Asco Series 541 542 543 M12 Connection Owner's manual

Type
Owner's manual
2
3834809
A
B
E
D
C
2
3
4
(14)
(12)
A
E
3
4
F
Bistable
valves
Monostable
valves
Installation
M12 CONNECTION ON ISO 1 - 2 - 3 SPOOL VALVES
Pad mounting ISO 1 - 2 and 3 spool valves with a M12 connector with 3 contacts have the following advantages:
• Small size (miniature series 302 pilot valve)
• Shorter connection time and lower cost
• Built-in electrical display and protection
• Provision for instantaneous electrical disconnection
Centralised electrical connection
by M12 connector
Conventional connection
by two size 30 connectors (to ISO4400)
DISPLAY AND CONNECTION OF M12 CONNECTOR (24V DC only)
A: Operator pilot valve (14)
B: Yellow LED indicating energisation of pilot valve
14 (operator)
C: Return pilot valve (12), bistable or 5/3
D: Yellow LED indicating energisation of pilot valve
12 (return)
E: Bulkhead connector, 3 male contacts, CNOMO
E03.62.520N, for electrical connection of two
pilot valves.
F: Yellow LED indicating energisation of pilot valve.
NOTE: The built-in electrical protection is provided
by bi-directional Transil diodes.
Assignment is as per ISO/CD20401
standard.
Contact Connection
2 = Coil 12
3 = Common (0V)
4 = Coil 14
Monostable spool valves Bistable and 5/3 spool valves
14
4
3
14
4
3
2
12
GB
5
1
3
(14)
(12)
!
For the versions with M12 connector, we recommend using the more compact-sized right-angle
connectors which have a smaller bend radius than a straight connector (reduction of strain).
Catalogue number of right-angle connector: 88130213 (with 5 m cable)
Catalogue number of straight connector: 88130212 (with 5 m cable)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Asco Series 541 542 543 M12 Connection Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI