Unika GEQ-215F Owner's manual

Unika
Brand
Unika
Model
GEQ-215F
Category
Audio equalizers
Type
Owner's manual

This manual is also suitable for

OPERATING MANUAL
This booklet contains important information concerning the proper and safe operation of your new equalizer.
PROFESSIONAL SOUND EQUIPMENT
Graphic Equalizer
Made in Taiwan
GEQ-215 / GEQ-215F
25 2540 4063 63100 100160 160250 250400 400630 6301K 1K
1.6K 1.6K
2.5K 2.5K4K 4K6.3K 6.3K10K 10K16K 16K
CHANNEL A CHANNEL B
+18+100-10
INPUT
GAIN
+12 +12
0 0
-12 -12
LOW CUT
IN / OUT
+12
0
-12
LOW CUT
IN / OUT
+18+100-10
INPUT
GAIN
+12
0
-12
UNiKA
GEQ-215
E Q U A L I Z E R
POWE R
25 2540 4063 63100 100160 160250 250400 400630 6301K 1K
1.6K 1.6K
2.5K 2.5K4K 4K6.3K 6.3K10K 10K16K 16K
dB dB
0 0
+3 +3
+6 +6
+12 +12
-3 -3
-6 -6
-12 -12
LOW
CUT
LOW
CUT
IN /
OUT
IN /
OUT
+18 +18
+10 +10
0 0
-10 -10
0 0
+3 +3
+6 +6
+12 +12
-3 -3
-6 -6
-12 -12
INPUT
GAIN
INPUT
GAIN
OUT LEVEL OUTLEVEL
CHANNEL A CHANNEL B
UNiKA
GEQ-215F
E Q U A L I Z E R
POWE R
INTRODUCTION
We congratulate you on choosing a Sound Product equalizer. You will find that it has been designed for easy use. The latest
advances in audio technology have been utilized in the design of making this equalizer the ideal brain of any audio system. We have
incorporated many features to help you, 15x2 band of tone effects controls, in/out passing switch, low-cut switch control and level
control. Whether you're looking to custom tailor that mix or optimize the acoustics of a really tough room. Please read all instructions
carefully before operating.
WARNINGS
1. All operating instructions should be read before using this equipment.
2. To prevent the risk of electrical shock, do not remove cover or back, no user-serviceable parts inside, refer servicing to a
qualified service technician.
3. Do not expose to direct sunlight or heat source, such as radiators, stoves, or other appliances that produce heat.
4. This unit should be cleaned only with a damp cloth, audio solvents or other cleaning detergents.
5. When moving this equipment it should be placed in its original carton and packing. This will reduce the risk of damage in transit.
INSTRUCTIONS FOR CONNECTIONS
1. Be sure that the power (1) is in the off position. All connections must be made with the equipment off.
2. Before plugging in the power cord (8) make sure the voltage selector switch (7) is set to the correct voltage.
(The unit is preset to 110 volts). Insert the power cord into the proper source.
3. For best sound use only high quality audio cables when hooking up this equalizer. Make sure that all cables are pushed in securely.
4. Make sure you correctly attach the patch cables for the input source and output signal.
OPERATING INSTRUCTIONS
1. Power On: Once you have made all connections to your equalizer, Press the Power (1) button. The equalizer is on. Press again
to turn the power off.
2. IN/OUT Passing Switch (2) : Press this switch in, the equalizer will be activated. Press it again to out, the signal will be passed.
3. Graphic Equalizer (3) : These sliders allow adjustment up to 12dB each octaves from 25Hz to 16KHz (Dual 15 Band). These
equalizer controls are provided for improving frequency response of your system, compensating for room environment effect.
4. Level adjustment control (6) : You can obtain a proper output signal level using this level control. The Level Display LEDS (4) : will
indicate you the exact output levels from -10dB to +18dB in 4 steps. When the +18dB LED lights up, it tell you that there is too
much output power calibrated to produced distortion, lower the level control gradually until this LED goes off.
5. Low Cut Switch (5): The low-cut switch attenuates the muddy and unwanted sound created by your source equipment.
GRAPHIC EQUALIZER
GEQ-215 / GEQ-215F
GEQ-215
Dual 15 band, 2/3 Octave from 20Hz ~ 20KHz
±12dB input gain range
EQ band control level range of ±12dB
20mm slide controls 20Hz ~20KHz frequency response, ±1dB
Low cut filter 60Hz - 3dB
XLR, TRS balance input & output
Signal level at -10dB, 0dB, +10dB, +18dB LEDs indicators
Low cut, & bypass function w/LEDs indicators
Operating voltage is switchtable:
110V-120V/60Hz; 220V-240V/50Hz
1U rack space
GEQ-215F
Dual 15 band, 2/3 Octave from 20Hz ~ 20KHz
±12dB input gain range
EQ band control level range of ±12dB
45mm slide controls 20Hz ~20KHz frequency response, ±1dB
Low cut filter 60Hz - 3dB
XLR, TRS balance input &output
FDC Feedback Detection Circuit With 30 LEDs indicators
Signal level at -10dB, 0dB, +10dB, +18dB LEDs indicators
Low cut, & bypass function w/LEDs indicators
Operating voltage is switchtable:
110V-120V/60Hz; 220V-240V/50Hz
2U rack space
25 2540 4063 63100 100160 160250 250400 400630 6301K 1K
1.6K 1.6K
2.5K 2.5K4K 4K6.3K 6.3K10K 10K16K 16K
CHANNEL A CHANNEL B
+18+100-10
INPUT
GAIN
+12 +12
0 0
-12 -12
LOW CUT
IN / OUT
+12
0
-12
LOW CUT
IN / OUT
+18+100-10
INPUT
GAIN
+12
0
-12
UNiK A
GEQ-215
E Q U A L I Z E R
POWER
25 2540 4063 63100 100160 160250 250400 400630 6301K 1K
1.6K 1.6K
2.5K 2.5K4K 4K6.3K 6.3K10K 10K16K 16K
dB dB
0 0
+3 +3
+6 +6
+12 +12
-3 -3
-6 -6
-12 -12
LOW
CUT
LOW
CUT
IN /
OUT
IN /
OUT
+18 +18
+10 +10
0 0
-10 -10
0 0
+3 +3
+6 +6
+12 +12
-3 -3
-6 -6
-12 -12
INPUT
GAIN
INPUT
GAIN
OUT LEVEL OUTLEVEL
CHANNEL A CHANNEL B
UNiK A
GEQ-215F
E Q U A L I Z E R
POWER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OP EN
!
INPUT INPUT
OUTPUT OUTPUT
CHANNEL B CHANNEL A
FUSE:
0.5A/110V~120V
0.25A/220V~240V
AC INPUT
15 WATTS
VOLTAGE:
110V~12 0V 60H z
220V~240V 50Hz
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR
MOISTURE.
CAUTION -TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE
COVER OR ANY SCREWS. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Serial No.:
USE ONLY WITH 250V FUSE
PUSH
PUSH
1 2 23 35 56 6
4 4
GEQ-215
INPUT INPUT
OUTPUT OUTPUT
CHANNEL B
CHANNEL A
FUSE:
0.5A/110V~120V
0.25A/220V~24 0V
AC INPUT
15 WATTS
VOLTAGE:
110V~12 0V 60Hz
220V~240V 50Hz
WARNING:
TO PREVENT FIRE OR SHOCK
HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR
MOISTURE.
CAUTION
RISK OF ELECT RIC SH OCK
DO NOT OP EN
!
CAUTION -TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE
COVER OR ANY SCREWS. NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Serial No.:
USE ONLY WITH 250V FUSE
PUSH
PUSH
7
899 1010
GEQ-215F
1. Power Switch
2. In/Out Passing Switch
3. Fader Frequency setting
4. Level Display LED Indicator
5. Low Cut Switch
6. Input Gain Level Control
7. Voltage Selector Switch
8. Power Inlet
9. Input Jack
10. Output Jack
11. FDC LED Indicators
1 2 23 35 56 6
4 4
899 1010
7
WWW: http://www.unika.com.tw
E-Mail: [email protected]
6F., No. 168, Xinhu 2nd Rd., Neihu Dist., Taipei City 114, Taiwan (R.O.C.)
P R O F E S S I O N A L A U D I O
UNiKA
Front Panel and Rear Panel
11 11
  • Page 1 1
  • Page 2 2

Unika GEQ-215F Owner's manual

Unika
Brand
Unika
Model
GEQ-215F
Category
Audio equalizers
Type
Owner's manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents