HuMANDATA LTD.
MAX 10 FPGA Board
ACM-030 Series Rev3
User’s Manual
Ver. 3.0
Table of Contents
Revision History .............................................................................................. 1
Introduction .................................................................................................... 1
1. Specifications ..................................................................................................... 2
2. Overview ............................................................................................................ 3
2.1. Name of Parts .......................................................................................................3
2.2. Block Diagram ......................................................................................................4
2.3. Power Supply ........................................................................................................4
2.4. Clock ......................................................................................................................4
2.5. Setting Switch ......................................................................................................5
2.6. Setting and User Switch ......................................................................................5
2.7. User LED ..............................................................................................................5
2.8. Debug I/F ..............................................................................................................5
2.9. microSD Card Slot ...............................................................................................5
2.10. A/D Conversion Input ........................................................................................6
2.11. JTAG Connector .................................................................................................7
3. FPGA Configuration ........................................................................................... 8
4. Configuration Device Programming ................................................................... 8
4.1. Generating pof file ...............................................................................................8
4.2. Access to built-in Configuration Device ..............................................................8
5. Additional Documentation and User Support ..................................................... 9
Precautions
Do Not
1. This product uses ordinary off-the-shelf electronic components, and is therefore inappropriate for use in
applications that require special quality or reliability and are expected to protect human lives or prevent
accidents, such as safety mechanisms in fields including space, aeronautics, medicine, and nuclear
power.
2. Do not be used underwater or in high-humidity environments.
3. Do not be used in the presence of corrosive gases, combustible gases, or other flammable gases.
4. Do not turn on power when circuit board surface is in contact with other metal.
5. Do not apply voltage higher than rated voltage.
Attention
6. This manual may be revised in the future without notice owing to improvements.
7. All efforts have been made to produce the best manual possible, but if users notice an error or other
problem, we ask that they notify us.
8. Item 7 notwithstanding, HuMANDATA cannot be held liable for the consequences arising from use of
this product.
9. HuMANDATA cannot be held liable for consequences arising from using this product in a way different
from the uses described herein, or from uses not shown herein.
10. This manual, circuit diagrams, sample circuits, and other content may not be copied, reproduced, or
distributed without permission.
11. If the product emits smoke, catches fire, or becomes unusually hot, cut the power immediately.
12. Be careful of static electricity.
13. This product may be subject to the export restrictions of Japan, the United States, or other countries.
Purchasers are responsible for properly observing export restrictions.
14. HuMANDATA firmly refuses to export (including reexporting) products to countries or regions subject to
export restrictions.
Product Warranty and Scope of Support
1. HuMANDATA guarantees that its products can be assembled as shown in published circuit diagrams and other design documents.
There may be differences between actual components or their prescribed quantities and model numbers and those shown in circuit
diagrams.
2. Except for the guarantee in item 1, above, no guarantees whatsoever are made. When assembling the product as shown in a circuit
diagram is impossible, and the problem can be solved by revising the diagram, HuMANDATA will revise the diagram. When a problem
can be solved only by replacing components or modifying the product, HuMANDATA will take back the product to replace it with a
properly functioning product.
3. If the problem is minor, HuMANDATA will sometimes describe how to make the revision or modification, and ask the customer to
solve the problem.
4. HuMANDATA will determine how to honor the warranty, as through repair, replacement, return, or other action. The customer cannot
specify what action to take.
5. FPGAs and other components used in products sometimes have characteristic defects. Returns and replacements are not possible
even if such defects are discovered, whether before or after purchase.
6. HuMANDATA shall not be obligated to inform customers about defects in the main components used in products.
7. HuMANDATA shall not be obligated to provide support for products, or to provide support for the software of other companies needed
to use HuMANDATA products.
8. Published documentation shall be limited to that published by HuMANDATA at the time of product purchase, and HuMANDATA shall
not be obligated to provide any other documentation.
9. When repairs or replacements are provided under warranty in Japan, purchaser shall pay shipping charges for shipping to
HuMANDATA, and HuMANDATA shall pay shipping charges for shipping to purchaser.
10. When shipping from outside of Japan, purchaser shall pay all expenses including shipping charges and taxes.
11. Under whatever circumstances, HuMANDATA shall provide support for its products for a maximum of one year after shipping from
factory.
12. The Warranty is not applicable and support ends in the event of fire, storm and flood damage, earthquakes, lightning strikes, and
other natural disasters, as well as conflict or other occurrences.
13. Purchaser is assumed to have read and understood all the above when purchasing a HuMANDATA product.
Limitation of Liability
1. Purchasers assume all liability associated with the use of this product.
2. HuMANDATA assumes no liability whatsoever for any direct, indirect, special, incidental, or consequential damages arising from the
use of this product, even if HuMANDATA has been advised of the possibility of such damage, whether legal or in tort.
3. At the time this product is purchased, items 1 and 2 above shall be deemed to have been confirmed by purchaser.
Trademarks and Other Considerations
1. This manual uses various companies’ trademarks in places.
2. HuMANDATA is this company’s registered trademark.
HuMANDATA’s Philosophy
1. HuMANDATA endeavors to raise product quality. We continually make detailed improvements and adjustments that are not shown
in circuit diagrams.
2. HuMANDATA actively publishes, on the Web and in other ways, information considered useful to customers. Examples would be
how to use FPGAs and how to use development tools.
3. HuMANDATA makes efforts for the long-term provision of products and for continuing their long-term support.
4. Instead of concealing small product problems and documentation errors, HuMANDATA makes them public
5. HuMANDATA abides by Japanese law and its spirit. We make no transactions with purchasers who commit illegal acts.
1
ACM-030 Series v3.0
Revision History
Date
Revision
Description
Sep. 14, 2023 v3.0 Revised: Product Revision to Rev3
Introduction
Thank you for buying our product ACM-030.
This is an evaluation board equipped with an Intel MAX 10, power, reset, and
clock circuit.
It can provide you with very convenient and easy-to-use development environment.
2
ACM-030 Series v3.0
1. Specifications
Model Name
ACM-030-08 ACM-030-16 ACM-030-25 ACM-030-40 ACM-030-50
FPGA
10M08DAF
484C8G
10M16DAF
484C8G
10M25DAF
484C8G
10M40DAF
484C8G
10M50DAF
484C8G
Power Input
DC 3.3 [V]
User I/Os
100
Config. Device
Integrated
MRAM
MR2A16AMA35 (Everspin, 4Mbit)
On-Board Clock
30 [MHz] (External inputs are available)
A/D Input Channel
8 (parallel with user I/O)
A/D Reference
on-board 2.5 [V]
User LEDs
2
User Switch
2 (Push x 1, Dip x 1bit)
Power-On Reset
240 [ms] typ. (Configuration Reset Signal)
User I/O Connectors
66-pin through-hole
dia. 0.9 [mm], 100[mil]/2.54 [mm] pitch
PCB
6 Layer FR-4 t1.6 [mm] Immersion gold
JTAG Connector
DIL 10-pin socket, 2.54 [mm] pitch
Status LEDs
Power (red), Done (blue)
Dimensions
3.386" x 2.126" (86 x 54 [mm])
Weight
26 [g] typ.
Accessories
DIL 10 long pin header
DIL 80-pin headers (Cuttable) x2
RoHS Compliance
YES
* There may be cases that these parts and specifications are changed.
3
ACM-030 Series v3.0
2. Overview
2.1. Name of Parts
Component Side
Solder Side
User I/O (CNB)
On-board Clock
MRAM
JTAG
FPGA
Setting SW
User SW
User LED
Filters for A/D
Debug I/F
Power LED
User I/O (CNA)
microSD Card Slot
4
ACM-030 Series v3.0
2.2. Block Diagram
2.3. Power Supply
This board operates from single DC 3.3 V power supply from the CNA. Internally
required 2.5[V], and 1.2[V] are generated by on-board voltage regulators.
Power supply for VIO(B) can be input from CNB.
External power supply should be sufficient and stabilized. Please do not apply over
3.3V voltage.
For more details, please refer to circuit schematics and FPGA data sheet.
2.4. Clock
An oscillator, 30 MHz (U10), is equipped as on-board clock. External clock can be
input from user I/O connectors. For more details, please refer to circuit schematics.
MAX 10
10M08DAF484C8G
10M16DAF484C8G
10M25DAF484C8G
10M40DAF484C8G
10M50DAF484C8G
m i croSD
DONE LED User LED
Power LED (3.3V)
Power Circuit
2.5V, 1.2V
User I/Os CNA
50
ACM-030 Rev.D
User I/Os CNB
50
V I O(B) input
3 .3 V input
Oscillator
30
MHz
User Switch
( Push x1, DIP x1)
2
2
MRAM
( 4 M bit)
JTAG
B u ffer 8
A/D I/F
5
ACM-030 Series v3.0
2.5. Setting Switch
MAX10 can store two configuration images in its integrated flash memory.
You can select which image should be used when it is powered up by using
“CONFIG_SEL” signal.
Please refer to the Intel configuration user guide for more details.
SW1
1 2
Signal
CONFIG_SEL
ASW
Function Select Config. Image User
CONFIG_SEL Image
ON (Low)
Image 0
OFF (High) Image 1
2.6. Setting and User Switch
You can use SW1[2] and SW2 for general purpose. They are pulled up, so
you can input low level signal to the FPGA when you push them.
2.7. User LED
You can use D3 and D4 for general purpose. They are active low.
2.8. Debug I/F
These are pads for serial communication. They are connected directly to
FPGA through serial resistance.
2.9. microSD Card Slot
You can insert microSD card and use it for general purpose.
This is a push–push type card slot so you can insert/extract a card by
pushing it.
* HuMANDATA is not involved in microSD card license. Users are
expecting appropriate action. Also we do not provide IP and any other tools.
6
ACM-030 Series v3.0
2.10. A/D Conversion Input
Each of A/D channels shares the connector with a general purpose I/O. Please set
corresponding I/O ports as input or high-impedance mode when you use A/D function.
Connector
A/D Input parallel connected General I/O
Net Label FPGA Pin Net Label FPGA Pin
CNA[57]
ADIN1
F5
IOA40
B4
CNA[58]
ADIN2
F4
IOA41
B3
CNA[59]
ADIN3
J8
IOA42
A3
CNA[60]
ADIN4
J9
IOA43
A2
CNA[61]
ADIN5
J4
IOA44
G17
CNA[62]
ADIN6
H3
IOA45
H17
CNA[63]
ADIN7
K5
IOA46
L15
CNA[64]
ADIN8
K6
IOA47
L14
Input Circuit in each Channel
Resisters (R31 – R38) and capacitors (C15 – C22) can be modified to adjust input
characteristics.
Factory setting: resisters = 100 ohm, capacitors = unmounted
7
ACM-030 Series v3.0
2.11. JTAG Connector
This connector is used to configure the FPGA and to access to configuration device
in system. Pin assignment is as follows.
CN1
Signal Name
JTAG Pin
Signal Name
TCK
1
2
GND
TDO 3 4 VCC
TMS
5
6
-
- 7 8 -
TDI
9
10
GND
8
ACM-030 Series v3.0
3. FPGA Configuration
To configure the FPGA via JTAG, select FPGA icon detected by [Auto Detect] and
assign a sof file.
If configuration is completed successfully, the DONE LED will light up.
4. Configuration Device Programming
To download an FPGA configuration data to the built-in configuration device, pof
file is required.
To generate a pof file using Quartus II, please refer to the following steps.
4.1. Generating pof file
Start Quartus II, and open [File] menu and click [Convert Programming Files]
and set items as shown below.
Programming File Type : Programmer Object File (.pof)
Configuration Device : EPCE*
Mode : Internal Configuration
File name : any
1. Open [SOF Data] and Click [Add File…], then select the sof file.
2. Click [Generate]
4.2. Access to built-in Configuration Device
Please set configuration mode switch to AS mode.
Click [Add File…] and select the jic file, then check [Program/Configure] and
click [Start].
1. Open [Add File…], then select the pof file.
2. Check [Program/Configure], then click [Start].
MAX10 FPGA Board
ACM-030 Series Rev3
User’s Manual
Ver. 3.0 .................................. September 14, 2023
HuMANDATA LTD.
Address: 1-2-10-2 F, Nakahozumi, Ibaraki
Osaka, Japan
ZIP 567-0034
Tel: 81-72-620-2002 (Japanese)
Fax: 81-72-620-2003 (Japanese/English)
URL: http://www2.hdl.co.jp/en/ (Global)
http://www.hdl.co.jp (Japan)
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Humandata ACM-110-08 User manual
-
Humandata ACM-031Y-16 User manual
-
Humandata ACM-031Y-16 User manual
-
Humandata ACM-109-A4 User manual
-
Humandata ACM-031-16 User manual
-
Humandata ACM-027Z-A4 User manual
-
Humandata ACM-201-35C8 User manual
-
Humandata ACM-205-115C8 User manual
-
Humandata ACM-202-120C8 User manual
-
Humandata ACM-028-A7 User manual
