Triax 310012 Operating instructions

Model Item no.

HMX Analyser 310012

Version EN

triax.com

HMX Analyser

HDMI 3D Mini Analyser

• The illustrations in this operation manual are for explanation and guidance purposes only.

• The examples used throughout this manual are based on the HMX Analyser.

Dear Triax customer

Thank you for purchasing the TRIAX HMX Analyser

To ensure safety and many years of trouble-free operation, please read the Important Safety

Precautions carefully before using this product.

Operating Manual

Contents

Safety Precautions 3

Introduction 4

Applications 4

Package Contents 4

System Requirements 4

Features 4

Operations Controls and Functions 5

Front Panel 5

Rear Panel 5

Top Panel 6

OSD Menu 7

System Info 7

Sink EDID 8

Source Infoframe 8

CEC Command 8

Audio Return 8

Deep Colour Set 8

Exit 8

OLED Display 9

Timing Table (Pattern Mode) 10

Support Pattern Table 11

Connection Diagram 13

Specications 14

Acronyms 15

• The illustrations in this operation manual are for explanation and guidance purposes only.

• The examples used throughout this manual are based on the HMX Analyser.

Dear Triax customer

Thank you for purchasing the TRIAX HMX Analyser

To ensure safety and many years of trouble-free operation, please read the Important Safety

Precautions carefully before using this product.

Operating Manual

Contents

Safety Precautions 3

Introduction 4

Applications 4

Package Contents 4

System Requirements 4

Features 4

Operations Controls and Functions 5

Front Panel 5

Rear Panel 5

Top Panel 6

OSD Menu 7

System Info 7

Sink EDID 8

Source Infoframe 8

CEC Command 8

Audio Return 8

Deep Colour Set 8

Exit 8

OLED Display 9

Timing Table (Pattern Mode) 10

Support Pattern Table 11

Connection Diagram 13

Specications 14

Acronyms 15

Important Safety Precautions

• Cleaning - Unplug the AC power from the mains supply before cleaning the product.

Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.

• Use a soft damp cloth to gently wipe the product when it is dirty. To protect the product,

do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the casing

of the product.

• Water and moisture - Do not expose the unit to wet or damp conditions.

• Donotplacevasesoranyotherwater-lledcontainersonthisproduct.

 Thewatermayspillontotheproductcausingreorelectricshock.

• Ventilation - The vents and other openings in the casing are designed for ventilation.

 Donotcoverorblocktheseventsandopeningssinceinsucientventilationcancauseoverheating

and/or shorten the life of the product. Do not place the product on a carpet or other similar surface,

since they can block ventilation openings. This product is designed for built-in Rack mount,

Desk- top installation; ensure proper ventilation is provided and the manufacturer’s instructions are

adhered to.

• Heat sources - Keep the product away from heat sources such as direct sunlight, radiators,

 heaters,stovesandotherheat-generatingproducts(includingampliers)unlessmountedcorrectly

in a Rack .

• Topreventre,neverplaceanytypeofcandleornakedamesonthetoporneartheproduct.

• Servicing - Do not attempt to service the product yourself. Removing covers can expose you to

electric shock and other dangerous conditions. Maintenance should be performed by the

 manufacturerorasuitablyqualiedperson.

The 3D mini HDMI Analyzer is a tool for checking both source and display devices. With

touchbuttoncontrolandbuilt-inOLED(OrganicLightEmittingDiode)itcanshowstatusof

both input and output device. The major purpose is to analyze input source info-frame and

output sink EDID. Another purpose is to use built-in pattern to test output device.

• Apparatus testing

• Equipment adjustment

• EDID checking

• HDCPverication

• Production testing

• R&D design

• 3D Mini HDMI Analyser

• Operating Manual

• 5V Power Adaptor

•

HDMI input port connected to the source/HDMI system with HDMI port and output connected to

the display/HDMI system with HDMI port.

Introduction

Applications

Package Contents

System Requirements

• Provides 25 timings, 6 patterns and 1 pattern for 3D timing

• Deepcolourvideo(upto12bits,1080p@60Hz)

• Supports input signal bypass, digital video formats in ‘Deep Colour’ Mode at up to 36

 bits(12bit/colour)andnewlosslesscompresseddigitalaudio(DolbyTrueHD,Dolby

 DigitalPlusandDTS-HDmasterAudio)

• Supports internal pattern audio LPCM 2CH 48/96/192KHz, LPCM 5.1CH 48/96KHz,

LPCM 7.1CH 48/96KHz.

• Analyse the input source info-frame and output sink EDID information

• Touch button control function

• OLED shows Input/Output timing information

• SupportARC(AudioReturnChannel)followingHDMIv1.4specications

• Supports‘DeepColour’(8/10/12-bit)output

• Supports HDCP repeater function and compliant with HDCP

• Supports CEC bypass

Features

The 3D mini HDMI Analyzer is a tool for checking both source and display devices. With

touchbuttoncontrolandbuilt-inOLED(OrganicLightEmittingDiode)itcanshowstatusof

both input and output device. The major purpose is to analyze input source info-frame and

output sink EDID. Another purpose is to use built-in pattern to test output device.

• Apparatus testing

• Equipment adjustment

• EDID checking

• HDCPverication

• Production testing

• R&D design

• 3D Mini HDMI Analyser

• Operating Manual

• 5V Power Adaptor

•

HDMI input port connected to the source/HDMI system with HDMI port and output connected to

the display/HDMI system with HDMI port.

Introduction

Applications

Package Contents

System Requirements

• Provides 25 timings, 6 patterns and 1 pattern for 3D timing

• Deepcolourvideo(upto12bits,1080p@60Hz)

• Supports input signal bypass, digital video formats in ‘Deep Colour’ Mode at up to 36

 bits(12bit/colour)andnewlosslesscompresseddigitalaudio(DolbyTrueHD,Dolby

 DigitalPlusandDTS-HDmasterAudio)

• Supports internal pattern audio LPCM 2CH 48/96/192KHz, LPCM 5.1CH 48/96KHz,

LPCM 7.1CH 48/96KHz.

• Analyse the input source info-frame and output sink EDID information

• Touch button control function

• OLED shows Input/Output timing information

• SupportARC(AudioReturnChannel)followingHDMIv1.4specications

• Supports‘DeepColour’(8/10/12-bit)output

• Supports HDCP repeater function and compliant with HDCP

• Supports CEC bypass

Features

Operation Controls and Functions - Front Panel

Rear Panel

1. HDMI IN:

This slot is where you plug your input

source equipment with HDMI cable

for source signal sending.

2. DC 5V:

This slot is where you plug the 5V

DC power supply into the unit and

connect the adaptor to an AC wall

outlet.

1. SERVICE:

 UseaD-Sub(RS232)to3.5mm

 (phonejack)cabletoperformthe

software upgrade

2. ARC OPTICAL OUT:

Optical digital out for testing the ARC

function of a TV connected to the

HDMI. Connect to the optical digital

input of an audio system (such as an

 AVreceiver)tomonitortheaudio

output of the attached sink device.

3. HDMI OUT:

The HDMI output connects the

Analyser to a Sink or Source device

to enable testing and checking the

capabilities of the system.

Top Panel

1. POWER:

Press the power button to turn the

 deviceOn/OtheLEDwillturnBlue

when powered On, and Red when in

standby mode.

2. INT/EXT:

Press this button to toggle between

the built-in internal pattern generator

and the external source device. The

 LEDwillturnBluewhentheexternal

input is selected. To retrieve the

external EDID information, an external

source device must be connected;

otherwise the device will only

generate the test patterns to display

on the TV/Monitor.

3. PC/HD/3D:

Press this button to cycle through the

 testpatterns(PC/HDor3Dtimings).

The OLED display will show the timing

currently selected.

