Sony XS-L830SL Operating instructions

Type
Operating instructions
3-046-371-11 (1)
Installation/Connections
Subwoofer
Sony Corporation 2000 Printed in TAIWAN, R.O.C.
XS-L830SL
Dimensions
Unit: mm
ø197 99.5
ø209
ø178
Power amplifier
Car audio
Speaker
system
Electronic crossover network
Power amplifier
Right
Left
XS-L830SL
Subwoofer
Connections
Specifications
Speaker Woofer 20 cm, cone type
Maximum input power 350 watts
Rated input power 100 watts
Impedance 4 ohms
Sensitivity 87 dB/W/m
Frequency response 30 – 4,000 Hz
Mass Approx. 2.7 kg per speaker
Supplied accessory Parts for installation
Thiele/small parameters
Recommended Enclosure : Sealed type
d (mm)
Sd (cm
2
)
Rdc (ohm)
Fs (Hz)
Qts
Qes
Qms
Vas (Lit.)
Mms (g)
Lvc (mH)
Xmax (mm)
BL (Tm)
Enclosure vol. (Net)
165
214
3.6
34.4
0.85
1.03
4.98
19.1
76.5
0.7
4
7.4
15 Lit.
Frequency response
Sound Pressure Level (dB)
Frequency (Hz)
Sealed Enclosure
Anechoic room
15 Lit.
1 m, 1 w
20
40
50
60
70
80
90
100
50 100 200 500 1 k 2 k 5 k
ø5.5
Speaker cord (not supplied)
Speaker cord
Precautions
Be careful not to operate the speaker system
with power exceeding its power handling
capacity.
Keep recorded tapes, watches, and credit cards,
etc. with magnetic coding away from the
speaker system to prevent damage caused by
the magnets in the speakers.
Installation
Parts List
1 23
ø5 × 25 mm
× 8
3
2
3
1
2
Example
3
Unit: mm
Red ring: e
Black ring: E
ø179
When installing the unit, be careful not to
damage the diaphragm with your hand or tools.
The subwoofer is heavy, so attach it firmly to a
thick, solid baffle plate or metal board.
c
ø3.2
1
Unit: mm
11
  • Page 1 1
  • Page 2 2

Sony XS-L830SL Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI