Pittsburgh 62569 Digital Caliper offers precise measurements in inches (decimals or fractions), millimeters, and metric with an accuracy of ±0.001". Ideal for measuring inside, outside, depth, and step dimensions, it features a large LCD display for easy reading. This versatile tool automatically powers on/off and includes a convenient thumb knob for precise jaw adjustment and a zero reset button for easy calibration.
Pittsburgh 62569 Digital Caliper offers precise measurements in inches (decimals or fractions), millimeters, and metric with an accuracy of ±0.001". Ideal for measuring inside, outside, depth, and step dimensions, it features a large LCD display for easy reading. This versatile tool automatically powers on/off and includes a convenient thumb knob for precise jaw adjustment and a zero reset button for easy calibration.
Visit our website at: http://www.harborfreight.com
Email our technical support at: [email protected]
REV 14l
Owner’s Manual & Safety Instructions
Save This Manual Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright
©
2014 by Harbor Freight Tools
®
. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product
described herein. Tools required for assembly and service may not be included.
Read this material before using this
product. Failure to do so can result in
serious injury. SAVE THIS MANUAL.
Page 2 For technical questions, please call 1-888-866-5797. Item 62569
Specifications
Display Units Inches (Decimals), Inches (Fractions), & Millimeters
Accuracy ±0.001" (0.025mm)
Resolution 0.0005", 1/128", 0.01mm
Power Supply LR44 Button Battery (Included)
Important Safety Information
1. CONTAINS BUTTON BATTERY.
Keep out of your child’s reach.
Discard button batteries carefully.
Do not allow children to play with
devices that contain button batteries.
This product is not a toy.
2. Wear ANSI-approved
safety goggles during use.
3. Keep work area clean and well lit.
4. Do not operate when tired or
when under the influence of
alcohol, drugs or medication.
5. Use as intended only.
6. Inspect before every use; do not use
if parts are loose or damaged.
7. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
Components and Controls
inch/F
OFF
ON
ZERO
mm
OFF
ON
ZERO
OFF ON
Button
mm inch/F
Button
ZERO
Button
Battery
Cover
Thumb
Knob
Lock Screw
Bottom
Jaws
Top
Jaws
Record Product’s Serial Number Here:
Note: If product has no serial number, record month and year of purchase instead.
Page 3For technical questions, please call 1-888-866-5797.Item 62569
Instructions
1. Press OFF ON Button, or move the
Jaws to automatically turn caliper on.
2. To toggle measurement between
millimeter, inches and fractions,
press mm inch/F Button.
Note: When the unit is turned on, the most
recent measurement will be displayed.
3. Turn Thumb Knob to close the Jaws, then
press ZERO Button to set display to 0.
4. To measure outside of object,
set the Bottom Jaws outside
object being measured. Slide the Jaws
together until they gently contact the object.
5. To measure inside of object, set the
top Jaws inside object being measured.
Spread Jaws apart until they
gently contact the object.
6. When finished, press OFF ON Button
to turn off caliper. The unit will also
automatically shut off if left idle.
7. To replace battery, slide open battery
compartment, remove old battery, install
new battery positive (flat) side up, then
slide Battery Cover back into place.
Note: Replacement parts are not available.
inch/F
OFF
ON
ZERO
mm
OFF
ON
ZERO
inch/F
OFF
ON
ZERO
mm
OFF
ON
ZERO
Outside Measurement Inside Measurement
inch/F
OFF
ON
ZERO
mm
OFF
ON
ZERO
inch/F
OFF
ON
ZERO
mm
OFF
ON
ZERO
Depth Measurement Step Measurement
Limited 90 Day Warranty
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase.
This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence
or accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death,
injuries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to you.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us
with transportation charges prepaid. Proof of purchase date and an explanation
of the complaint must accompany the merchandise. If our inspection verifies the
defect, we will either repair or replace the product at our election or we may elect
to refund the purchase price if we cannot readily and quickly provide you with a
replacement. We will return repaired products at our expense, but if we determine
there is no defect, or that the defect resulted from causes not within the scope
of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • 1-888-866-5797
-
1
-
2
-
3
-
4
Pittsburgh 62569 Owner's manual
- Type
- Owner's manual
- This manual is also suitable for
Pittsburgh 62569 Digital Caliper offers precise measurements in inches (decimals or fractions), millimeters, and metric with an accuracy of ±0.001". Ideal for measuring inside, outside, depth, and step dimensions, it features a large LCD display for easy reading. This versatile tool automatically powers on/off and includes a convenient thumb knob for precise jaw adjustment and a zero reset button for easy calibration.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Pittsburgh Item 63731 Owner's manual
-
Pittsburgh 63711 Owner's manual
-
Pittsburgh 63655 Owner's manual
-
Pittsburgh Item 63586 Owner's manual
-
Pittsburgh 63710 Owner's manual
-
Pittsburgh Item 57397 Owner's manual
-
Pittsburgh Item 57315 Owner's manual
-
Pittsburgh 63714 Owner's manual
-
Pittsburgh Item 63730-UPC 193175357953 Owner's manual
-
Pittsburgh 64822 Owner's manual
Other documents
-
Quinn Item 57445-UPC 193175411631 Owner's manual
-
Harbor Freight Tools 12 in. Digital Caliper User manual
-
-
Ames Item 64015 Owner's manual
-
PITTSBURGH PRO 63711 Owner's manual
-
CEN-TECH Caliper 98851 Set Up And Operating Instructions Manual
-
Ames 64020 Owner's manual
-
WARRIOR Item 57366-UPC 792363573665 Owner's manual
-
-
Bauer Item 56725 Owner's manual