4. AUDIO:

Press this button to select the audio

sample rate from LPCM 2CH, LPCM

5.1CH and LPCM 7.1CH 48kHz or

LPCM 2CH, LPCM 5.1CH and LPCM

7.1CH 96kHz or LPCM 2CH and

LPCM 5.1CH 192kHZ.

Note: Press and hold the Audio

button for 3 seconds to select the

Audio mute function.

5. M :

Press this button to enter the main

 menuand/ortoconrmtheselection.

6. PATTERN (UP/DOWN):

Press these keys to select the patterns

or when in OSD mode, press these

keys to select the option.

7. TIMING (UP/DOWN):

Press these keys to select the required

timings.

8. OLED DISPLAY:

This displays the relevant information

about the attached devices.

Please see section __ for details.

3 4 5 6 7

Top Panel

1. POWER:

Press the power button to turn the

 deviceOn/OtheLEDwillturnBlue

when powered On, and Red when in

standby mode.

2. INT/EXT:

Press this button to toggle between

the built-in internal pattern generator

and the external source device. The

 LEDwillturnBluewhentheexternal

input is selected. To retrieve the

external EDID information, an external

source device must be connected;

otherwise the device will only

generate the test patterns to display

on the TV/Monitor.

3. PC/HD/3D:

Press this button to cycle through the

 testpatterns(PC/HDor3Dtimings).

The OLED display will show the timing

currently selected.

4. AUDIO:

Press this button to select the audio

sample rate from LPCM 2CH, LPCM

5.1CH and LPCM 7.1CH 48kHz or

LPCM 2CH, LPCM 5.1CH and LPCM

7.1CH 96kHz or LPCM 2CH and

LPCM 5.1CH 192kHZ.

Note: Press and hold the Audio

button for 3 seconds to select the

Audio mute function.

5. M :

Press this button to enter the main

 menuand/ortoconrmtheselection.

6. PATTERN (UP/DOWN):

Press these keys to select the patterns

or when in OSD mode, press these

keys to select the option.

7. TIMING (UP/DOWN):

Press these keys to select the required

timings.

8. OLED DISPLAY:

This displays the relevant information

about the attached devices.

Please see section __ for details.

3 4 5 6 7

OSD Menu

System Info

• Press the M button on the analyser to display

the OSD.

• Press Pattern Up/Down Symbol to highlight the

required option

• Press these keys to select the required timings.

• PressMtoconrmtheselection.

• Press the M button to check the input/output

device information and software version

• Pressthe“SystemInfo.”Buttontodisplaythe

EDID information for any connected device.

When an output display is connected, press this

button repeatedly to bring up the patterns for

display (please refer to section __ for pattern

 details).

Sink EDID

CEC Command

Deep Colour Set

Exit

Source Infoframe

Audio Return

Option Description

Block Data To check the sink Block 0 and Block 1’s EDID table

Description To check the sink description of EDID

Option Description

Standby To set the source to standby mode

Active Source To turn on the source

Monitor To detect the command data on the CEC bus

Option Description

8-bit On/Off

10-bit On/Off

12-bit On/Off

Option Description

AVI (AVI Infoframe Data) To check the source video infoframe packet

AUD (Audio Infoframe Data) To check the source audio infoframe packet

Option Description

Audio Return On/Off

Note: the device will auto-detect the sink device’s ‘Deep Colour’ setting and if any of the

settings are not supported, the option in the Deep Colour set will not be selectable.

Select to exit the main menu.

Sink EDID

CEC Command

Deep Colour Set

Exit

Source Infoframe

Audio Return

Option Description

Block Data To check the sink Block 0 and Block 1’s EDID table

Description To check the sink description of EDID

Option Description

Standby To set the source to standby mode

Active Source To turn on the source

Monitor To detect the command data on the CEC bus

Option Description

8-bit On/Off

10-bit On/Off

12-bit On/Off

Option Description

AVI (AVI Infoframe Data) To check the source video infoframe packet

AUD (Audio Infoframe Data) To check the source audio infoframe packet

Option Description

Audio Return On/Off

Note: the device will auto-detect the sink device’s ‘Deep Colour’ setting and if any of the

settings are not supported, the option in the Deep Colour set will not be selectable.

Select to exit the main menu.

OLED Display

1. SAMPLING RATE:

The Analyser supports audio sampling rates of 48/96/192kHz, the display will show the

signals current sample rate. If external audio is selected the OLED will display

 ‘BYPASS’.

2, AUDIO CHANNELS:

The Analyser supports audio channels from LPCM 2, 5.1 and 7.1 CH. If external audio

 isselectedtheOLEDwilldisplay‘BYPASS’.

Note: When the audio button is held down for 3 seconds, both 1 & 2 will show AUDIO

MUTE.

3. ARC:

Audio Return Channel, when this function is selected the OLED display will show ‘ARC’

ID when an ARC signal is present.

4. V TIMING:

Please refer to the Timing Table on Page __ for details of the supported timing and V

sync.

5. H TIMING:

Please refer to the Timing Table on Page __ for details of the supported timing and H

sync.

6. 3D FORMAT:

Only when the 3D pattern is selected, the OLEDdisplay will show the pattern details.

Note: When in EXT Mode, the OLED display will show the input H/V Sync with the

timing frequency and 3D pattern if any.

Timing Table (Pattern Mode)

No. Resolution V Hz

T01 480p 60

T02 480i 60

T03 720p 60

T04 1080i 60

T05 1080p 60

T06 576i 50

T07 576p 50

T08 720p 50

T09 1080i 50

T10 1080p 50

T11 1080p 24

T12 640x480 60

T13 800x600 60

T14 1024x768 60

T15 1280x1024 60

T16 1920x1200 60

T17 720p (3D Frame Packing) 60

T18 720p (3D Side-by-Side) 60

T19 720p (3D Top-to-Bottom) 60

T20 720p (3D Frame Packing) 50

T21 720p (3D Side-by-Side) 50

T22 720p (3D Top-to-Bottom) 50

T23 1080p (3D Frame Packing) 24

T24 1080p (3D Side-by-Side) 24

T25 1080p (3D Top-to-Bottom) 24

Timing Table (Pattern Mode)

No. Resolution V Hz

T01 480p 60

T02 480i 60

T03 720p 60

T04 1080i 60

T05 1080p 60

T06 576i 50

T07 576p 50

T08 720p 50

T09 1080i 50

T10 1080p 50

T11 1080p 24

T12 640x480 60

T13 800x600 60

T14 1024x768 60

T15 1280x1024 60

T16 1920x1200 60

T17 720p (3D Frame Packing) 60

T18 720p (3D Side-by-Side) 60

T19 720p (3D Top-to-Bottom) 60

T20 720p (3D Frame Packing) 50

T21 720p (3D Side-by-Side) 50

T22 720p (3D Top-to-Bottom) 50

T23 1080p (3D Frame Packing) 24

T24 1080p (3D Side-by-Side) 24

T25 1080p (3D Top-to-Bottom) 24

Support Pattern Table

Connection Diagram

DVD or BluRay

Monitor or 3DTV

Monitor or 3DTVAmplier

In order to check both the Source

and Display device’s information,

press the M to display the System

Information.

In order to check the display device’s

supported timings, connect the HDMI output to

the display device and press the PATTERN and

TIMING buttons.

Specications

TMDS Clock Frequency 225MHz

Input Port 1 x HDMI (Female Type)

Output Port 1 x HDMI (Female Type)

EXT Mode (HDMI Input)

HDMI Resolution 480i/p, 576i/p, 720p-1080p

PC Resolution VGA-WUXGA

3D Resolution Support all 3D timing

INT Mode (Internal Pattern)

HDMI Resolution 480i/p, 576i/p, 720p-1080p

PC Resolution VGA-SXGA, WUXGA

3D Resolution Frame Packing (1080p@24,720p@50/60)

Side-by-Side (Half) (1080p@24, 720p@50/60)

Top-and-Bottom (1080p@24, 720p@50/60)

Audio Format

480i/p, 576i/p or VGA-SVGA support LPCM 2CH

48/96/192kHz LPCM 5.1CH 48kHz. LPCM 7.1CH 48kHz,

720p-1080p or XGA-WUXGA support LPCM 2CH,

48/96/192kHz LPCM 5.1CH 48/96kHz, LPCM 7.1CH,

48/96kHz

HDMI Cable In 1080p/8bits 15M, 1080p/12bits 10M

HDMI Cable Out 1080p/8bits 15M, 1080p/12bits 10M

ESD Protection

Human Body Model: ±8kV (air-gap discharge)

±8kV (air-gap discharge)

Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certied)

Dimensions (mm) 119.5 (W) x 70 (D) x 25 (H)

Weight (g) 128

Chassis Material Plastic

Silkscreen Colour Black

Storage Temperature -20°C~60°C / -4°F~140°F

Operating Temperature 0°C~40°C / 32°F~104°F

Relative Humidity 20-90% RH (non-condensing)

Power Consumption (W) 4W (Max)

Note:

A. This system was tested with 24AWG cables. If using cables of another type the

performance of this system may be different.

B. Cable distance tested with a PS3 & 40” Samsung UA40B700 12-bits LED TV.

C. Figures provided in this manual are for reference only, actual gures may depend

on the source and display used along with the cables specications.

Specications

TMDS Clock Frequency 225MHz

Input Port 1 x HDMI (Female Type)

Output Port 1 x HDMI (Female Type)

EXT Mode (HDMI Input)

HDMI Resolution 480i/p, 576i/p, 720p-1080p

PC Resolution VGA-WUXGA

3D Resolution Support all 3D timing

INT Mode (Internal Pattern)

HDMI Resolution 480i/p, 576i/p, 720p-1080p

PC Resolution VGA-SXGA, WUXGA

3D Resolution Frame Packing (1080p@24,720p@50/60)

Side-by-Side (Half) (1080p@24, 720p@50/60)

Top-and-Bottom (1080p@24, 720p@50/60)

Audio Format

480i/p, 576i/p or VGA-SVGA support LPCM 2CH

48/96/192kHz LPCM 5.1CH 48kHz. LPCM 7.1CH 48kHz,

720p-1080p or XGA-WUXGA support LPCM 2CH,

48/96/192kHz LPCM 5.1CH 48/96kHz, LPCM 7.1CH,

48/96kHz

HDMI Cable In 1080p/8bits 15M, 1080p/12bits 10M

HDMI Cable Out 1080p/8bits 15M, 1080p/12bits 10M

ESD Protection

Human Body Model: ±8kV (air-gap discharge)

±8kV (air-gap discharge)

Power Supply 5V/1A DC (US/EU standards, CE/FCC/UL certied)

Dimensions (mm) 119.5 (W) x 70 (D) x 25 (H)

Weight (g) 128

Chassis Material Plastic

Silkscreen Colour Black

Storage Temperature -20°C~60°C / -4°F~140°F

Operating Temperature 0°C~40°C / 32°F~104°F

Relative Humidity 20-90% RH (non-condensing)

Power Consumption (W) 4W (Max)

Note:

A. This system was tested with 24AWG cables. If using cables of another type the

performance of this system may be different.

B. Cable distance tested with a PS3 & 40” Samsung UA40B700 12-bits LED TV.

C. Figures provided in this manual are for reference only, actual gures may depend

on the source and display used along with the cables specications.

Acronyms

Acronym Complete Term

3D 3 Dimension

ARC Audio Return Channel

EDID Extended Display Identication Data

HD High Denition

HDCP High-Bandwidth Digital Content Protection

HDMI High-Denition Multimedia Interface

SD Standard Denition

are registered trademarks or trademarks of the TRIAX Company or its afliates.

All specications in this guide are subject to change without further notice.

TRIAX A/S | Bjørnkærvej 3 | DK-8783 Hornsyld | Denmark

triax.com/support

Triax 310012, HMX Analyser Operating instructions

Related papers

Other documents