2. Health & beauty
  3. Skin care appliances
  4. Rio
  5. SUFA2
SUFA2

Rio SUFA2 Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Rio SUFA2 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the maximum amount of water I can fill in the steamer?
    What is the recommended frequency and duration of the treatment?
    How long does it take for the steamer to heat up?
    How close should I place my face to the nozzle?
    What should I do after each use?
    What comes with the Rio SUFA2?
    What kind of power supply does the steamer use?
Version 1.1
Facial Steamer (SUFA2)
Facial Steamer (SUFA2)
Facial steaming is one of the most beneficial
spa beauty treatments for skin health and
overall skin condition.
Atomised steam cleanses the skin, opening
the skin pores to help eliminate toxins,
residual make-up and daily grime.
Product Overview
Facial Steamer (SUFA2)
Getting started
STEP 1 Ensure that your Facial Steamer is placed on a flat surface.
Pull the water chamber upwards to remove from the water inlet.
STEP 2 Unscrew the cap and fill the water chamber with 120ml of
water, ensure that the water level does not exceed this.
Note: The use of filtered or distilled water is recommended.
STEP 3 Firmly re-attach the cap and push the water chamber fully back
into the water inlet.
STEP 4 Remove any make up and rinse your face well.
How To Use
Facial Steamer (SUFA2)
Instructions for use
STEP 1 Adjust the angle of the mist nozzle to direct the steam onto the
desired area of your face during treatment. NOTE: The mist nozzle only
adjusts up and down and not side to side.
STEP 2 Insert the mains plug into your power supply and turn on the
power button, the indicator light will illuminate red. NOTE: The steamer
will take approx 1 minute to heat up before any steam
is produced.
STEP 3 Place your face no closer than 10cm away from the mist nozzle.
NOTE: We recommend five treatments per
week, each treatment lasting no longer
than ten minutes.
STEP 4 To finish rinse your face with cold
water and pat dry.
How To Use
Facial Steamer (SUFA2)
After use
STEP 1 Turn the unit off by pressing the power button and remove the
mains plug from your power supply. Allow the unit to cool for 30
minutes.
STEP 2 Remove the water chamber, unscrew the cap and pour water
out. Note: Ensure that you have emptied any water from the water
inlet.
STEP 3 Open the water chamber plug on the base of the unit and pour
out any remaining water.
STEP 4 Re-attach the cap and push the water chamber fully back into
the water inlet.
How To Use
Facial Steamer (SUFA2)
Contents:
•Facial steamer unit
•Power cable
•Measuring jug
Tech Spec
•Programs: On/Off
•Power Levels: On/Off
•Packed Product Dimensions:
(height x width x depth) 222 x 135
x 90 mm
•Un-packed Product Dimensions:
(height x width x depth) 280 x 220
x 115 mm
•AC/DC adaptor: N/A
•Mains operated: Yes
•Battery Operated/Type: N/A
•
Packed Weight (Kg):
125g
•
Product Net Weight (Kg):
100g
•
Manufacturer's Guarantee:
2 years
•
Barcode:
5019487003768
/