AUNE X1sGT User manual

Brand: AUNE

Model: X1sGT

Type: User manual

AUNE X1sGT is a multifunctional DAC with a headphone amplifier, featuring a fully-discrete headphone amplifier with 4.4mm balanced and 6.35mm single-ended outputs, delivering 1200mW and 320mW of power respectively at 32Ω. It supports up to 32bit/768kHz PCM and DSD512 via USB, 24bit/384kHz PCM and DoP128 via coaxial, and 24bit/192kHz PCM and DoP64 via optical inputs. External clock input with PLL technology is also supported. The X1sGT offers a variety of filter modes for both general and headphone listening, allowing you to tailor the sound to your preference.

X1S GT USB⾳频解码器

32bit/768k D SD D AC/Headphone Ampliﬁer

使⽤⼿册/UserManual

DearCustomers:

ThanksforpurchasingtheauneX1sGTandcongratulationsonchoosingthishighqualityDACwith

headphoneampliﬁer.

WesincerelyhopetheX1sGTwillbringyouexcellentHi-Fiexperience.

Pleasereadthismanualcarefullybeforeusingthedevice.

Preface

FrontPanel

Button Indicatorlight 4.4mmbalanced

headphonejack

Volumeknob

Knobbacklight

6.35mm

headphonejack

X1s

USB

10MIN

COAX

PREAMPOUT

Externalclockinput Powerswitch

Preampoutput

Lineoutput Opticalinput Powerinput

Coaxialinput

AUDIOOUT

OPT POWERIN

USBinput

RearPanel





Tth

heX1sGT,asthe8  Gen oftheclassic

X1series,innovativelyaddedclockinput

with PLL technology and the complex

fully-discrete headphone amplifier. It is

a multifunctional DAC with headphone

amplifier.

LineOutput:

Dimensions:

Outputlevel:2.0Vrms

Optical:24bit/192kDoP64(MAX)

Input:

USB:32bit/768kDSD512(MAX)

Coaxial:24bit/384kDoP128(MAX)

DNR:120dB

THD+N:0.00013%

OutputPower:

SNR:120dB

4.4mmbalanced:1200mW@32Ω

6.35mmsingle-ended:320mW@32Ω

145*171*45(mm)

2kg

Weight:

Accessories:

Poweradapter,USBcable,quickstartguide,6.35mm(M)to3.5mm(F)adapter

Introduction Specifications

Operation

Instructions

Standardmode(headphone)

Puremode(general)

Puremode(headphone)

Pressthebuttonfor5seconds:knobbacklighton/oﬀ

USBinput

Opticalinput

Coaxialinput

Externalclocksuccessfullyconnected

1.Shortpress:changeinput

Indicatorlight

2.Pressthebuttontwice:changefiltermode

B/C

Standardmode(general)

B/C

Knobbacklight

AsaUSBDAC

2.Pressthebuttontosettheinputto“USB”

1.UsetheUSBcableintheboxtoconnecttheX1sGTandacomputer

3.Playthemusiconthecomputer

5.Optional:connectheadphonestotheX1sGTvia6.35mm/4.4mmheadphoneoutput.Rotate

thevolumeknobtoadjustthevolume

4.Optional:connecttheX1sGTtoanamplifier/activespeakersviaAUDIOOUT

Operation

Instructions

AU DI O OU T

LI NE I N

USB

10M IN

COAX

PREAMP OUT

4.Optional:connecttheX1sGTandanamplifier/activespeakersviaAUDIOOUT

3.Playmusicontheconnecteddevice

2.SetinputtoCOAXorOPTaccordingly

1. Connect the X1s GT to a digital audio device (eg. digital transport, computer main board with

digitaloutputs)

5.Optional:connectheadphonesto theX1sGTvia 6.35mm/4.4mm headphoneoutput. Rotatethe

volumeknobtoadjustthevolume

AsaCoaxial/OpticalDAC

Operation

Instructions

USB

10M IN

COAX

PREAMP OUT

CO AX IN

CO AX OUT

AU DIO OUT

LI NE IN

ToConnectwithanExternalClock

1.UseaBNCcabletoconnect“10MIN”oftheX1sGTand10Moutputofanexternalclock

(eg.auneXC1)

2.TheX1sGTwillautomaticallyidentifiestheexternalclockandthe“B/C”redlightwillbelit

3.UseitasaUSBDACoraCoaxial/OpticalDAC.Pleaserefertothepreviousinstructions

Operation

Instructions

USB

10M IN

COAX

PREAMP OUT

10MOUT

10MIN

aune 430034 WUHAN CHI NA

Email: sales@auneaudio.com Fax: +86-27-85840435 www.auneaudio.com

AUNE X1sGT User manual

AUNE X1sGT User manual

Related papers

Other documents