Markzware ID2Q User manual

ID2Qv6 Win Installation and Licensing

ID2Qv6 Quark 8 and 9 Installation for Windows

1

Installing and Activating ID2Qv6 for WIndows

4

1.1

Deactivating and Uninstalling ID2Qv6 for Windows

20

1.2

ID2Qv6 Win Installation and Licensing - 3

ID2Qv6 Quark 8 and 9 Installation for

Windows

ID2Qv6 Win Installation and Licensing - 4

Installing and Activating ID2Qv6 for WIndows

IMPORTANT NOTE: You must have Admin privileges in order to install ID2Qv6 under Windows. If

you are not logged in under and Admin Account you will need to contact your System

Administrator and have them assist you in installing ID2Qv6.

001 - Opening the Installer

(1) Extract the files from the ID2Qv6.XX Win-Installer.zip file

(2) Double-Click on the ID2Qv6Win_Installer.exe file

002 - The install Wizard starts up

ID2Qv6 Win Installation and Licensing - 5

003 - Begin Installing ID2Qv6 for Quark 8 & 9

When the ID2Qv6 - InstallShield Wizard window appears, click on the Next button (1) to proceed.

The ID2Qv6 - InstallShield Wizard window may take several seconds to appear, so please be

patient.

ID2Qv6 Win Installation and Licensing - 6

004 - Who will be using ID2Q

In the Customer Information screen, enter in your Name (1) and Company name (2). This

information is stored on your local computer as part of the installation record.

Next select whether you want ID2Q to be available for all users of the computer or just for your

account. By default this is set to Anyone who uses this computer (all users) (3).

FInally click on the Next button (4) to continue.

ID2Qv6 Win Installation and Licensing - 7

005 - Type of installation

Select Complete (1) for installation type. Then click on the Next button (2) to continue.

The Custom selection should only be used if Tech Support requests you use this setting.

ID2Qv6 Win Installation and Licensing - 8

006 - What will be installed

You will now see a list of what will happen during the install. Click on the Next button (1) to

continue with the installation.

ID2Qv6 Win Installation and Licensing - 9

007 - Installation process has started

The ID2Qv6.XX Win-Installer will now copy the ID2Q8v6 and/or the ID2Q9v6 XTensions into their

proper locations.

If you only have one version of QuarkXPress installed, then only the appropriate XTension for the

version of QuarkXPress you are using will be installed.

ID2Qv6 Win Installation and Licensing - 10

008 - Installation process has completed

When the ID2Qv6.XX Win-Installer has finished you will see the window above.

Click the Finish button (1) to close the installer.

ID2Qv6 Win Installation and Licensing - 11

009 - Activate ID2Q for Quark 8 & 9

After you click the Finish button and close the installer, you will be presented with the

LicenseControl window for ID2Q. It may take several seconds for the LicenseControl window to

appear. Initially ID2Q will be Unlicensed (1).

ID2Qv6 Win Installation and Licensing - 12

010 - Enter your License ID by copying and pasting

At this point you will need to provide your License ID in order to proceed with the activation

process.

For people who purchased online and received an email with their License ID electronically, copy

and paste the License ID from your email into the Provide/Paste a Licensing ID area (1), then click

the Next button (2) to continue.

You will also need to be connected to the internet and be able to successfully reach

www.derman.com. If you are behind a firewall or are using a proxy server and encounter any

issues activating ID2Q, please visit the Derman website faqs and review the documentation on

handling these issues. At this time if you are running a proxy server that uses a .pac file, this is not

supported by the LicenseControl software and ID2Q may not activate under this condition.

**IMPORTANT NOTE** - Control-V DOES NOT WORK with LicenseControl. You must Right-Click

and then select Paste from the menu in order to Paste your License ID into the appropriate area.

ID2Qv6 Win Installation and Licensing - 13

011 - Manually entering your License ID (typically for Boxed Product Customers)

Your License ID for ID2Q is very long! If you try and type the entire License ID in manually, you will

almost surely make a mistake. Just one incorrect character and the code will not work. Since

people who purchase Boxed versions of ID2Q may not receive an email with their License ID, you

may type just the numerical portion of your License ID into the Provide/Paste a Licensing ID: area

(1) . Entering just the numerical portion of your License ID makes it a bit easier for boxed product

users to activate their copy of ID2Q. To enter the numerical portion of your License ID, enter all of

the numbers starting after the letters "sngl". Refer to the image above and the previous image

for examples. Once you have entered your code, click on the Next button (2) to continue.

ID2Qv6 Win Installation and Licensing - 14

012 - Incorrect License ID

If you mistype or miscopy your License ID, you will be presented with an error as shown above.

Please recheck your License ID for accuracy and re-enter it. If you still are encountering issues,

please contact Markzware Tech Support

ID2Qv6 Win Installation and Licensing - 15

013 - Begin Activation

Once you have successfully entered a valid License ID you will be presented with the above

screen. Most people are anxious to get going and use ID2Q, so to do this, select Activate the

License (1) and then click on the Next button (2).

ID2Qv6 Win Installation and Licensing - 16

014 - For Boxed Product Customers Only

If you purchased a boxed version of ID2Q, you will be presented with an extra screen when you

activate the product. The fields in red are required (Name and Email Address).

Please enter accurate information, as this information is used to contact you in case you report any

issues. If you enter bogus information here, there is a very good chance you will need to

re-purchase ID2Q if you contact us for Tech Support as we will not have a valid and accurate

record of who you are and how to contact you, thus we will not be able to provide you with Tech

Support.

Once you have filled in at least your name and email, click on the Send Information button (1) to

continue.

ID2Qv6 Win Installation and Licensing - 17

015 - Markzware Software License Agreement

The last piece that needs to be handled before you activate ID2Q is to read and agree with

Markzware's Software License Agreement. If you do not agree with the License Agreement, you

will not be able to activate your copy of ID2Q.

To activate your copy of ID2Q, click on the I agree to the above stated terms button (1).

ID2Qv6 Win Installation and Licensing - 18

016 - You are now licensed

After successfully activating ID2Q, you will see a status of Licensed for this system (in green text).

You are ready to go! Click on the Done button (1) to close the LicenseControl application and

window.

ID2Qv6 Win Installation and Licensing - 19

017 - Start up QuarkXPress 8 or 9 and start converting!

018 - The ID2Qv6 Menu

Once ID2Qv6 has been installed you will see a Markzware/ID2Q menu. Under this menu there are

three items:

1. Convert InDesign® Document - Select this to bring up an Open File window and select the

InDesign document you want to convert.

2. ID2Q Updates… - This will take you to a webpage where you can check for updates to ID2Q

and other Markzware products

3. License Control… - This will bring up the LicenseControl application for ID2Q. With

LicenseControl you can see how many activations you have and most commonly this is used

to deactivate ID2Q if you want to use it on another computer or move it to another computer.

ID2Qv6 Win Installation and Licensing - 20

Deactivating and Uninstalling ID2Qv6 for Windows

Why would you want to deactivate ID2Q?

1. You want to use ID2Q on another computer. Deactivating ID2Q on your current computer will

free up your License ID for use on another computer.

2. You are planning on sending your computer out for repair. Just to be on the safe side, it is a

good idea to deactivate ID2Q before you send your computer out for repair.

3. You are planning on retiring, selling or giving away your computer. Please make sure you

deactivate ID2Q before retiring, selling or giving away your computer, if you don't deactivate,

you are throwing or giving away your License to useID2Q.

**You may deactivate and reactivate ID2Q as many times as you wish. But you as the user

are responsible for managing your License ID. If you know you are going to replace a

computer, please make sure and deactivate ID2Q before retiring the computer. This will allow

you to reactivate ID2Q on your new computer.

001 - Begin deactivating - Bring up LicenseControl for ID2Q

To begin the deactivation process, select License Control… (1) from the ID2Q menu.

Page is loading ...

Markzware ID2Q User manual

Markzware ID2Q User manual

Related papers

Other documents