How to Charge your Power Bank
1. Connect the included micro-USB cable to Power bank micro
input port , or connect a type-C cable to power bank Type-C
input port .
2. Charge via any powered USB port . when the indicators
twinkling, it means power bank being charged
How to Charge your Phone/Device:
1. Connect USB charging cable to USB port ,or connect the Type-C
port cable to type-C port on power bank ,
2. Another side of cable connect with the phone/Device with
suitable port . even without Pressing power button , you will see the
phone/device being charged and indicator in power bank is also
twinkling
3. To stop charging , remove cable from your device
How to check remaining charge capacity
Press power button once to check remaining Power Bank charge
capacity. 1 LEDs flashing ≈ less than 25%; 1 LEDs solid≈about
25%;2 LEDs≈ about 50%; 3 LEDs ≈ about 75%; 4 LEDs≈ about
75-100%.
Safety Instructions
1. Do not modify, disassemble, open, drop, crush, puncture or shred this
product.
2. Do not expose this product to rain or water.