VEVOR HS-325A User manual

Type
User manual

VEVOR HS-325A is a ratcheting cable cutter designed for cutting copper and aluminum cables up to 240mm2 (AWG 600MCM). It features a quick-release lever for easy operation, a ratchet mechanism for saving labor, and a forged blade for clean and precise cuts. The cutter also has a safety lock to prevent accidental opening.

VEVOR HS-325A is a ratcheting cable cutter designed for cutting copper and aluminum cables up to 240mm2 (AWG 600MCM). It features a quick-release lever for easy operation, a ratchet mechanism for saving labor, and a forged blade for clean and precise cuts. The cutter also has a safety lock to prevent accidental opening.

NEED HELP? CONTACT US!
Have product questions? Need technical support?
Please feel free to contact us:
This is the original instruction, please read all manual instructions carefully before operating.
VEVOR reserves clear interpretation of our user manual. The appearance of the product shall
be subject to the product you received. Please forgive us that we won't inform you again if
there is any technology or software updates on our product.
CABLE CUTTER
HS-325A
HS-520A
TOUGH TOOLS, HALF PRICE
030201
WARNING!
1. Before using this product, please read
instructions carefully and understand the
specifications.
2. Disconnect power supply before working
if cut wiring .
3. Inspect before every use; do not use if
damaged. If they are loose, tighten them in
time to avoid damage to the cutting edge;
4. Keep away from children.
5. When using this product, be sure to wear
personal protective equipment such as protec-
tive gloves and goggles to prevent accidental
injury.
6. When using this product, pay attention to
keeping the jaws clean and lubricated to
prolong the service life.
7. Do not use this product for objects being
cut beyond its range.
8. When using this product, do not put your
fingers or other objects into the jaws to avoid
injury.
9. Please don’t use bolt cutter head instead
of a hammer to strike
RATCHETING CABLE CUTTER
Cutting for CU/AL cables
Convenient quick release lever
Save labor with ratchet design
Cutting easily with forging blade
With safety lock
Model No.
HS-325A
HS-520A
Cutting Range
240mm2 (AWG 600MCM)Max. Cu/Al cable
400mm2 (AWG 750MCM)Max. Cu/Al cable
Ratchet blade
Release
PVC handles
Address:Baoshanqu Shuangchenglu 803long 11hao
1602A-1609shi Shanghai
Imported to AUS: SIHAO PTY LTD, 1 ROKEVA
STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd., Suite 250,
9166 Anaheim Place, Rancho Cucamonga, CA 91730
Pooledas Group Ltd
Unit 5 Albert Edward House, The
Pavilions Preston, United Kingdom
SHUNSHUN GmbH
Römeräcker 9 Z2021,76351
Linkenheim-Hochstetten, Germany
TOUGH TOOLS, HALF PRICE
Technical Support and E-Warranty Certificate
www.vevor.com/support
CABLE CUTTER
USER MANUAL
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only
represents an estimate of savings you might benefit from buying certain tools
with us compared to the major top brands and doses not necessarily mean to
cover all categories of tools offered by us.
You are kindly reminded to verify carefully when you are placing an order with
us if you are actually saving half in comparison with the top major brands.
Technical Support and E-Warranty Certificate
www.vevor.com/support
  • Page 1 1
  • Page 2 2

VEVOR HS-325A User manual

Type
User manual

VEVOR HS-325A is a ratcheting cable cutter designed for cutting copper and aluminum cables up to 240mm2 (AWG 600MCM). It features a quick-release lever for easy operation, a ratchet mechanism for saving labor, and a forged blade for clean and precise cuts. The cutter also has a safety lock to prevent accidental opening.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI