Behringer PB600 Product information

Product Information Document

Universal E ects Pedal Floor Board with

9 V DC Power Supply and Patch Cables

Guitar Stompboxes

Ultra-compact and lightweight

pedal board for transporting

up to 6 e ects pedals,

including patchcables

Generous 1.7 A power adapter

included for powering

more than 12devices*—

includes 1 x 6 daisy-chain cabling

Ultra-rigid plastic design withstands

even heavy impact

3-Year Warranty Program*

Conceived and designed by

BEHRINGER Germany

It’s All About Connections

This pedal board makes hooking up six

2.5" x 4.5" pedals as easy as hooking up just

one (of course, if you’re using pedals that

aren’t 2.5" x 4.5", the snug foam padding can

be cut to accommodate pedals of varying

shapes). The PB600 includes ¼ " patch cables,

so you can leave your pedals connected to one

another, ready to pass signal even when you’re

transporting them. It also comes with 1 x 6

daisy-chain cabling, so that when you plug in

the 1.7 A power adapter, all your pedals receive

power. Meanwhile, all cabling remains safe

and free of strain. With the PB600 – your e ects

chain is always safe and organized.

Love your e ects pedals? Then show

them some love! The PB600 protects

up to 6 of your favorite stomps, and

keeps them ready to rock at a moment’s

notice. This rugged suitcase-style

pedal board comes with everything

you need, including an integrated

power supply and enough audio and

power cables to interconnect up to

6 devices. The removable cover can

even be locked (locks not included)

for a double layer of protection.

*Not Included

*Warranty details can be found at music-group.com.

2 of 5

Product Information Document

Universal E ects Pedal Floor Board with

9 V DC Power Supply and Patch Cables

Guitar Stompboxes

The Ins and Outs

Connect your guitar, bass or keyboard to the single ¼ " input in the upper right corner of the board.

A pair of ¼ " From E ects jacks in the upper left corner allow you to connect stereo e ects, and two

¼ " Output To Amp jacks send a left and right stereo signal to up to two amps.

When it is time to load out, just unplug the power supply, disconnect your guitar and amp, put the

lid back on the PB600 and slide the locking latches back into place. The high-impact plastic casing

will protect your pedals from the rigors of the road.

You Are Covered

We always strive to provide the best possible Customer Experience. Our products are made in our

own MUSIC Group factory using state-of-the-art automation, enhanced production work ows and

quality assurance labs with the most sophisticated test equipment available in the world. As a result,

we have one of the lowest product failure rates in the industry, and we con dently back it up with a

generous 3-Year Warranty program.

Value

You have invested considerable time and money into your skills and your e ects chain. Keep those

pedals safe and sounding great with the PB600 – and by all means, keep the party going! Check out

the PB600 at your nearest BEHRINGER dealer, or order yours online today!

3 of 5

Product Information Document

Universal E ects Pedal Floor Board with

9 V DC Power Supply and Patch Cables

Guitar Stompboxes

4 of 5

Product Information Document

Universal E ects Pedal Floor Board with

9 V DC Power Supply and Patch Cables

Guitar Stompboxes

For service, support or more information contact the BEHRINGER location nearest you:

Europe

MUSIC Group Services UK

Tel: +44 156 273 2290

Email: [email protected]

USA/Canada

MUSIC Group Services NV Inc.

Tel: +1 702 800 8290

Email: [email protected]

Japan

MUSIC Group Services JP K.K.

Tel.: +81 3 6231 0454

Email: [email protected]

MUSIC Group accepts no liability for any loss which may be su ered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein.

Technical speci cations, appearances and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK,