Hawking Technology HOD12DP Installation guide

Category
Network antennas
Type
Installation guide
Requirements
• Wireless Device with Removable
Antenna
• 3x Low Loss Outdoor Antenna Cables
(Hawking
HAC10N/HAC20N/HAC30N or
equivalent)
• Copper Grounding Wire
• Available Pole or Wall for Mounting
1 Mounting Your Antenna
Pole Mounting Instructions
Wall Mounting Instructions
Start Here
Quick Installation Guide
Hi-Gain
TM
Outdoor Dual-Band 12dBi Directional Antenna HOD12DP
www.hawkingtech.com
Technical Support Tel: 1.888.202.3344 E-mail: techsupport@hawkingtech.com
© 2012 Hawking Technologies, Inc. All rights reserved. All trademarks herin are the property of their respective owners.
HOD12DP- QIG 2012.02.15
8
9
3
11
10
4
5
10
11
1
12
13
7
2
10
11
3
6
6
a.
a.
b.
b.
1. HOD12DP Antenna
2. Mounting Base
3. M-Bracket
4. Pole Mount Bracket
5. M6x60 Hex (x2)
6. M6x16 Hex (x4)
7. M4x8 (x4)
8. Wall Screw (x4)
9. Wall Anchor (x4)
10. M6 Flat (x6)
11. M6 Split (x6)
12. Spacer (x4)
13. Grounding Lug
14. Adapter Cable
Package Contents
1
8
3 4 5 6 72
9 10 11 12 13 14
Connect the HOD12DP to an
antenna port on your wireless
device.
1
2
Place the HOD12DP in an
optimal outside location, using the
included mounting kits, aimed in
the desired direction
Wireless Internet
Connection
Router
Dual-Band
Bridge
Dual-Band
Access Point
HOD12DP
HOD12DP
You can utilize a single HOD12DP to
extend your wireless signal, however
the HOD12DP is ideal for building to
building solutions. Supplement an
existing network by attaching your
HOD12DP to a Dual-Band Access
Point Bridge and transmitting the
signal to another HOD12DP and
Dual-Band Bridge combination. For
the best performance make sure to
place the antennas so that they face
each other directly.
  • Page 1 1
  • Page 2 2

Hawking Technology HOD12DP Installation guide

Category
Network antennas
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI