Russell Hobbs 21772-70 User manual

Type
User manual
2
1. filter
2. guides
3. lid
4. lid lock
5. handle
6. switch
7. stand
8. light
5
1
max
2
3
4
8
7
 max 
1
0
6
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been supervised/instructed and understand the hazards
involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be done by children unless they are
older than 8 and supervised.
Keep the appliance and cable out of reach of children under 8 years.
h
Parts of the appliance will get hot during use.
If you overfill, the kettle may spit boiling water.
Use the kettle only with the stand supplied (and vice versa).
If the cable is damaged, it must be replaced by the manufacturer, its service
agent, or someone similarly qualified, to avoid hazard.
Don’t put the kettle, stand, cable, or plug in any liquid.
Don’t use the kettle for any purpose other than heating water.
Don’t operate the appliance if it’s damaged or malfunctions.
HOUSEHOLD USE ONLY
DIAGRAMS
3
FILLING
1. Remove the kettle from the stand.
2. Press the lid lock to open the lid.
3. Fill with at least 2 cups of water, but not above max.
4. If you overfill, the kettle may spit boiling water.
5. Close the lid, and press down to lock it.
SWITCHING ON
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
4. Move the switch to I. The light will glow.
SWITCHING OFF
1. When the water boils the kettle will switch off.
2. To switch off, move the switch to O, or lift the kettle off the stand.
GENERAL
When you lift the kettle, you may see moisture on the stand. Don’t worry – it’s the steam used to
switch off automatically, which then condenses and escapes via vents under the kettle.
You may see some discolouration on the floor of the kettle. Again, don’t worry – it’s due to the
bonding of the element to the kettle floor.
USING WITH INSUFFICIENT WATER
This will shorten the life of the element. A boil-dry cut-out will switch the kettle off.
You must then remove the kettle from its stand to reset the cut-out.
Sit the kettle on the work surface till it’s cold.
CARE AND MAINTENANCE
1. Unplug the stand, and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Open the lid.
4. Slide the filter up and out of the guides.
5. Rinse the filter under a running tap while brushing with a soft brush.
6. Slide the filter down, into the guides.
7. Close the lid.
Descale regularly, (at least monthly).
Use a proprietary descaler. Follow the instructions accompanying the descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
W
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous substances in electrical and
electronic goods, appliances marked with this symbol mustn’t be disposed of with unsorted municipal
waste, but recovered, reused, or recycled.
instructions
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Russell Hobbs 21772-70 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI