Digicom Vepro Remote Videoalarm User manual

Digicom
Brand
Digicom
Model
Vepro Remote Videoalarm
Type
User manual

This manual is also suitable for

Digicom Vepro Remote Videoalarm

The Digicom Vepro Remote Videoalarm is a cutting-edge security system that offers a wide range of features to protect your home or business. With its built-in communication module, you can remotely control your system and receive alerts in case of an emergency. The system also includes support for up to 4 IP video cameras, allowing you to monitor your property in real time. Additionally, the Vepro can manage up to 20 wireless sensors, giving you comprehensive coverage of your premises.

Here are some of the key features of the Digicom Vepro Remote Videoalarm:

Digicom Vepro Remote Videoalarm

The Digicom Vepro Remote Videoalarm is a cutting-edge security system that offers a wide range of features to protect your home or business. With its built-in communication module, you can remotely control your system and receive alerts in case of an emergency. The system also includes support for up to 4 IP video cameras, allowing you to monitor your property in real time. Additionally, the Vepro can manage up to 20 wireless sensors, giving you comprehensive coverage of your premises.

Here are some of the key features of the Digicom Vepro Remote Videoalarm:

For further information visit our
website
http://www.digicom.it
VEPRO 16/10/2008
Remote Videoalarm
VEPRO
l EDGE/GSM or LAN Remote Alarm System
l Built-in communication module
l Wireless LAN connection
l Up to 4 IP Videocameras (Wi-Fi or LAN) management
l Up to 20 433MHz wireless sensors management
l Pre and post alarm image management
DESCRIPTION
VEPRO System is the Digicom’s innovative solution for the remote
control and videoalarm.
A cutting edge solution of security projected and carried out by Digicom
to build a wireless videoalarm system with EDGE, GPRS or LAN
connectivity.
All the Vepro tecnology is mainly based on the concentrator, with
Gateway functions, that is able to monitor up to 4 IP videocameras
(via Wi-Fi or LAN) and up to 20 intelligent sensors (Smart series).
The concentrator is equipped with a Class 10 EDGE/GPRS
communication device that allows the remote control of the installation
status and to send the alarms to the headquarter.
The system is composed by Wi-Fi IP videocameras (IP Camera 300), by
wireless sensors and by backup systems to guarantee the operation
even when power is off.
The 433MHz wireless sensors are continuously
controlled by the concentrator that sends scheduled
SMS and checks the battery charge. Each sensor is
unique of its kind (as in high level alarm systems) and
allows an exact identication of the alarm zone.
The latest generation IP videocameras can operate by day and night as they are equipped
with a light sensor and an infrared led. Furthermore they can manage the Duplex function with
a double ow of images both in photo format (JPG) and in streaming in MPEG-4 format. The
videocamera can be supplied with a battery back-up device to guarantee the operation even when
power is off.
Security
For further information visit our
website
http://www.digicom.it
Vepro constantly controls the presence of sensors
and videocameras and in case of alarm (generated by
sensors), it captures the images coming before and
after the alarm and sends them immediately to the
control center to analyse the situation.
Vepro can be used also as a local videosurveillance
system togheter with a specic storage unit equipped
with an hard-disk.
In this way all the system can be remote viewed, at
any time,through the EDGE connection or via LAN
(for example through the ADSL router).
The surveillance center can display on the PC the events
that caused the alarm or verify the live situation.
If a broadband connection is available (ADSL, UMTS),
also the remote listening will be possible through the
microphone on the videcamera.
TECHNICAL FEATURES
l Built-in Class 10 EDGE/GPRS communication device
l Built-in 54 Mbps Wi-Fi module
l Built-in 433 MHz receiver
l 1 input
l 1 output
l Management of I/O input for alarms and activations
l Mailing of Pre & Post alarm images
l Management of MJPEG images
l Images resolution: 640 x 480 pixel max
l Management of up to 4 Wi-Fi videcameras (54 Mbps)
l Management of up to 20 SMART sensors
l Anti-Tamper
l 10/100 4 ports switch
l Internal Back-up Battery
l Built-in sound buzzer
SMART SENSOR
l 433 MHz Wireless sensor
l Wired magnetic REED
l Vertical TILT sensor
l Sensors status check (magnetic and TILT) every seconds
l Alive message every 30 seconds
l Unique sensor via MAC address
l Battery low indication
l Long-Life battery (more than 1 year)
IP Camera 300
Smart Sensor
Vepro
Control Center
(MPEG-4)
Images Storage Server
(FTP Server)
INTERNET
EDGE/GPRS
  • Page 1 1
  • Page 2 2

Digicom Vepro Remote Videoalarm User manual

Digicom
Brand
Digicom
Model
Vepro Remote Videoalarm
Type
User manual
This manual is also suitable for

Digicom Vepro Remote Videoalarm

The Digicom Vepro Remote Videoalarm is a cutting-edge security system that offers a wide range of features to protect your home or business. With its built-in communication module, you can remotely control your system and receive alerts in case of an emergency. The system also includes support for up to 4 IP video cameras, allowing you to monitor your property in real time. Additionally, the Vepro can manage up to 20 wireless sensors, giving you comprehensive coverage of your premises.

Here are some of the key features of the Digicom Vepro Remote Videoalarm:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents