needle Printer
Laser Printer
  • Page 1 1

EXSYS EX-1342 Datasheet

Category
Interface cards/adapters
Type
Datasheet

EXSYS EX-1342 provides two Virtual Parallel Centronics ports. It is designed for PC, thin client, or server to provide instant parallel port expansion in a compact box through the USB 1.1 or 2.0 Bus. With easy installation, you don't need to open the computer system and install the EX-1342 the system is running. Its chip-set is Prolific PL2305 and the data transfer rate is up to 12 Mbps. The connectors are 1 x B-female connector and 2 x 25 pin D-SUB parallel female connectors.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages