Black & Decker LE4 User manual

Page is loading ...

Intended use

Your BLACK+DECKER™ torch has been

designed for providing illumination. This

tool is intended for professional and private,

non professional users.

Safety instructions

General power tool safety warnings

Warning! Read all safety warnings

and all instructions. Failure to

follow the warnings and

instructions listed below may result in

electric shock, ﬁre and/or serious injury.

Save all warnings and instructions for future

reference. The term "power tool" in all of the

warnings listed below refers to your mains

operated (corded) power tool or battery

operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b. Do not operate power tools in explosive

atmospheres, such as in the presence of

ﬂammable liquids, gases or dust. Power

tools create sparks which may ignite the

dust or fumes.

c. Keep children and bystanders away while

operating a power tool. Distractions can

cause you to lose control.

2. Electrical safety

a. Power tool plugs must match the outlet.

Never modify the plug in any way. Do not

use any adapter plugs with earthed

(grounded) power tools. Unmodiﬁed

plugs and matching outlets will reduce

risk of electric shock.

b. Avoid body contact with earthed or

grounded surfaces such as pipes,

radiators, ranges and refrigerators. There

is an increased risk of electric shock if

your body is earthed or grounded.

c. Do not expose power tools to rain or wet

conditions. Water entering a power tool

will increase the risk of electric shock.

d. Do not abuse the cord. Never use the

cord for carrying, pulling or unplugging

the power tool. Keep cord away from

heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the

risk of electric shock.

e. When operating a power tool outdoors,

use an extension cord suitable for

outdoor use. Use of a cord suitable for

outdoor use reduces the risk of electric

shock.

f. If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply.

Use of an RCD reduces the risk of electric

shock.

3. Personal safety

a. Stay alert, watch what you are doing and

use common sense when operating a

power tool. Do not use a power tool while

you are tired or under the inﬂuence of

drugs, alcohol or medication. A moment

of inattention while operating power tools

may result in serious personal injury.

b. Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid

safety shoes, hard hat, or hearing

protection used for appropriate

conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure the

switch is in the o-position before

connecting to power source and/or

battery pack, picking up or carrying the

tool. Carrying power tools with your

ﬁnger on the switch or energising power

tools that have the switch on invites

accidents.

d. Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a

rotating part of the power tool may result

in personal injury.

4

ENGLISH

e. Do not overreach. Keep proper footing

and balance at all times. This enables

better control of the power tool in

unexpected situations.

f. Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from moving

parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g. If devices are provided for the

connection of dust extraction and

collection facilities, ensure these are

connected and properly used. Use of

dust collection can reduce dust-related

hazards.

4. Power tool use and care

a. Do not force the power tool. Use the

correct power tool for your application.

The correct power tool will do the job

better and safer at the rate for which it

was designed.

b. Do not use the power tool if the switch

does not turn it on and o. Any power

tool that cannot be controlled with the

switch is dangerous and must be

repaired.

c. Disconnect the plug from the power

source and/or the battery pack from the

power tool before making any

adjustments, changing accessories, or

storing power tools. Such preventive

safety measures reduce the risk of

starting the power tool accidentally.

d. Store idle power tools out of the reach of

children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands

of untrained users.

e. Maintain power tools. Check for

misalignment or binding of moving

parts, breakage of parts and any other

condition that may aect the power tools

operation. If damaged, have the power

tool repaired before use. Many accidents

are caused by poorly maintained power

tools.

f. Keep cutting tools sharp and clean.

Properly maintained cutting tools with

sharp cutting edges are less likely to bind

and are easier to control.

g. Use the power tool, accessories and tool

bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to be

performed. Use of the power tool for

operations dierent from those intended

could result in a hazardous situation.

5. Battery tool use and care

a. Recharge only with the charger speciﬁed

by the manufacturer. A charger that is

suitable for one type of battery pack may

create a risk of ﬁre when used with

another battery pack.

b. Use power tools only with speciﬁcally

designated battery packs. Use of any

other battery packs may create a risk of

injury and ﬁre.

c. When battery pack is not in use, keep it

away from other metal objects, like paper

clips, coins, keys, nails, screws, or other

small metal objects, that can make a

connection from one terminal to another.

Shorting the battery terminals together

may cause burns or a ﬁre.

d. Under abusive conditions, liquid may be

ejected from the battery; avoid contact.

If contact accidentally occurs, ﬂush with

water. If liquid contacts eyes, additionally

seek medical help. Liquid ejected from

the battery may cause irritation or burns.

5

ENGLISH

6

ENGLISH

6. Service

a. Have your power tool serviced by a

qualiﬁed repair person using only

identical replacement parts. This will

ensure that the safety of the power tool

is maintained.

Additional power tool safety warnings

Warning! Additional safety

warnings for torches

• Never attempt to remove or replace any

parts other than those speciﬁed in this

manual.

• Do not operate without the lens in place

or with a damaged lens.

• Never look directly into the light or shine

the light into another persons eyes.

Warning! Fire hazard.Do not

operate worklight or charger near

ﬂammable liquids or in gaseous or

explosive atmospheres. Internal sparks may

ignite fumes causing personal injury.

• Do not expose light or charger to wet or

damp areas. Do not expose light or

charger to rain or snow.

• Do not wash light or charger with water

or allow water to get inside light or

charger. Do not submerge light in water

at any time.

Caution! When not in use, place

tool on its side on a stable surface

where it will not cause a tripping

or falling hazard. Some tools with large

battery packs will stand upright on the

battery pack but may be easily knocked

over.

• Never view directly with optical

instruments into the light source.

Residual risks

Additional residual risks may arise when

using the tool which may not be included in

the enclosed safety warnings. These risks

can arise from misuse, prolonged use etc.

Even with the application of the relevant

safety regulations and the implementation

of safety devices, certain residual risks can

not be avoided. These include:

• Injuries caused by touching any

rotating/moving parts.

• Injuries caused when changing any parts,

blades or accessories.

• Injuries caused by prolonged use of a

tool. When using any tool for prolonged

periods ensure you take regular breaks.

• Impairment of hearing.

• Health hazards caused by breathing dust

developed when using your tool

(example:- working with wood, especially

oak, beech and MDF.)

Labels on tool

The following pictograms are shown on the

tool:

Warning! To reduce the risk of injury,

the user must read the instruction

manual.

Additional safety instructions for

batteries and chargers

Batteries

• Never attempt to open for any reason.

• Do not expose the battery to water.

• Do not store in locations where the

temperature may exceed 40 °C.

• Charge only at ambient temperatures

between 10 °C and 40 °C.

• Charge only using the charger provided

with the tool.

• When disposing of batteries, follow the

instructions given in the section

"Protecting the environment".

Do not attempt to charge damaged

batteries.

Chargers

• Use your BLACK+DECKER charger only

to charge the battery in the tool with

which it was supplied. Other batteries

could burst, causing personal injury and

damage.

• Never attempt to charge

non-rechargeable batteries.

• Have defective cords replaced

immediately.

• Do not expose the charger to water.

• Do not open the charger.

• Do not probe the charger.

The charger is intended for indoor

use only.

Read the instruction manual before

use.

Electrical safety

This tool is double insulated;

therefore no earth wire is

required. Always check that the

power supply corresponds to the voltage

on the rating plate.

• If the supply cord is damaged, it must be

replaced by the manufacturer or an

authorised Black & Decker Service

Centre in order to avoid a hazard.

Features

1. Pivot

2. Pivoting 24 - LED adjustable lamp

3. Carrying handle

4. On/o button (Fixed 9 - LED lamp)

5. On/o button

(Pivoting 24 - LED adjustable lamp)

6. Fixed 9 - LED lamp

7. Battery lead

8. Charger

9. Charging indicator

Use

Warning! Let the tool work at its

own pace. Do not overload.

Charging the battery

The battery needs to be charged before ﬁrst

use and whenever it fails to produce

sucient power on jobs that were easily

done before.

The battery may become warm while

charging; this is normal and does not

indicate a problem

Warning: Do not charge the battery at

ambient temperatures below 10 °C or above

40 °C. Recommended charging

temperature: approx. 24 °C.

Note: The charger will not charge a battery

if the cell temperature is below

approximately 0 °C or above 40 °C.

The battery should be left in the charger

and the charger will begin to charge

automatically when the cell temperature

warms up or cools down.

• To charge the unit. Plug into a power

supply(AC power),The red charge

indicator (9) shows that the lamp is

charging successfully.

7

ENGLISH

8

ENGLISH

Leaving the battery in the charger

The charger and battery pack can be left

connected with the LED glowing

indeﬁnitely. The charger will keep the

battery pack fresh and fully charged.

Switching on and o (Fig 2)

• To switch the ﬁxed 9 - LED lamp (6) on

press the switch (4).

• To switch the ﬁxed 9 - LED lamp (6) oﬀ

depress the switch (4).

• To switch the pivoting 24 - LED

adjustable lamp (2) on press the switch

(5).

• To switch the pivoting 24 - LED

adjustable lamp (2) depress the switch

(5).

The pivoting 24 - LED adjustable lamp

For your convienience, the pivoting 24 -

LED adjustable lamp (2) can be pivoted into

a range of positions (Fig1)

Maintenance

Your BLACK+DECKER tool has been

designed to operate over a long period of

time with a minimum of maintenance.

Continuous satisfactory operation depends

upon proper tool care and regular cleaning.

Your charger does not require any

maintenance apart from regular cleaning.

Warning! Before performing any

maintenance on the tool, unplug

the charger before cleaning it.

• Regularly clean the ventilation slots in

your tool using a soft brush or dry cloth.

• Regularly clean the motor housing using

a damp cloth.

• Do not use any abrasive or

solvent-based cleaner.

LE4

Input voltage VdC 220-240

Power input W 4

Net weight kg 1.4

Technical Data

Protecting the environment

Separate collection. This product must

not be disposed of with normal

household waste.

Should you ﬁnd one day that your

Black+Decker product needs replacement,

or if it is of no further use to you, do not

dispose of it with other household waste.

Make this product available for separate

collection.

• Black+Decker provides a facility for

recycling Black+Decker products once

they have reached the end of their

working life. This service is provided free

of charge. To take advantage of this

service please return your product to any

authorised repair agent who will collect

them on our behalf.

• You can check the location of your

nearest authorised repair agent by

contacting your local Black+Decker

oce at the address indicated in this

manual. Alternatively, a list of authorized

Black+Decker repair agents and full

details of our after-sales service and

contact are available on the Internet at:

www.2helpU.com.

9

ENGLISH

Warranty

Black+Decker is conﬁdent of the quality of

its products and oﬀers an outstanding

warranty.

This warranty statement is in addition to and

in no way prejudices your statutory rights.

The warranty is valid within Middle East &

Africa regions.

If a Black+Decker product becomes

defective due to faulty materials,

workmanship or lack of conformity, within

24 months from the date of purchase,

Black+Decker warranty to replace defective

parts, repair products subjected to fair wear

and tear or replace such products to ensure

minimum inconvenience to the customer

unless:

The product has been used for

trade, professional or hire

purposes;

The product has been subjected to

misuse or neglect;

The product has sustained damage

through foreign objects,

substances or accidents;

Repairs have been attempted by

persons other than authorised

repair agents or Black+Decker

service staﬀ.

To claim on the warranty, you will need to

submit proof of purchase to the seller or an

authorised repair agent. You can check the

location of your nearest authorised repair

agent by contacting your local

Black+Decker oce at the address

indicated in this manual.

Alternatively, a list of authorised

Black+Decker repair agents and full details

of our after-sales service and contacts are

available on the Internet at:

www.2helpU.com.

Page is loading ...

ALGERIA: Sarl Outillage Corporation, DW, B&D Pet, HHD, 08, Rue Med Boudiaf (ex TELLA Achen) Cheraga, Alger, Tel:

00213-0-21375130/ 00213-0-21375131, Fax: 00213-0-21369667, Email: [email protected];

neﬁ[email protected]; [email protected]. AZERBAIJAN: Kontakt - NN LLC, HHD, M.Qashqay 43, Baku

Azerbaijan Az1000, Tel: 00994 12 408 20 50, Mob: +994503442204, Fax: 00994 12 411 70 90, [email protected]. BAHRAIN: Alfouz

Services Co. WLL, Tubli, DW, B&D PET, HHD, P.O. Box 26562, Tubli, Manama, Tel: +973-17783562/ 17879987, Fax: 17783479, Email:

[email protected]. EGYPT: Anasia Egypt for Trading S.A.E. (Mentrade), HHD, P.O. Box 2443, 9, Mostafa Refaat Street, Sheraton

Heliopolis 11361, Cairo, Tel: 00202 22684159, Fax: 00202 22684169, Email: [email protected]; [email protected].

ETHIOPIA: Seif Tewﬁk Sherif, DW, B&D PET, HHD, Arada Sub City, Kebele 01/02, Global Insurance Bldg, 2nd Flr, Room 43, P.O. Box

2525, Addis Ababa, Tel: 00-251-11-1563968/ 1563969, Fax: 00-251-11-1558009, Email: [email protected]; [email protected];

[email protected]. IRAQ: Financial Links, B&D PET, HHD, Kazzaz Building Arasat Al-Hindia, Block No: 629, Street: 31, Building No:

1, Baghdad, Iraq, Tel: 00964-(0)780-195-2223/ +964-(0)781-3763044, Email: info@ﬁnanciallinks-truevalue.com. JORDAN: Bashiti

Hardware (Palestine), B&D pet, HHD, "93 King Abdullah, 2nd St., Opp ELBA House, P.O. Box 3005, Amman 11953, Tel:

00962-6-5349098, ext.11, Fax: 00962-6-5330731, Email: [email protected]; [email protected];

[email protected]. KENYA: Zylog Enterprises Ltd. (T/A Leading Concepts), HHD, IPS Building,Kaunda Street, P.O. Box

40877-00100, Nairobi, Tel: 00254-20-6905000, Fax: 00254-20-6905111, Email: admin@alibhaishariff.co.ke;

[email protected]; [email protected]. LEBANON: Aces Service Centre (Est. F.A.Ketaneh SA), HHD, P.O. Box 90-102,

Nahr El Mot, Seaside Highway, Pharaon Building, Beirut, Tel: 00961-1-898989/ + 961-(1)-262626, Fax: 0096-1-1245880, Email:

[email protected]; [email protected]; Johnny[email protected]; [email protected]. LIBYA: North Africa

Trading (El Ghoul Brothers), DW, B&D Pet, HHD, P.O. Box 348, 7 October Street 11, Benghazi, Tel: 00218-061-3383994, Fax:

00218-092-7640688, Email: [email protected]; CC: [email protected]; elghol@technpower.com. North Africa Trading ( El Ghoul

Brothers), DW, B&D Pet, HHD, AlBarniq Dewalt Center, Mokhazin-elsukar St., ElFallah, Tripoli, Tel: 00218-021-3606430, Fax:

00218-092-6514813, Email: [email protected]; cc: ([email protected]; elghol@technpower.com. Homeworld Co., HHD, Senidal St.

Amr Ibn Elaas Road, Benghazi, Libya, P.O. Box 18182, Salmany, Tel: 00218-61-9094183, ext. 103, Fax: 00218.61.9094123, ext. 108,

Email: [email protected]. MAURITIUS: J.M. Goupille & Co.Ltd. The Brandhouse Ltd., HHD, Rogers Industrial Park 1, Riche Terre,

Mauritius, Tel: 00230-2069450/ +230-207-1700, Fax: 00230-2483188/ 00230-2069474, Email: claims([email protected];

[email protected]; [email protected]; [email protected], [email protected]; Cc.

[email protected]; [email protected]; [email protected]. MOROCCO: UATS, HHD, "No. 37,

Lotissement KADIRIA, km 10 Route, Eljadida, LISASSFA, Casablanca, Morocco, Tel: 00212-522652602, Fax: 00212-522652603, Email:

[email protected]; [email protected]. OMAN: Oman Marketing & Service Co.(Omasco), Wattayah/ Muscat, HHD, B&D

PET, P.O. Box 2734, Behind Honda Showroom, Wattayah, Oman, Tel: +968 24560232/ 24560255, Fax: 24560993, Email:

[email protected]; Cc. [email protected], [email protected]; [email protected].

Oman Marketing & Service Co.(Omasco), Sohar, HHD, B&D PET, Al Ohi, Sohar, Oman, Tel: +968 26846379, Fax: 26846379, Email:

[email protected]. Oman Marketing & Service Co.(Omasco), Salalah, HHD, B&D PET, Sanaya, Salalah, Oman, Tel: +968

23212290, Fax: 23210936, Email: [email protected]. Omar Mohammed Ali Bawain Trading Co., Salalah, Al-Awqadain, PC

217, P.O.Box 112, Salalah, Sultanate of Oman, Tel: +968 23214874, Fax: 23214874/ 23211878, Email: [email protected]. PAKISTAN:

Ammar Service & Spares, B&D PET, HHD, Ofﬁce No 6068, 6th Floor Central Plaza, Behind Gul Plaza Marston Road, Karachi, Tel:

0092-21-32426905/ 021-32775252, Fax: 0092-21-32427214, Email: [email protected]. QATAR: Al Muftah Service Centre, Doha,

HHD, B&D PET, Al Wakrah, Road, P.O. Box 875, Doha, Qatar, Tel: +974 44650880/ 44650110/ 44446868, Fax: 44441415/ 44662599,

Email: [email protected]; [email protected]. SAUDI ARABIA: Fawaz Ebrahim Al Zayani Trading Est., Dammam, DW, B&D

PET, HHD, P.O. Box 76026, Al Raka: 31952, Tel: +966-3-8140914, Fax: 8140824, Email: [email protected];

([email protected]); Website: www.fawazalzayanigroup.com. Fawaz Ebrahim Al Zayani Trading Est., Makkah, DW, B&D PET,

HHD, 4753-Wali Alahed, Makkah, 9130-24353 Tel: +966-12-8140914/ 581121778, Fax: 128140914, Email: [email protected].

Banaja Trading Co. Ltd., Riyadh, HHD, P.O. Box 566, Riyadh-11421, Tel: +966-1-4124444, Fax: 4033378, Email: [email protected].

Banaja Trading Co. Ltd, Jeddah, HHD P.O. Box 366, Jeddah-21411, Tel: +966-2-6511111, Fax: 6503668, Email: [email protected];

[email protected]. SOUTH AFRICA: Benray Tool Wholesalers C.C., B&D PET, HHD, 460 Koeberg Road, Cape Town, South Africa,

Tel: 021-551-7244, Fax: 021-552-6395, Email: [email protected]. Stanley Black & Decker-RSA, BED, PET, HHD, 199 Winze Drive

Stormill Ext 9 Roodepoort Tel: (2711) 472-0454, Fax: (2711) 472-0482, Email: [email protected]; [email protected];

[email protected]. SRI LANKA: Delmege Forsyth & Co. Ltd, DW, B&D Pet, HHD, Delmege Forsyth & Co. Ltd, Lifestyle

Cluster, 101, Vinayalankara Mawatha, Colombo 10, Sri Lanka, Tel: +94-11-2688462/ +94-11-2, Email: [email protected];

[email protected] cc: [email protected]. TUNISIA: Societe Tunisienne De Maintenance (STM), B&D Pet,

HHD, Rue De La Physique. Nouvelle Zone Industrielle Ben Arous.2013 Ben Arous, TUNISIA. Tel: +216-79-389687, Fax: +216-71-385154,

Email: [email protected]. UAE: (Abu Dhabi) Galaxy Equipment Trading, Abu Dhabi, DW, B&D PET, HHD, Madinath Zayed (Baada

Zaid), Abu Dhabi P.C. 58910, Tel: +971-2-8844279, Fax: 8844297, Email: [email protected]; [email protected]. Light House

Electrical, Abu Dhabi, DW, B&D PET, HHD, P.O. Box 120, Abu Dhabi, Tel: +971-2-6726131, Fax: 6720667, Email:

[email protected]. Light House Electrical, Musaffah, DW, B&D PET, HHD, P.O. Box 120, Abu Dhabi, Tel: +971-2-5548315, Fax:

5540461, Email: [email protected]. (Al Ain) Zillion Equipment and Spare Parts Trading LLC. Al Ain, DW, B&D PET, HHD, P.O. Box

19740, Opp. Bin Sadal/ Trimix Redymix Sanaiya, Al Ain Tel: +971-3-7216690, Fax: 7216103, Email: [email protected]. (Dubai)

BLACK & DECKER (OVERSEAS) GmbH, Dubai, DW, B&D PET, HHD, P.O. Box 5420, Dubai, Tel: +971-4-8127400/ 8127406, Fax:

2822765, Email: [email protected]. (Ras Al Khaimah) Mc Coy Middle East LLC, Ras Al Khaimah, DW, B&D PET, HHD, P.O. Box

10584, Ras Al Khaimah, Tel: +971-7-2277095, Fax: 2277096, Email: [email protected]. (Sharjah) Mc Coy Middle East LLC, Sharjah,

DW, B&D PET, HHD, P.O. Box 25793, Sharjah, Tel: +971-6-5395931, Fax: 5395932, Email: [email protected];

[email protected]. UGANDA: Anisuma Investment & Service Ltd. (Jacky's Electronics), HHD, J.R Comples, Ware house No.5,

Plot No.101. 3rd Industrial Area, Jinja Rd, Kampala, Tel: 00256-414237106, Mob: 00256 779429501, Email:

[email protected]. YEMEN: Middle East Trading Co. (METCO) DW, B&D Pet, HHD, 5th Flr. Hayel Saeed Anam Bldg.

Al-Mugamma St. Taiz, Yemen, Tel: +00967-4-213455, Fax: 00967-4-219869, Email: [email protected]; [email protected].

Middle East Trading Co. (METCO) DW, B&D Pet, HHD, Mualla Dakka, Aden, Tel: 00967-2-222670, Fax: 00967-2-222670,

[email protected]; [email protected]. Middle East Trading Co. (METCO), DW, B&D Pet, HHD, Hayel st., Sana'a, Yemen,

Tel: 00967-1-204201, Fax: 00967-1-204204, Email: [email protected]; [email protected].

Names & Addresses for Black & Decker Service Concessionaries

Page is loading ...

Black & Decker LE4 User manual

Black & Decker LE4 User manual

in other languages

Related papers

Other documents